Other measuring devices

1,260 companies | 5,855 products
contact angle measuring device
contact angle measuring device

Machine “TYPE 1” Dimension range: Bearings Ø 20 – 180 mm. Height 4 – 40 mm. Machine “TYPE 2” Dimension range: Bearings Ø 100 – 360 mm. Height 16 – 58 mm. Performances: • Ball presence check ( except for blind bearings) • ...

satellite antenna
satellite antenna
HyperLOG® 30350

Frequency: 380 MHz - 35,000 MHz
Gain: 0 dB - 6 dB

The Directional Antennas of the HyperLOG® series 30xx are based on an ultra-thin, GOLD COATED high tech TEFLON substrate. Based on this innovative construction, the frequency range could yet again be vastly extended compared to the 40xx ...

See the other products
Aaronia AG
satellite antenna
satellite antenna
HyperLOG® 30250

Frequency: 380 MHz - 25,000 MHz
Gain: 0 dB - 6 dB

The Directional Antennas of the HyperLOG® series 30xx are based on an ultra-thin, GOLD COATED high tech TEFLON substrate. Based on this innovative construction, the frequency range could yet again be vastly extended compared to the 40xx ...

See the other products
Aaronia AG
radio antenna
radio antenna
HyperLOG® 20600 EMI

Frequency: 20 MHz - 6,000 MHz
Gain: 0 dB - 8 dB

Ultimate EMC/EMI pre-compliance test antenna for the pro user. Unmatched ultra high accuracy. Very high gain over the full frequency range. Meets latest EMC standards up to 6 GHz. The HyperLOG 20600 EMI is Aaronias latest antenna development ...

See the other products
Aaronia AG
laboratory test system
laboratory test system
VT / VK series

RS-Simulation Asia’s vibration testing system is used to evaluate the performance of industrial products against vibrations. It generates vibrations according to parameters such as arbitrary force, acceleration, and frequency, and can ...

test system on site
test system on site
ECTS2 series

The Pacific Power Source EMC Compliance Test Systems use a sophisticated Harmonics and Flicker measurement system and newly designed flicker impedance options to support single and three phase IEC 61000-3-XX AC – Power Line Harmonics ...

ground bond tester
ground bond tester
266

Our 266 Model makes Ground Bond / High Continuity Testing simple with 60 Amps of current to satisfy your toughest NRTL standard. With an intuitive interface that allows you to set-up a test in seconds and practical security settings, ...

See the other products
SCI
AC tester
AC tester
264

40 Amp AC Ground Bond Tester, CE Listed Our 264 Model makes Ground Bond / High Continuity Testing simple with 40 Amps of current to satisfy your NRTL standard. With an intuitive interface that allows you to set-up a test in seconds ...

See the other products
SCI
safety tester
safety tester
446

5kV @ 20mA AC Hipot, 6kV @ 5mA DC Hipot, Insulation Resistance, 40A AC Ground Bond Tester, CE Listed Our 446 model is a 4-in-1 tester with AC Hipot, DC Hipot, Insulation Resistance, and Ground Bond capabilities. This tester features ...

See the other products
SCI
DVS 2929 tester
DVS 2929 tester
MRP 29 HY

The surface quality and the efficiency in surface conditions of sheet Micro Ohmmeter metal / plates can measure with the resistance measurement system MRP29HY. The MRP29HY consists of a micro-ohmmeter and a hydraulic press, the engineering ...

See the other products
SCHUETZ
resistance measuring device
resistance measuring device
MAT 2000 T

The MAT2000T is used to determine the electrical cable resistance per 1000 m (US model per 1000 ft) of high- and mid- range power cables without cutting the cable. Using the 4 pole measuring technique according to Kelvin, all feed line ...

See the other products
SCHUETZ
resistance measuring device
resistance measuring device
MAT 1000

The MAT1000 resistance measurement holding device is used for the measurement of the electric resistance of samples of cables, wires or other material during the inspection of incoming goods, manufacturing control applications and quality ...

See the other products
SCHUETZ
diameter measuring system
diameter measuring system
iXRAY

The iXRAY solves almost all measuring, automation and documentation tasks for single and multi-layer pipes and hoses. Thanks to a precise spatial resolution and repeatabilities in the µm range, the system reliably generates exact measurement ...

See the other products
iNOEX GmbH
thickness measuring system
thickness measuring system
WARP CP

The WARP CP is an inline measuring system with radar-based wall thickness sensors for detecting the various structures of a corrugated pipe. Outer and inner diameters, as well as the wall thicknesses of the bell, crest, liner, and valley ...

See the other products
iNOEX GmbH
thickness measuring system
thickness measuring system
WARP 100

WARP 100 is an inline pipe measuring system for wall thickness and diameter measurement at up to 38 measuring points and 19 axes. More than 1100 measurements per second guarantee a gapless measurement. This is particularly important for ...

See the other products
iNOEX GmbH
1-axis scanner
1-axis scanner
Orthopac FMC-15

The Orthopac FMC EP is a compact bridge only with optical scanning system. It fits in easily even under tight space conditions and can control external weft straighteners. BOW AND SKEW DETECTION AND CONTROL The Orthopac FMC automatic ...

basis weight measurement system
basis weight measurement system
Gravimat DFI

Beta Sensor Gravimat FMI/DFI Measurement of basis weight (mass per unit area) / thickness /density The beta sensor measures grammage and material thickness by means of isotope rays The sensor can be used in the Qualiscan QMS-12 web ...

level measurement system
level measurement system
TORRIX

FAFNIR have a level measurement solution for all tanks on a petrol station, underground and aboveground If you need a solution for an Ad blue tank, fresh or used motor oil tank, LPG or LNG plus multiple other liquid storage tanks, ...

force measurement stand
force measurement stand
max. 2500 N | TEX 555

Andilog's TEX 555 is a manual test stand which is generally utilized for applications which involve minimal-to-moderate force testing applications, when immediate results are needed. This device was especially designed for tests on springs, ...

vibration testing system
vibration testing system
ES-6

ISTA 3A 6A Amazon Vibration Test Bench can complete sinusoidal vibration test and broadband random vibration test respectively, and can complete classic (half sinusoid, trapezoid, back peak saw tooth) pulse and shock response spectrum ...

See the other products
AI SI LI (China) Test Equipment Co., Ltd
electrodynamic shaker
electrodynamic shaker
ES series

Electrodynamic Vibration Shaker Application: We are manufacturer of High Frequency Vibration Test Machine series products, adopted the 'double-magnetic circuit structure',' self-generated skeleton action circles', 'Airborne Support’ ...

See the other products
AI SI LI (China) Test Equipment Co., Ltd
electric test equipment
electric test equipment
ES-10

Vertical Vibration Vibration Testing System for Electrical Accessories is perfect for the vibration testing for the household goods, electronic products, car parts, and so on. high frequency vibration tester can meet the testing ...

See the other products
AI SI LI (China) Test Equipment Co., Ltd
vertical measuring projector
vertical measuring projector
CST-50

CST-50 impact specimen gap projector, based on the practical requirement of the domestic customers and according to the demand of impact specimen gap in GB/T229-2007 ,it is the special equipment which checks the Charpy V-type and U-type ...

See the other products
Jinan Liangong Testing Technology Co., Ltd
motorized pendulum impact tester
motorized pendulum impact tester
JBDS-C series

Ultralow-temperature Automatic Impact Testing Machine Ultralow-temperature automatic impact testing machines includes digital display ultralow-temperature automatic impact testing machine and computer control ultralow-temperature automatic ...

See the other products
Jinan Liangong Testing Technology Co., Ltd
motorized pendulum impact tester
motorized pendulum impact tester
JBS-Z series

Room-temperature Automatic Impact Testing Machine The host of this machine adopts casting steel material, which can make the equipment run steadily in the whole process after aging treatment and get more accurate results.The host is ...

See the other products
Jinan Liangong Testing Technology Co., Ltd
position measuring system
position measuring system
TA

The Velmex "TA" system is specifically designed for the researcher to perform non-contact measurement analysis. Since it's introduction, the Velmex "TA" system has been the standard of North America's Dendrological Research Community. ...

automatic melt flow indexer
automatic melt flow indexer
XNR-400D

The Melt Flow Indexer is designed according to ISO1133, ASTM D1238 and ASTM D3364. It is suitable for determining the MVR and MFR of thermoplastic. Not only can which has low melt temperature. It has been widely used in testing the ...

See the other products
Laryee technology co.,ltd
falling weight impact tester
falling weight impact tester
FIT12300

This machine is widely used for the testing of impact strength test of plastic pipe materials and pipe components, and also suitable for the external loads impact strength test of plastic board, glass fiber reinforced plastic and kinds ...

See the other products
Laryee technology co.,ltd
Charpy testing pendulum impact tester
Charpy testing pendulum impact tester
CMT23XX

Charpy (simple-beam) impact testing machine is used for determining the impact capability of ferrous metal materials with high toughness, especially for steel and iron material and their alloy.This computer indicating model can be operated ...

See the other products
Laryee technology co.,ltd
hydraulic pressure comparator
hydraulic pressure comparator
CEH series

Delivery details : a manual are provided in English and French with the device + data sheet + Certificate + 0.5 liter of demineralized water Maintenance : Our technical service department is at your disposition for the revision, calibration ...

See the other products
AREMECA
hydraulic pressure comparator
hydraulic pressure comparator
C series

- Addition of a reservoir pump (Ref. OP0158) - Adaptation of corrosives fluids such as skydroll, brake fluid, etc. - Kit to modify the comparison test pump into dead weight tester (CH2 -> BH2) - Contact us ! ADDITIONAL INFORMATIONS ...

See the other products
AREMECA
hydraulic pressure comparator
hydraulic pressure comparator
CH3-10000B

Delivery details : a manual are provided in English and French with the device + data sheet + Certificate + 0.5 liter of mineral Oil Maintenance : Our technical service department is at your disposition for the revision, or after sales ...

See the other products
AREMECA
dissolution tester
dissolution tester
DT light series

The ERWEKA DT light Series delivers the proven ERWEKA quality in a comprehensive package for a budget for simple dissolution testing with USP method 1, 2, 5 and 6. The DTs are equipped with 6 or 8 test stations and a fixed drive head ...

See the other products
ERWEKA
dissolution tester
dissolution tester
DT 950 Series

The ERWEKA DT 950 Series is our first digital dissolution tester on the market, equipped with the most advanced technology for the requirements of today and the challenges of tomorrow. With state-of-the-art embedded PC technology, ...

See the other products
ERWEKA
dissolution tester
dissolution tester
BioDis RRT 10

With the ERWEKA RRT 10, automatic dissolution testing of different extended and sustained release dosage forms has become easier than ever before. This unit is perfectly suited for simulating the pH-changes within the human body. By placing ...

See the other products
ERWEKA
power tester
power tester
APL000032

Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive sophisticated ...

high-voltage tester
high-voltage tester
HVA28 & HVA28TD

The HVA28 and HVA28TD are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA28TD device includes integrated Tan Delta diagnostics capabilities, in comparison to HVA28 device, which can ...

See the other products
b2 electronics GmbH
high-voltage tester
high-voltage tester
HVA68TD

THE NEW MEMBER OF OUR SMARTVLF® SERIES The HVA68TD is a truly compact and portable VLF test set that determines the condition of medium voltage cables with a voltage rating up to 46 kV (acc. to IEEE 400.2-2013). It performs VLF and ...

See the other products
b2 electronics GmbH
high-voltage tester
high-voltage tester
HVA34-1 & HVA34TD-1

The HVA34-1 and HVA34TD-1 are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA34TD-1 device includes integrated Tan Delta diagnostics capabilities and features TD leakage current correction ...

See the other products
b2 electronics GmbH
surface roughness tester
surface roughness tester
ART-300

l Mechatronics and ergonomics design, small size, light weight, easy to operation l The stylus drive unit can be stored within the main unit for standard measurement, or separated from the display unit by using the supplied cable which ...

See the other products
Beijing Cap High Technology Co.,Ltd.
temperature measuring device
temperature measuring device
TR608H-B1-A

Product description: 8’’ binocular temperature-measuring face recognition terminal •Adopt off-line face recognition technology to recognize multiple races such as Asian, Caucasian and Black •Support functions such as face recognition ...

See the other products
Beijing Cap High Technology Co.,Ltd.
conductivity tester
conductivity tester
Sigma 2008B

MEASURING RANGE:0.51 %IACS ~ 112 %IACS, or 0.3 MS/m ~ 65 MS/m LIFT-OFF: 500μm PROBES: φ14mm Freq of 60 KHz and φ8mm freq of 500 KHz each one RESOLUTION0.1~0.001%IACS Digital Conductivity Tester Sigma 2008B Working Freq. ...

See the other products
Beijing Cap High Technology Co.,Ltd.
leakage tester
leakage tester

To check the tightness of the cylinders Pressurization of the volume to be controlled and measurement of the pressure loss induced by the leakage rate. This loss of load is expressed in percent, zero being the perfect tightness. Entrance: ...

color measuring system
color measuring system
TPI21-TH

The photometric specifications of LEDs must meet very high tolerance requirements regardless of whether they are to be used in general, automotive or other specialist lighting applications. This is often a problem since the manufacturing ...

See the other products
Gigahertz Optik GmbH
test system
test system
TFCT25

Lateral light-emitting light guides are now widely used in the automotive industry for daytime running lights, tail lights and brake lights. Their aesthetic design and 3D shape are significant recognition factors. They are made of plastic ...

See the other products
Gigahertz Optik GmbH
light measurement goniometer
light measurement goniometer
GB-GD-360-RB40-2-BTS256-LED

Measurement of the luminous intensity distribution Luminous intensity distribution is used to specify the directional radiation characteristics of lamps. It is determined by numerous separate measurements of the luminous intensity. ...

See the other products
Gigahertz Optik GmbH
diameter measuring device
diameter measuring device
LS series

High-quality laser technology LS Series systems utilise high-precision laser technology for no-contact, non-destructive measurement – the LS Series systems are perfect for quality, stability and diameter control during production ...

speed measuring device
speed measuring device
VL

Non-contact measurement of speed, length and position without scale or point of reference Compatible with multiple materials, surfaces and colours Very high accuracy and repeatability Class 1 laser scanning system Robust design ...

thickness tester
thickness tester
kaloMAX NT II

•Reproducible measurement of wear and scratching restistance •Fast and easy measurement of layer thickness •Comfortable operation •Suitable for hard material films, lacquers, plastic coatings etc. •For quality assurance and coating ...

See the other products
BAQ GmbH
Rockwell hardness test reference block
Rockwell hardness test reference block

The Rockwell hardness test blocks are used for the yearly, indirect verification and calibration of Rockwell hardness tester as well as the cyclic (daily) check of the hardness tester. The hardness test blocks Made in UK are delivered ...

See the other products
BAQ GmbH
Brinell hardness test reference block
Brinell hardness test reference block

The Brinell hardness test blocks are used for the yearly, indirect verification and calibration of Brinell hardness tester as well as the cyclic (daily) check of the hardness tester. The hardness test blocks Made in UK are delivered ...

See the other products
BAQ GmbH
Rockwell hardness test reference block
Rockwell hardness test reference block

We provide huge field quality hardness blocks, where all blocks are of great excellence, perfect scale and reflecting surface.

See the other products
Beijing United Test Co., Ltd.
Brinell hardness test reference block
Brinell hardness test reference block

Beijing United Test Co., Ltd. provides reference block for Rockwell hardness test. The hardness blocks are of good quality, provides satisfactory level of precision, and mirror-polished surface. The hardness blocks have a variety of hardness ...

See the other products
Beijing United Test Co., Ltd.
micro Vickers hardness test reference block
micro Vickers hardness test reference block

We provide standard hardness blocks, which have mirror polished surfaces. All our products are of high quality and abide to the standard accuracy scale.

See the other products
Beijing United Test Co., Ltd.
ultrasonic cavitation meter
ultrasonic cavitation meter
OPCAV

OPCAV is a portable ultrasonic cavitation meter. Is was designed to measure two ranges of band of the probe signal: • band 20kHz – 50kHz for sonication signal level; • band 400kHz – 1.2MHz for cavitation level. Broadbands allow ...

XYZ scanning system
XYZ scanning system
opScanner

Our scanners are controlled by our software to make the scan that covers the inspection area and to acquires the scan data, required in the customer application. Take advantage of one of our standard scanning solutions, or have us customize ...

ultrasonic cavitation meter
ultrasonic cavitation meter

OPCAV is a portable ultrasonic cavitation meter. Is was designed to measure two ranges of band of the probe signal: • band 20kHz – 50kHz for sonication signal level; • band 400kHz – 1.2MHz for cavitation level. Broadbands allow for ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us