Other optical components

The mirrors are available in a range of shapes and sizes, have high reflectivity for broad spectral range and are low polarizing (10000:1) properties enhancing contrast while minimizing glare, and are made in accordance with customers’ ...

Optical windows & stage glass are optical glass with polished faces that are relatively parallel and are typically used as a protective element between two environments. They can be supplied uncoated or with an anti-reflection coating ...

The beamsplitter function is to split an optical path into two or more paths by percentage control of overall intensity. Vision Engineering provides plate or cube, pellicle, polka dot or speciality prism beam splitters, in a wide range ...

Nikon Metrology X-ray sources are at the heart of our technology and have been designed and manufactured in-house from 1987 to this day; offering over 25 years of knowledge. Being at the heart of the image, control over the X-ray source ...

The series of parallel beams of light in the Balluff Optical Window sensor allows the device to sense a particular object at a point within an area (window). This special optic design provides stellar resolution that maintains reliability ...

Supervision and synchronisation: We provide a range of accessories for laser supervision and synchronization applications such as the delay or burst generators, pockets cell drivers…. • Supervision software: Control of all system ...

In order to eliminate the interference of the reflected light from the back surface, the large-sized beamsplitter plates will generally be made into a wedge form with a small angle. The reflected light from the rear surface deviates from ...

The high power broadband mirrors cover ultraviolet, visible and nearinfrared wavelengths with excellent optical performance, stable reflectivity and high damage threshold. •Material: Borofloat •Diameter ...

Multi-order waveplates are made of high quality quartz crystals, providing delays of half and quarter wavelengths at various commonly used wavelengths. λ/2 waveplates are usually used to rotate the polarization of light, while λ/4 waveplates ...

- Ideally suited for monitoring ejection - Active zone 40, 80 or 120 mm - Dynamic evaluation - Adjustable output signal duration 10 … 300 ms

Wavelength: 550 nm - 1,500 nm

The polarizer used in visible infrared. Wavelength range 600 – 1200 nm transmission >67 – 84% contrast 50 db Wavelength range 550 – 1500 nm transmission >57 – 85% contrast 40 db Thickness ...

Wavelength: 357 nm - 403 nm

The polarizer for applications in the ultraviolet spectral range Wavelength range 362 - 392 nm transmission > 40 - 47 % contrast 50 db Wavelength range 360 - 397 nm transmission > 40 ...

Wavelength: 372 nm - 392 nm

The polarizer for applications in the ultraviolet spectral range Wavelength range 372 - 388 nm transmission > 52 - 57 % contrast 50 db Wavelength range 360 - 390 nm transmission > 52 - 58 % contrast 40 db Wavelength range 365 - ...

When connecting a multi-furcated fiber to a spectrometer or light source, light entering/exiting each of the fiber legs may or may not be uniform, so a fiber-optic homogenizer can be used to mix the signals to provide more uniform signal. The ...

The CUV-UV/VIS, CUV-FL-UV/VIS and CUV-ALL/UV/VIS are especially designed for absorption and fluorescence measurements and should be used with standard 10×10 mm cuvettes. For non-standard cuvettes, adjustable ball-detents ensure repeatable ...

When an in-line filter is needed, Avantes offers two types of in-line filter holders: the FH-INLINE-1” and the FH-INLINE. The FH-INLINE-1” is designed to hold one inch filters from 1-60 mm thick. The FH-INLINE is designed for 1/2” or ...

STT-25.4 The STT-25.4 is suitable for 1 inch mirrors or optical components. The motorized mirror mount STT-25.4 can be seen as the motorized counterpart of a classical kinematic mount for mirrors, lenses or other optical components. ...

STT-12.7 The STT-12.7 is the smallest of the available motorized mirror mounts. It is perfectly suited to precisely position a 0.5 inch mirror or other optical components. The motorized mirror mounts can be seen as the motorized counterparts ...

STT-50.8 The STT-50.8 accepts 2 inch mirrors, lenses or other optical components. The motorized mirror mount STT-50.8 can be seen as the motorized counterpart of classical kinematic mounts for mirrors, lenses or other optical components. ...

Product description CI F06 unit includes a digital pulse expander and the matched digital pulse compressor housed in a single unit. The pulse expander generates a frequency coded pulse, also called a chirp. Pulse output is IF analog. The ...

Product description CI F07 unit includes two digital pulse expander channels housed in a single unit. The pulse expander generates a frequency coded pulse, also called a chirp. Pulse output is IF analog. CI F07 may be customized by ...

Product Description CI E03 is a digital dual pulse compression module, well suited for RADARS performance enhancement. Analog inputs and outputs make it an ideal replacement for SAW based pulse compression subsystems. Each of the two ...

The SP deflection mirrors make it possible to create perimeter protection of areas with access points on multiple sides, with a considerable reduction of costs. This solution eliminates the need to use more than one safety light curtain.

Workhorse Lab Accessory for 1 cm Pathlength CuvettesThe CUV-UV cuvette holder for 1-cm pathlength cuvettes couples via optical fibers to Ocean Optics spectrometers and light sources to create small-footprint systems for absolute absorbance ...

Integrated Sampling Systems for USB2000+ and USB4000 spectrometersUSB-ISS series integrated cuvette holder-light source accessories for USB2000+ and USB4000 spectrometers accommodate 1 cm pathlength cuvettes and are ideal for creating ...

Take Dark Measurements without Disturbing Spectrometer SetupsThe INLINE-TTL-S is an electronic shutter for use in Ocean Optics spectrometer setups. The shutter assembly installs between two collimating lenses and allows you to block the ...

Optical Windows Extreme precision optical windows, customized to your specification Optical Window made of Fused Silica Fused Silica Optical Window “ For the past 10 years, Zygo has been the supplier of choice to Thales UK's optronics ...

Zygo Optical Systems Division manufactures reference mirrors to exacting standards. Our large polishing machines, (from 48" to 196" in diameter), allow ZYGO to make reference mirrors using low expansion materials including Fused Silica ...

Reference Mirrors Key Features • Geometry (flats, spheres, aspheres) to better than λ/50 PV. • Surface Roughness < 1 nm rms. • Full aperture interferometry up to 32" for flats, and up to 12" for spheres/aspheres (larger with stitching). Zygo ...

Description: A fiber-optic splitter is based on a quartz substrate of an integrated waveguide optical power distribution device. Product Feature: 1. Low insertion loss, Low Insertion Loss, Low PDL VS High Return Loss 2. Telcordia ...

Description: A fiber-optic splitter is based on a quartz substrate of an integrated waveguide optical power distribution device. Product Feature: 1. Low insertion loss, Low Insertion Loss, Low PDL VS High Return Loss 2. Telcordia ...

Description: A fiber-optic splitter is based on a quartz substrate of an integrated waveguide optical power distribution device. Product Feature: 1. Low insertion loss, Low Insertion Loss, Low PDL VS High Return Loss 2. Telcordia ...

Laser and Galvo Controller Board for 2D and 3D Laser Marking and Other Applications with Galvo DLC2 series is the new generation of laser controller developed by JCZ, which works with EZCAD3 software. It can control most of the fiber ...

Short Description: 16 bits X Y axis digital laser galvanometer is with high precision, high speed and low cost, widely used on various types of laser equipment with galvo like laser marking, welding, cutting, engraving, etching... High ...

*High Rate: Scanning speed > 10000mm / S *Hyper fine: Repeatability < 2um *Stable: Long time temperature drift < 5urad *Uniformity: Spot diameter error within the processing range< 19%

XXS is a mini motor, without housing, 5-7mm aperture, apply to medical treatment, OCT, Micto. Small dimension, higher speed.

Quantum™ - Digital 2D galvanometer system - Interface: XY2-100 - Aperture: 10mm,12mm,14mm,20mm,30mm,50mm - Wavelength:1064nm,10.6μm,355nm,532nm - Low offset., low gain drift - More stable control system - Higher speed than Atom - ...

Including the galvanometer, dynamic focusing unit, controller, software. XY2-100 universal digital interface. Customization according to application. Provide 1064nm, 10.6um, 355nm, 532nm, such as a variety of wavelength ...

CTI 6220,6230 galvo,low temperature drift 8100/6800 driver, temperature drift＜0.1mrad Standard 1/4λ SI mirror, SIC, Be, Fused silica for optional, The conventional wavelengths are 1064, 355, 532nm, other wavelengths can be customized. Speed ...

CTI 6220,6230 galvo,low temperature drift 8100/6800 driver, temperature drift＜0.1mrad Standard 1/4λ SI mirror, SIC, Be, Fused silica for optional, The conventional wavelengths are 1064, 355, 532nm, other wavelengths can be customized. Precision ...

Description • XY2-100 protocol (SL2 customized protocal for selection) • Integrated structural design, high thermal stability, high dustproof and water-proof grade (IP65) •Standard lens ≤λ/4@633nm, high focal spot consistency under ...

10Gbps Φ40μm Top-illuminated APD Chip Introduction This 10Gbps Avalanche Photodiode Chip (APD Chip) is a kind of Ground-Signal-Ground (GSG) electrode structure, with top-illuminated active area of Φ40μm. This product features is High ...

Introduction This 25Gbps 1X4 Array (100Gbps) photodiode chip, which is top-illuminated high data rate PIN photodiode chip, active area is Φ20μm. Its features have high responsivity (Typ. 1310nm: 0.8A/W), low capacitance (Typ.: 0.08pF,@-5V), ...

100Gbps Φ20μm 750μm Pitch 4X25G Array Digital PIN PD Chip Introduction This 25Gbps is 1X4 Array (100Gbps) photodiode chip, which is top-illuminated high data rate PIN photodiode chip, with active area of Φ20μm. Its features have high ...

The TM Icefree Traffic Mirror increases safety on roads and company premises. The combination of the INOX mirror surface and the special cushions used on the back allows the mirrors to be used even in the cold season. This design ...

The TM-I traffic mirror increases traffic safety on roads, industrial premises, underground parking lots, shopping centres and private roads. The mirror is available in two different materials: acrylic (70 % more impact resistant than ...

The economical UNI-SIG Mirror helps to increase the safety on roads, industrial sites, underground parkings, stores and private driveways. Due to the reflex foil on the mirror plate that increases the visibility, the risk of accidents ...

Beamsplitter coatings split the incident energy, transmitting a portion and reflecting another portion. We offer both energy beamsplitting products and dichroic (spectrum) beamsplitting products from 400 to 2000 nm with two different ...

A birefringent wedge divides a light beam into two orthogonally polarized beams. The polarization with the larger refractive index is deviated by a larger angle. Figure 1 shows an YVO4 birefringent wedge splitting a light beam into two ...

with a variety of anti-reflection (AR) coating options that vastly improve the efficiency of the optic by increasing transmission, enhancing contrast, and eliminating ghost images. Most AR coatings are also very durable, with resistance ...

Characteristics : * Use from 0.4 µm to 13 µm * UV sensitivity : none * Optical component quality : Paralllelisme : < 3 µm Flatness : 5(2) Surface condition : P4 (S/D : 20/40) One face with AR coating * Use ...

The range of HVIR expands with a new window in order to adapt to the hardest conditions. H.VIR 85 TYPE 21C and H.VIR 105 TYPE 22C fitted with Germanium crystal with DLC (HARD CARBONE) coating on external face and AR (ANTI-REFLECTING) ...

Interface window for equipment of infrared thermography measurement Temperature of use : 10 à 200°C Pressure behaviour : 1 to 5 bars maxi according to the crystal used For use from 0.3 to 14 μm according to the crystal ...

Ge window Applicable to infrared imaging, monitoring, infrared inspection, telemetry and infrared spectroscopic optical system.

Si window Applicable to infrared imaging, monitoring, infrared inspection, telemetry and infrared spectroscopic optical system.

Baf2 window Applicable to infrared imaging, monitoring, infrared inspection, telemetry and infrared spectroscopic optical system.

Barium Sulfate (BaSO4) is a white powder used in optical applications due to its relatively flat spectral reflectance response within the UV-A to NIR wavelength range. In solution Barium Sulfate exhibits a diffuse reflectance characteristic ...

The igm laser sensor iLS-C is useful for applications when edges or gaps must be searched for. The sensor is conceived to detect deviations between the actual work piece position and its original position. Shifting is computed in parallel ...

The reflector R by Delta is mirror designed for light curtains which reflects a luminous ray back to its source where it came from. With these function, it enables the product to create an optical barrier having a V3 or V5. Also, delta ...