- Metrology - Laboratory >
- Optical Component >
- Other optical components
Other optical components

Rectangular cell made of optical glass for precise transmittance measurement of transparent liquids. The optical path is 10 mm and recommended for liquids with normal optical density.

Thermo Scientific™ PXS10 - 130kV Microfocus X-Ray Sources combine powerful geometric magnification with a highly stable, high intensity output to meet the most demanding industrial imaging and inspection challenges. With the ability to ...
Thermo Fisher Scientific

Thermo Scientific™ PXS5 Microfocus X-Ray Sources provide an economic, high-performance solution for manual and automated inspection and testing, combining microfocus spot size with high stability and limited energy/power. Available with ...
Thermo Fisher Scientific

The Thermo Scientific PXS11 – 75kV Microfocus X-Ray Source is an affordable solution for intermittent use in industrial, healthcare and laboratory applications, combining a stable, low energy output and moderate resolution. With a round ...
Thermo Fisher Scientific

The DSE04XX Series is the decoded versions of the DE2011-DL ultracompact high performance 2D imager engine. It is comprised of the DE2011-DL and a decoder board. The scan engines feature an exceptional high-speed sensor which enables ...

Series A Dimension 18 x 130 x 140 mm Active window (PL x AL) 80 × 80 mm Interface PNP dynamic normally open (NO) Principle of operation Optical window sensor Principle of optical operation Through-beam sensor Beam characteristic Divergent Light ...
Balluff GmbH

Series A Dimension 18 x 90 x 140 mm Active window (PL x AL) 40 × 80 mm Interface PNP dynamic normally open (NO) Principle of operation Optical window sensor Principle of optical operation Through-beam sensor Beam characteristic Divergent Light ...
Balluff GmbH

Series A Dimension 18 x 210 x 220 mm Active window (PL x AL) 160 × 160 mm Interface NPN dynamic normally open (NO) Principle of operation Optical window sensor Principle of optical operation Through-beam sensor Beam characteristic Divergent Light ...
Balluff GmbH

Renishaw supplied plane mirrors are manufactured on a low thermal expansion glass substrate and have a hard oxide, dielectric coating. Features and benefits Thermally stable - manufactured on a low thermal expansion substrate ...
RENISHAW

The photosensor consists of 6-chip photodiodes produced in planar technology. The photodiodes are passivated with silicon-nitride which acts as an antireflective layer. They are then bonded to the PCB and protected with transparent epoxy ...
RENISHAW

The photosensor consists of 6-chip photodiodes produced in planar technology. The photodiodes are passivated with silicon-nitride which acts as an antireflective layer. They are then bonded to the PCB and protected with transparent epoxy ...
RENISHAW

The all-in-one laser scanner – Combining speed, accuracy, flexibility and intuitiveness The Hexagon HP-L-10.10 isn’t just a market-leading scanning solution for CMMs. It’s the one laser scanner that turns your CMM into an optical multisensor ...

A compact, accurate and affordable fixed-line blue laser scanning sensor The HP-L-5.8 makes it easy and affordable to add the speed and measurement coverage of laser scanning to new and existing CMMs. Like other HP-L laser scanners, ...

SURFACE TREATMENT FOR OPTICAL APPLICATIONS HEF has developed a thin multilayer PVD treatment, useful for optical coatings (reflectors, anti-reflective solutions) and offers a wide range of solutions. It's a range of thin films used ...

The optocoupler Opto2-01 is applied for an effective protection of signal lines of e.g. PLC control systems against overvoltages and interferences. This is achieved through the galvanic isolation of the signals at the integrated optocouplers. These ...

The optocoupler Opto1-03 is applied for an effective protection of signal lines of e.g. PLC control systems against overvoltages and interferences. This is achieved through the galvanic isolation of the signals at the integrated optocouplers. These ...

Allows the rear valve position to be observed from the operator’s side.

3D inspection with Laser scanner and measuring arm The Trimos ScanSurf80 laser scanner, the ultimate solution for scanning measurements and reverse engineering. This high-performance laser scanner provides very high measurement ...

521 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 6 kVDC, CTR min. 0.5, cutoff 50 kHZ. Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest ...
StandexMeder Electronics GmbH

Miniature 522 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4 kVDC, CTR min. 0.5, cutoff 85kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance ...
StandexMeder Electronics GmbH

525 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4 kVDC, CTR min. 0.5, cutoff 50 kHZ, ATEX & IECEx Certified (18 ATEX 0017 U, KIWA 18.009 U). Insulation resistance input /output ...
StandexMeder Electronics GmbH

Portable X-Ray System from 2,5 to 9 MeV Portable Betatron systems are a range of compact circular electron accelerators producing a high energy directional X-Ray beam. The Betatron systems are easy to assemble, operate and maintain. ...

Lithium-niobate straight waveguide phase modulator is fabricated by titanium diffusion or proton exchange process, which has the characteristics of low insertion loss and low driving voltage. The product has passed GR-1221-CORE reliability ...

The multi-functional integrated optical device is made by lithium niobate annealing-proton exchange process, and has the functions of light splitting, phase modulation, polarizing, etc. It is mainly applicable to fiber optic gyroscopes, ...

K107USB is an interface that allows for the implementation of asynchronous RS485 serial communication using a USB port on a PC. With the provided driver, the serial interface is treated by the operating system as a standard system ...

Beam Splitters - polarized and unpolarized Plates and Cubes

Transparent glass window, diameter 65 mm with 3 mm. Spare parts for water cooled and air cooled camera housing.

Metallic glass window anti-glare, diameter 65 mm with 3 mm. Spare parts for AIRTEC and ACQUATEC camera housing.

Protective glass made of quartz resistant to high temperature. Diam. 65mm, th. 2.2mm. For ACQUATEC housing series.

Barium Sulfate (BaSO4) is a white powder used in optical applications due to its relatively flat spectral reflectance response within the UV-A to NIR wavelength range. In solution Barium Sulfate exhibits a diffuse reflectance characteristic ...

The CMX971 is a high performance quadrature modulator featuring a wide operating frequency range and attractive power consumption. Control of the CMX971 can be by serial bus or by direct control (with reduced functionality). The ...

First utilized in mobile devices, Time of Flight (ToF) sensing is expanding its applications to automotive and industrial device markets. As the market expands, requirements about the emitter, the light source, are diversifying. To ...

•for use with SYS 90 •for optics with ø 76.2 mm (3") •installation on slide RT 90 or on pin CHARACTERISTICS •for use with SYS 90 •deformation-resistant aluminium •reflection-poor, black anodized •for optics with ø 76.2 mm (3") ways ...
OWIS GmbH

The High Speed Steerable Mirror (HSSM) attached to the DataMan 470 fixed-mount barcode reader provides a high-performance, cost-effective solution for large field of view applications. Previously, pallet scanning, aggregation, and large ...

CEDRAT TECHNOLOGIES (CTEC) offers a wide range of both Fast Steering platform and mirror solutions, available Commercially of the Shelves (COTS) from lab to filed and Space qualified products. A Fast Steering Mirror (FSM) solution ...
CEDRAT TECHNOLOGIES

The TQC Telescopic Inspection Mirror with high quality chrome shaft is originally manufactured for inspection of aircraft's. These inspection mirrors are perfect for inspection of the invisible, hard to reach, behind view spots and are ...

The NC5000A Series AWGN noise sources feature outstanding stability, switching speed, and ripple-free response over standard waveguide bands. The high stability of the NC5000A Series allows these units to be used in place of cumbersome ...

Efficient and highly productive scanner welding Today, scanner welding enables highly accurate and economical remote processing in series production. With the help of mirrors, the laser beam is positioned within a processing field ...
Your suggestions for improvement:
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining