Laboratory automation equipment

Flow: 7 l/min
Pressure: 130 mbar
Power: 19 W

... Adjustable speed control Outstandingly easy to use Small footprint to optimize workspace Maintenance-free Very compact, chemically resistant and oil-free diaphragm vacuum pump with manual speed control for adjusting the pump capacity to your specific ...

Flow: 0 m³/h - 0.078 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 2.7 m

... Product overview
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey neutral and aggressive liquids without contaminating the fluid. They are maintenance-free, ...

Flow: 0 m³/h - 0.048 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 3 m

... Product Overview
KNF diaphragm liquid pump FP 1.70 combines a compact design with chemically resistant materials to transfer, dose and measure neutral and aggressive liquids without contamination. The pump is self-priming, capable of dry-running, ...

... Vitrified frozen structures are extremely sensitive to environmental influences and need to be protected from the formation of artefacts. Prepare your samples for detailed image evaluation under optimal conditions: • - Cold shield around the sample avoids ...

... With Leica EM VCT500 you can transfer samples under cryogenic conditions or at room temperature as well as under vacuum or protected atmosphere. Leica EM VCT500 Stay Connected • - Connect your workflow systems • - Optimize your sample transfer thanks ...

Ensure the ultrastructures of your tissue samples can be precisely compared every time by preparing them with the EM TP tissue processor. With the EM TP you can be confident that tissue differences between samples observed with your light microscope (LM) ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 7 m
Power: 200 W

... Acid pump - B2 Vario PP The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 8 m
Power: 260 W

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is ...

Flow: 0 l/min - 45 l/min
Head: 0 m - 8 m
Power: 260 W

... Acid pump - B2 Battery PVDF 0207-080 The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves ...

... Gentle, effective hydrocarbon removal for cleaner SEM and TEM imaging

• UV-based cleaning with no need for chemicals or gas supplies
• Fast, damage-free removal of hydrocarbon contamination
• Touchscreen interface with recipe

... Advanced ion milling for fast, high-quality SEM sample preparation.

• High milling rate: Fast and efficient sample preparation for hard materials
• Cross-section & flat milling: Flexible options for different applications
• Cryogenic

... Overview
The Hitachi IM4000II and IM5000 ion milling systems deliver precision sample preparation for scanning electron microscopy (SEM) and related surface-analysis techniques. Suitable for metals, semiconductors, polymers, ceramics and multilayer ...

The 869 Compact Sample Changer offers the rapid and simple automation of Titrino plus applications in a very small space. For low numbers of multiple determinations or small sample series, this sample changer is just the right choice. Various titrations ...

The 885 Compact Oven Sample Changer is used for thermal sample preparation in Karl Fischer titration. In the oven the samples can be heated up to 250°C. The moisture contained in the sample evaporates and is transported by a dry carrier gas into the titration ...

... The 860 KF Thermoprep is designed for thermal sample preparation in Karl Fischer titration. Numerous substances cannot be analysed by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer reagent or release their water ...

Flow: 0 l/min - 197 l/min
Pressure: 8.3 bar
Weight: 9.4 kg - 19.9 kg

ARO EXP 1” metallic diaphragm pumps achieve flow rates of up to 52.2 GPM (197.6 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Industrial, Chemical ...

Flow: 0 l/min - 651 l/min
Pressure: 8.3 bar

... ARO EXP 2” metallic diaphragm pumps achieve flow rates of up to 172 GPM (651 l/min) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, ...

Flow: 0 l/min - 49.2 l/min
Pressure: 0 bar - 6.8 bar
Weight: 4, 3.3, 4.3, 4.6 kg

... Part of our Compact Series of pumps, our 1/2” classic pumps feature big performance in a small package. With flow rates up to 13 GPM (49.2 LPM) and a wide range of material and porting configurations. Features ARO has the world's best selling ...

... Elevate your laboratory workflow with the epMotion® 96 Flex, combining advanced technology with user-friendly design for unparalleled performance. Process 96- and 384-well plates with ease and enjoy flexibility with an exchangeable dispensing head design ...

... Increase your productivity and pipet whole 96-well plates at once. Just make it faster and more precise. The epMotion 96 overcomes the limits of manual multichannel pipetting. Save time and money while getting better reproducibility of your results from ...

Our smallest member of the epMotion family is the most compact solution for accurate and reproducible automated pipetting. This makes the epMotion 5070 a perfect match for any routine application such as PCR and qPCR set up, serial dilutions, reagent ...

... Frees you from routine pipetting and provides excellent results The use of electronic pipettes helps to increase throughput in today’s laboratories. However, prolonged manual pipetting takes up precious time, and can lead to repetitive strain injuries. ...

... Pipette design and good pipetting practice have always been in the focus to improve ergonomics and reproducibility of pipetting. For the design of the ASSIST, INTEGRA kept these critical factors in mind but went even a step further: by automating our ...

... Toss the insert and keep the base, saves you money and saves you space! Reagent reservoirs are used by many laboratories for the temporary storage of reagent during pipetting applications. However many reservoirs have flimsy troughs, graduations that ...

Pressure: 5 psi
Power: 2 W - 2.5 W
Length: 54 mm

This miniature (16 mm), solenoid-driven fixed volume dispense pump is available in 50 µL standard models, with other dispense volumes available upon request. Featuring a compact, chemically inert, self-priming design, this pump aspirates an accurate volume ...

Pressure: 95, 60 psi
Input diameter: 0.3 in
Width: 42.9 mm

LPD Series variable volume dispense pumps are a new generation of stepper motor driven, positive displacement pumps designed to provide unparalleled reliability a nd performance at an economical price. The LPD Series are available in standard dispense ...

Power: 7 W
Fluid temperature: -1 °C - 49 °C
Length: 87 mm

This compact (25 mm), solenoid-driven fixed volume dispense pump is available in 100 µL and 175 µL standard models, with other dispense volumes available upon request. Featuring a compact, chemically inert, self-priming design, this pump aspirates an ...

Flow: 12 l/min - 60 l/min
Head: 8.5 m

The small battery drum pump COMBIFLUX FP 314 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. With IP 44, it is protected against splash water and therefore also ideally suited ...

Flow: 17 l/min - 47 l/min
Head: 6.8 m

The small drum pump JUNIORFLUX F 310 with fixed commutator motor and mechanical seal is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows ...

Flow: 27 l/min - 57 l/min
Head: 8.5 m

The small sealless drum pump JUNIORFLUX F 314 with fixed commutator motor is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

... PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” color ...

Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW

... PERISTALTIC METERING PUMP (KM3) - ALBIN PUMP Specifications: Flow rate: up to 126 l/h (33 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” ...

Flow: 108 l/h - 600 l/h
Pressure: 6.9, 3.4, 2.1, 4.5 bar
Power: 0.3 kW

... PERISTALTIC METERING PUMP (KM4) - ALBIN PUMP Specifications: Flow rate: up to 600 l/h (158.5 gph) Discharge pressure: up to 6.9 bar (100 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” ...

Flow: 14 l/min - 26 l/min

... Overview
The OTAL® hand pump PP is a compact, universal, manually operated pump for filling and transferring liquids from containers and drums. It works on the air-over-pressure principle so that only the delivery tubes contact the ...

Flow: 10 l/min

... The solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction that is capable of holding a capacity up to 60 L. This pump ...

Flow: 20 l/min - 30 l/min

... Short description

• Compact universal pump with easy operation. Universal plug allows use with all common containers.
• Cost-effective pump, resistant to weak acids, alkalis and cleaning agents.
• Foot-operated, leaving

Flow: 10 l/min
Pressure: 0.3 bar - 2.5 bar
Fluid temperature: 180 °C

... - Analytical diaphragm pump for hot gas measurement - Pump head electrically heated up to +180 °C [+356 °F] - With high-temperature limiter and low-temperature alarm function - Max. capacity: 10 Nl/min at +180 °C [+356 °F], without pressure - Corrosion-resistant - ...

Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m

TOPSFLO micro diaphragm liquid /vacuum pumps are based on a simple principal, the circular power from the motor is converted into oscillating movement by an eccentric, which moves up and down its central point, this motion is then transfer redto a diaphragm ...

Flow: 24, 20, 19, 17 l/min
Head: 11, 8, 6 m
Power: 24 W - 48 W

... ♦ 16000㎡ modern factory with its own physical property rights, ESD anti-static control dust free workshop,100+ sets of professional imported equipment ♦ 4 major professional and precision laboratories that meet the CNAS national laboratory accreditation ...

Flow: 22, 19 l/min
Head: 11, 8 m
Power: 48, 36 W

... ♦ 16000㎡ modern factory with its own physical property rights, ESD anti-static control dust free workshop,100+ sets of professional imported equipment ♦ 4 major professional and precision laboratories that meet the CNAS national laboratory accreditation ...

Flow: 0.038 l/min - 0.67 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 0.58 kg

Flow: 1.3 l/min - 1.8 l/min
Fluid temperature: 0 °C - 40 °C
Input diameter: 4.5 mm - 5.5 mm

Flow: 0.41 l/min - 1.6 l/min
Fluid temperature: 0 °C - 40 °C

Inteliwasher 3D-IW8 series microplate washer is designed for washing various types of standard 96-well microtitre plates, microstrips as well as microarrays on FastFRAME (rectangular well shape). It is suitable for washing wells with different bottom ...

Intelispeed Washer IW-8 is designed for washing of standard flat-bottom 96 well plates and microstrips. The unit is fully programmable ensuring multi-step solution ripening, aspiration (aspiration, combination of aspiration/liquid dispensing and soaking, ...

Flow: 24 l/min
Pressure: 7 bar
Head: 70 m

... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of the fluid (Flow ...

Flow: 110 l/min
Pressure: 8 bar
Head: 80 m

... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of the fluid (Flow ...

Flow: 800, 700 m³/h
Head: 102, 80 m
Power: 90 kW

... IN-LINE PUMPS Safe, highly efficient, adaptable and durable, the L range of in-line pumps with in-line fittings can pump fluids of up to 140°C as standard. They are used for circulation of hot and cold water for installation in civil and industrial heating ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

... External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact with bearings preventing shear and frictional ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C

... ECO.pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO.pump lends itself to many common applications. The stainless steel body and compact design allow the pump to be used as an in-line device and maintain a rust ...

Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...

Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...

Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring ...

... Biotage® PrepXpert-8 automates PFAS and environmental sample preparation with dual-method flexibility, traceability, and seamless workflow integration. - Built for PFAS precision: Designed with minimal fluorinated materials in the flow path, Biotage® ...

Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m

... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures in closed circuit systems. Operation ...

Flow: 3.6 l/h
Pressure: 0 bar - 20 bar

... Flow Rates: 0.625 µl/min - 60mL/min Pressure: Up to 20 bar Material: Glass syringe with PCTFE Applications: Grignard chemistry, lithiation reactions, other orgnometallic reactions, etc. Can handle corrosive chemicals Pulseless and continuous ...

Pressure: 10, 30 bar

... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, consistent and ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, shear sensitive and high-filled ...

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

... SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • Easy cleaning – no contact of liquid and mechanical ...