... Plastic Bridging Chock 1000V • Oval shape without sharp edges • With wide groove for all common cable cutters ...
... Plastic Bridging Chock 1000V • Oval shape without sharp edges • Without groove • Long design with large impact head ...
... Plastic Bridging Chock 1000V • Oval shape without sharp edges • Specially designed for the assembly of branch clamping rings • With hook • With wide groove for all common cable cutters ...
The TPS 2U Chassis (BJ9900002) is a standard 19-inch rack-mount power supply chassis for industrial use, suitable for servers, telecom systems and data centers. It features corrosion-resistant construction, configurable surface treatments and straightforward ...
TPS Elektronik GmbH
... Overview
The TPS 4U Chassis (Manufacturer code BJ9900004, Article number RA1079) is a 4U, 19-inch rack-mount server/industrial enclosure designed for versatile installation in server rooms, data centers and industrial racks. It features a multi-material ...
TPS Elektronik GmbH
... Overview
The TPS 3U Chassis (Manufacturer Code: BJ9900003, Article Number: RA1078) is a 3U, 19-inch rack-mount enclosure designed for server, data center and industrial electronics applications. It provides a configurable multi-material ...
TPS Elektronik GmbH
... Overview
- Grade 70 twin clevis links for chain assemblies and transport/rigging connections
- Forged alloy steel (Grade 70)
- Red powder coat finish for identification and corrosion resistance
- Embossed "Grade 70" identification
... Product Name
Grade 80 Weld-on Ring
Introduction
The Grade 80 Weld-on Ring provides a permanent lifting point when welded to structural steel. Designed for industrial lifting and rigging applications, it is made from high-strength ...
... Description
Device for towed loads. The towing shackle enables pulling containers, roll containers and trolleys previously fitted with a drawbar. It is used as a towing accessory on certain utility vehicles in the Cobrane range.
Compatible ...
... We have three types of AE chassis, 4-channel, 20-channel and 48-channel resepctively. The chassis can be cascaded into larger systems up to more than 100 channels which can meet most requirements of industrial applications and laboratory researches. Features： • ...
... Overview
Magnetic hold-downs for acoustic emission (AE) sensors, designed to secure sensors to ferromagnetic test surfaces. Units consist of a permanent magnet and a protective shell. M series are standard-temperature hold-downs; H series are ...
... General
These aluminum backing plates attach to polishing tools. Each backing pad includes a snail lock adapter that locks by a simple twisting motion. To change pads, untwist to remove the pad and fit the next abrasive.
Features
- Aluminum
... General
These aluminum backer plates attach to polishing tools and feature a snail lock adapter that engages with a simple twist-and-lock motion. Pads are removed by untwisting the adapter, allowing quick replacement with the next grit.
Features
- Aluminum
... General
The Aardwolf Wedge Spacer is a safety positioning tool that creates a controlled gap between slabs to allow safe insertion of slab clamps and reduce operator exposure to the fall shadow zone during handling operations.
Applications ...
... These stands are designed for holding dial gauges. They do of course have many other applications; for example as end stops or for holding templates. ...
Stands can be supplied without arm, only the magnetic base.
... This device is used to help set the cutting tool accurately on a line boring machine. It has a magnetic base that attaches to the boring bar, and a dial indicator mounted on a bracket. The wide tip of the indicator touches the tool or tool holder. As ...
accessory for wall mounting signaling tower light.
... Product Overview
The stainless steel wall bracket is a robust and ergonomic solution designed for mounting cabinets and enclosures in environments where floor space is limited or needs to remain clear. It is particularly suitable for industrial ...
... The triaxial mounting bracket MTCR-S3 optimizes the integration of Rogowski coils: - Integration: allows central positioning of the conductor to ensure 0.5% accuracy. - Compliance: CE, RoHS, REACh. Compatibility: This accessory is compatible with Rogowski ...
... The MTCR-SV mounting bracket allows for the attachment of a Rogowski coil to a conductive bar and includes a voltage tap: - **Integration:** Optimizes the installation of a Rogowski coil by ensuring screw attachment to a conductive bar and voltage tapping. ...
... We supply some accessory parts for rectangular steel tubes beams. Customer need to buy tubes from steel supplies. Lifting Ring - Kits for 3” x 3” tube includes: 1 Main Lifting Ring P/N87121 4 Lifting Hanger P/N87141 Kits for 4” x 4” tube includes: 1 ...
... Simple 90 degree bevelled square rulers may be offered in any size, and are manufactured by the following specifications: • Rectification and whetstone honing on stainless steel measuring surfaces; • Honing of control edge. • Simple 90 degree square ...
... EXPANDED POLYETHYLENE L-SHAPED, U-SHAPED, THREE-WAY, MULTISHAPE PROTECTIVE CORNERS EXPANDED POLYETHYLENE COILS, HD COUPLED and adhesive HIGH AND LOW DENSITY POLYETHYLENE COILS HD COUPLED EXPANDED POLYETHYLENE BAGS LOW DENSITY POLYETHYLENE ...
... We suggest to use carbide (hard metal) to produce details such as this in the picture. It can guarantee a significant increase in wear resistance. Dimensions and processing are agreed upon according to the customer’s specific needs. ...
... Wall mounting bracket for Ø12 and Ø18 probes, SS 316L. Dedicated to SIMEX ProSens line devices. ...
... Galvanized and brass eyelets. Head diameter 7/9 mm and type 051 Brass-plated eyelets with flat head, suitable for use with manual or automatic machines. The flat head will not cut into the material, an important consideration for working with soft and/or ...
... Heavy-duty metal buckles designed for use with plastic or woven straps. Available in the CB series, these buckles are ideal for securing straps with widths ranging from 9 mm to 40 mm. - Material: Steel wire - Compatible with plastic and woven straps - ...
The load tests have the primary objective to compare the experimental arrows obtained during the testing phase and the theoretical arrows of the project, in order to evaluate the deformation profile of the element tested. The test loads used can be distributed ...
... ACTIVESTONE spatter-resistant coating For cylindrical sensors Ø 8 mm/M8, Ø 12 mm/M12, Ø 18 mm/M18, Ø 30 mm/M30 Compact block-style protection Heavy duty all-steel construction ...
CONTRINEX
If enclosures are exposed to large temperature fluctuations, pressure compensation elements can be used. Pressure compensation elements prevent vacuum from being generated when the air inside the enclosure cools down. This would absorb the moisture through ...
... Product Details
Hanger assembly for the wide sensor Amp Litewire probe.
Characteristics / Technical Specifications
- Model: 7-016
- Compatible with: 8-016 Amp LiteWire
- Type: Sensor hanger assembly
- Application:
SENSORLINK
The fixing system by means of key is based on the friction principle: by means of pushing cones, a pressure between shaft and hub is generated, which allows to fix pulleys, gears, chain wheels, drums, flywheels, safely and securely.
... Depth stops for Bowers’ robust, easy to use SmartPlug range, designed to give the operator greater speed of use, unmatched measuring accuracy and superb repeatability, especially in harsh shop-floor environments. These depth stops are fully compatible ...
... Heavy-duty construction Easy installation For walls and outside corners Replaces unsightly and hazardous makeshift supports 1/2-inch, 3/4-inch, and 1-inch pipe mount Indoor and outdoor use Type 3R Features Federal Signal’s Models ...
FEDERAL SIGNAL
The Pipe Slider XL allows technicians to firmly fix one the of CPSERIES generators to a wide variety of pipes for all sort of NDT applications.
Teledyne ICM
The Opentrons Flex Deck riser is an adapter that you can place on the deck that raises the position of labware in that deck position. This riser can be utilized in combination with the Opentrons Tough Auto-sealing Lids to enable lid stacking.
Diameter: 150 mm - 500 mm
... Pipe ø 150 to 500 mm chain length: 1.650 mm Clamping device for pipes from 150 mm to 500 mm in diameter. The pipe clamping devices from BDS are suitable as standard for pipes with a diameter of 150 to 500 mm. Flexible and fast clamping is possible ...
Pair of side backplates for RACK mounting of LogiVox series voice evacuation control panels. The kit includes 8 galvanised 6 x 10 screws for securing the backplates to the panel, and 8 black 5 x 16 screws complete with M5 caged nut for mounting on the ...
... Goose - foot shaped earth termination made with 30 x 2 mm tinned copper tape (4 m + 3 extensions of 7 m each). The goose foot is a configuration recommended by lightning protection standards UNE 21186 and NF C 17-102 in order to obtain low inductance ...
Rubber elements specific and customized for flexible coupling (Balboni).
... Double trolley support – Material: Galvanized steel, plastic box – Weight: 0,69 kg – Characteristics: Used for two current collectors to have amperage of 50 A. ...
These shaft clamping elements consist of just two conical rings which require the minimum of radial space, so providing compact assemblies, and enabling use within small hub diameters. The design offers the maximum versatility of design, but does require ...
... PIX-PowerWare® Pulleys PIX has always been the innovators and pioneers in the mechanical power transmission and the related products. Innovations, up-gradation and providing value added products has always been the passion with PIX. To fulfill its commitment ...
... To be used with IBG FlexFit® fitting system and rigid PVC-U piping systems Only NEW IBG FlexFit® fittings with production date as of 03/2015 to be used d50 and d63 ...
Quicky is a compact precast dowel made from a single piece. Assembling and disassembling parts is not required. Quicky is injection-moulded from high-quality branded HDPE plastic and is therefore cheaper than metal-plastic sleeves. The threadless sleeve ...
CX Pressure Compensated Down Flow Guide recommended for use to maintain down speed within close limits when empty to full loading ratios of the elevator exceed 1:2.5. The CX is interchangeable with the standard fl ow guide and is selectable using the same ...
ERNI power taps in grids of 2.54 millimeters are developed especially for the power supply on the PCB and backplane. They are available in various designs with six or ten connection pins and as dip solder or pressfit variants. Depending on the cable connection ...
... material: premium chrome vanadium steel entirely hardened and tempered tip induction hardened surface finish: lacquered made according to standard DIN 6450 ...
... Rings, seamlessly rolled ZOLLERN offers rings with a unit weight of up to 250 kg and an outer diameter of 2,500 millimetres. Features and advantages: Very good kneading Near-net-shape surfaces Also suitable for smaller quantities Short delivery ...
... Cable Fastening and fan-out box Cable fastening with clamp Fiber cover running to end components Quick and easy to assemble Fastening of 6 to 12 protective tubes The plastic BEC-72/144-6T is a cable fastening and fan-out box with a capacity of ...