Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
... External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact with bearings preventing shear and frictional ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C
... ECO.pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO.pump lends itself to many common applications. The stainless steel body and compact design allow the pump to be used as an in-line device and maintain a rust ...
Flow: 0 m³/h - 1,000 m³/h
Pressure: 16 bar
Head: 0 m - 250 m
... Description
The NCT is a volute casing submersible pump with shaft seal based on the two-pipe principle (separate shaft guide pipe and pressure pipe). The hydraulic pump section is located in the container or in the pumped medium and is connected ...
Pressure: 10, 30 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, consistent and ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, shear sensitive and high-filled ...
Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m
TOPSFLO micro diaphragm liquid /vacuum pumps are based on a simple principal, the circular power from the motor is converted into oscillating movement by an eccentric, which moves up and down its central point, this motion is then transfer redto a diaphragm ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 24, 20, 19, 17 l/min
Head: 11, 8, 6 m
Power: 24 W - 48 W
... ♦ 16000㎡ modern factory with its own physical property rights, ESD anti-static control dust free workshop,100+ sets of professional imported equipment ♦ 4 major professional and precision laboratories that meet the CNAS national laboratory accreditation ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 22, 19 l/min
Head: 11, 8 m
Power: 48, 36 W
... ♦ 16000㎡ modern factory with its own physical property rights, ESD anti-static control dust free workshop,100+ sets of professional imported equipment ♦ 4 major professional and precision laboratories that meet the CNAS national laboratory accreditation ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.038 l/min - 0.67 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 0.58 kg
A2V Mécatronique
Flow: 1.3 l/min - 1.8 l/min
Fluid temperature: 0 °C - 40 °C
Input diameter: 4.5 mm - 5.5 mm
A2V Mécatronique
Flow: 0.41 l/min - 1.6 l/min
Fluid temperature: 0 °C - 40 °C
A2V Mécatronique
Flow: 800, 700 m³/h
Head: 102, 80 m
Power: 90 kW
... IN-LINE PUMPS Safe, highly efficient, adaptable and durable, the L range of in-line pumps with in-line fittings can pump fluids of up to 140°C as standard. They are used for circulation of hot and cold water for installation in civil and industrial heating ...
Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W
The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, it operates with an utmost pressure of 0.18 ...
Nitto Kohki Europe
Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W
The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure and 0.1 bar rated pressure. It requires 27 W power and its rated ...
Nitto Kohki Europe
Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar
... The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum free air displacement. It is equipped with a 6mm ...
Nitto Kohki Europe
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two gear shafts in the tooth gaps along the housing wall. ...
Pressure: -0.4 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
... DuroTec® gear pumps KP 1 for abrasive and poor lubricating fluids. The limit of applications of transfer gear pumps has been reached when the transfer medium does not have the required lubricity for a proper function of the pump and a high working ...
Flow: 0 l/h - 204 l/h
Pressure: 0 bar - 2 bar
Panel mounted tube pumps for OEM applicationsThe Verderflex OEM range of tube pumps are designed for panel mounting or incorporation into 3rd party machines that need an accurate, low maintenance dosing solution that can be found in many applications ...
Verder Liquids
Flow: 0 l/min - 0.06 l/min
Pressure: 0 bar - 2 bar
Power: 20 W
... The Verderflex Economy EV045 is simple to use, 'no frills' range of cased drive tube pumps. Ideal for benchtop use in laboratories and process environments. The Verderflex Economy range of peristaltic tube pumps are simple to use, 'no frills' range ...
Verder Liquids
Flow: 0 l/min - 0.185 l/min
Pressure: 0 bar - 2 bar
Power: 20 W
... The Verderflex Economy EV500 is simple to use, 'no frills' range of cased drive tube pumps. Ideal for benchtop use in laboratories and process environments. The Verderflex Economy range of peristaltic tube pumps are simple to use, 'no frills' range ...
Verder Liquids
Flow: 1.5 l/min
Power: 50 W
... The rotarus ® standard is the powerful basic model of the hose pump series. This affordable, accurate delivery pump for low flow rates and high viscosities can be used flexibly by using various pump heads and tubing. Using the control panel on the housing, ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 5.4 l/min
Power: 100 W
The rotarus® standard100 series is the powerful basic model of the hose pump series. The cost, fast delivery pump for high flow rates can be used flexibly by using various pump heads and tubing. Using the control panel on the housing, the main parameters ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 10 l/min - 350 l/min
Power: 30 W
rotarus® smart 30, precise delivery pump with DC motor and speed range of 10-350 rpm. Ideal for the delivery of low-viscosity media. The speed can be programmed directly on the unit. The control panel on the housing enables simple and rapid configuration ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 14 l/min - 26 l/min
... Overview
The OTAL® hand pump PP is a compact, universal, manually operated pump for filling and transferring liquids from containers and drums. It works on the air-over-pressure principle so that only the delivery tubes contact the ...
Bürkle
Flow: 10 l/min
... The solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction that is capable of holding a capacity up to 60 L. This pump ...
Bürkle
Flow: 14 l/min
... OTAL® foot pump with disposable HDPE delivery tubes, for single use.
With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube.
The disposable delivery tube can be replaced quickly and easily after use.
With ...
Bürkle
The SATURN Sequence Timer serves test labs as a high-precision digital control unit, also called "Trigger Generator", "Timer" or simply "Sequencer". It provides flexible and safe control of the test facility and/or unit under test by precisely timed operation ...
Flow: 0.3 m³/h - 90 m³/h
Power: 0.55 kW - 37 kW
... Working principle
The rotor pump relies on two synchronous and counter-rotating rotors to generate suction (vacuum) at the inlet during rotation, thereby drawing in the material to be conveyed
Selection instructions ...
Flow: 3 m³/h - 90 m³/h
Pressure: 0.85 bar
Head: 10 m - 80 m
... The sine pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet and outlet of ...
Flow: 5 m³/h - 30 m³/h
Head: 10, 15, 18, 20 m
Power: 1.5, 4, 5.5, 7.5 kW
... CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in valve body,
which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement pump, its features are superior to centrifugal ...
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...
HNP Mikrosysteme GmbH
... NIMBL’BOT makes Highly Redundant Robotic easy with AI to mechanize Testing, Inspection, Manufacturing and Maintenance Operations. Fast build advanced applications with AI-driven complex kinematics. Prevent operator Health, Safety and Security from Risks ...
... The NB-120Ai Operator Serie is range of products pre-integrated to perform advanced Manufacturing and Maintenance tasks. The solution can be configured and tuned to comply with variety of industrial situations and specifications. The solution can be ...
Flow: 0.0001 l/min - 1 l/min
Pressure: 15 MPa
Width: 276 mm
The ECP201L Preparative Pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed. The pump with 4 low-pressure valves delivers a flow rate of up to 1000 ml/min at a very high output pressure ...
ECOM
Flow: 0.001 l/min - 10 l/min
Pressure: 40 MPa
Width: 280 mm
... This pump works as isocratic pump and together with ECB2004B, ECB2004BP (ECB2007, ECB2007PC) Gradient Box with Degasser (without Degasser) also as gradient pump. ECB2004B, ECB2004BP (ECB2007, ECB2007PC) Gradient Box with Degasser (without Degasser) is ...
ECOM
Flow: 0.00001 l/min - 0.01 l/min
Pressure: 60 MPa
Width: 280 mm
... This pump works as an isocratic pump and together with an ECB2004B, ECB2004BP (ECB2007, ECB2007PC) Gradient Box with Degasser (without Degasser), also as a gradient pump. ECB2004B, ECB2004BP (ECB2007, ECB2007PC) Gradient Box with Degasser (without Degasser) ...
ECOM
... Biotage® PrepXpert-8 automates PFAS and environmental sample preparation with dual-method flexibility, traceability, and seamless workflow integration. - Built for PFAS precision: Designed with minimal fluorinated materials in the flow path, Biotage® ...
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures in closed circuit systems. Operation ...
Flow: 0.01 l/min - 0.7 l/min
Pressure: 0.5 bar - 20 bar
Fluid temperature: -40 °C - 100 °C
... Overview
MPC010 micro magnetic drive gear pump is driven by a 57 stepper motor and is designed for precise metering at low flow rates (10–700 ml/min typical) and pressures up to application-dependent values (0.5–20 bar). The magnetic drive and ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0.02 l/min - 2 l/min
Pressure: 0.5 bar - 20 bar
Fluid temperature: -40 °C - 100 °C
... Overview
The MPB015 micro magnetic drive gear pump uses magnetic coupling to create a fully sealed pumping chamber, delivering leak-free operation with negligible pulsation. It offers low noise, compact dimensions and a long service life. Designed ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 45 l/min - 100 l/min
Pressure: 0.5 bar - 5 bar
Fluid temperature: -40 °C - 100 °C
... Product Overview
The magnet-drive MPB1000 micro magnetic gear pump provides a fully sealed pump chamber with no pulsation, no leakage and low noise. Compact and high-performance, it is designed for precise metering and continuous transfer. Typical ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 3.6 l/h
Pressure: 0 bar - 20 bar
... Flow Rates: 0.625 µl/min - 60mL/min Pressure: Up to 20 bar Material: Glass syringe with PCTFE Applications: Grignard chemistry, lithiation reactions, other orgnometallic reactions, etc. Can handle corrosive chemicals Pulseless and continuous ...
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
... SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • Easy cleaning – no contact of liquid and mechanical ...
Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm
The IPS-12 is a versatile and programmable single-channel pump designed to meet a wide range of fluid handling needs. With its robust capabilities and precision performance, it stands as a reliable solution for various applications in research, pharmaceuticals, ...
Flow: 0.01789 l/min - 0.12159 l/min
Fluid temperature: -30 °C - 85 °C
Length: 257 mm
The IPS-14R Syringe Pump is a cutting-edge dual-channel device designed to provide precise and reliable fluid handling in various applications. With its innovative features and robust construction, the IPS-14R offers versatility and accuracy for demanding ...
Flow: 24 l/min
Pressure: 7 bar
Head: 70 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of the fluid (Flow ...
Flow: 110 l/min
Pressure: 8 bar
Head: 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of the fluid (Flow ...
Inteliwasher 3D-IW8 series microplate washer is designed for washing various types of standard 96-well microtitre plates, microstrips as well as microarrays on FastFRAME (rectangular well shape). It is suitable for washing wells with different bottom ...
Intelispeed Washer IW-8 is designed for washing of standard flat-bottom 96 well plates and microstrips. The unit is fully programmable ensuring multi-step solution ripening, aspiration (aspiration, combination of aspiration/liquid dispensing and soaking, ...
... Dumbbell Specimen Maker Overview This instrument is suitable for processing all kinds of plates, profiles, pipes or profiles for tensile test, thermal deformation test, impact test and other test splines. According to the user's order, all kinds of ...
This instrument is suitable for processing all kinds of plates, profiles, pipes or profiles for tensile test, thermal deformation test, impact test and other test splines. According to the user's order, all kinds of templates required by the order can ...