Flow: 0 m³/h - 140 m³/h
Pressure: 0.15 MPa - 0.6 MPa
Power: 4 kW - 185 kW
... Emulsification Pump Material: SS304 SS316L Motor Power:4-185kw Speed:1480/2800rpm Flow:0-4 to 0-140 T/h Emulsified pump - multi-stage emulsified pump, its working cavity consists of three-stage ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
Flow: 0.1 m³/h - 30 m³/h
Power: 5 W
Length: 85 mm
... Peristaltic pump with fixed flow configurable from 0.1 l/h to 30 l/h, ignition through external system, power supply 24 Vdc or 230 VAC. ...
Flow: 0 us gal/min - 500 us gal/min
Pressure: 0 psi - 150 psi
Length: 193 mm
... ◆ Positive Displacement ◆ 3 - Chamber Diaphragm Pump ◆ Permanent Magnet & Carbon Brush ◆ 10mm, 3/8” and 5/16” (8mm) Quick Connect ◆ Adjustable By-pass ◆ Santoprene & Polyamide Features Self-Priming Run Dry Without Damage Perform ...
AQ&Q Co., Ltd.
Flow: 300, 450, 502 l/min
Head: 7, 10 m
Power: 0.55, 0.75, 1.1 kW
... Ex submersion pump conveyor height 10 metres For use in biogas areas and other potentially explosive areas of Ex zones 1 and 2 • Housing and impeller of cast iron • Slip-ring seal of silicon carbide • Drive shaft of stainless steel ...
Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS OF USE - ...
Speroni
Flow: 0 m³/h - 144 m³/h
Pressure: 10 bar
Power: 2.2 kW - 11 kW
... are Monobloc electric pump units with standard EN 733 (ex DIN 24255) stainless steel pump AISI 304 and single pump-motor shaft. This range fulfils the hydraulic field included in the standard with the ...
Bombas Ideal
Flow: 4, 8, 16 m³/h
Pressure: 16, 21, 23 bar
Power: 0.37 kW - 18.5 kW
... series pumps are efficient operation, low noise, compact structure, light weight, easy to service, good seal performance etc. Its high head low-capacity performance range makes it especially suitable for use as a pressure ...
Flow: 0.7 m³/h - 180 m³/h
Pressure: 20 bar - 27.5 bar
Head: 0 m - 330 m
... Vertical Multistage Pumps, stainless steel casings and impellers, fitted with standard IEC motor, NEMA motors on request. Materials : SS304, SS316 Flange : DIN/ ANSI/ JIS (slip on type) Applications : Water Supply and Pressure ...
Euroflopumps International Pte Ltd
Flow: 0.0032 m³/h - 0.026 m³/h
... lubrication. The results are better pump performance and longer pump life. This diaphragm pump is simplex but is field-convertible to duplex, includes a 1/3 horsepower motor, and 316 stainless steel liquid ...
JAECO Fluid Systems
Flow: 15 m³/h
Head: 50 m
Power: 3 kW
Flow: 0.09 us gal/h - 3.43 us gal/h
Pressure: 232 psi
Power: 8 W - 22 W
... Neptune NSP-A Series Solenoid Metering Pumps are analog-controlled models that ensure precise pump settings using a keypad and graphical display. The NSP-A Series offers dosing head manual venting, external ...
Flow: 0 m³/h - 12 m³/h
Head: 90 m
Power: 1, 3 ch
... Our single pump booster sets increase and supply constant pressure for cold water installations where pressure provided by the mains supply or feed tank is insufficient. Example installations include; domestic properties, commercial buildings, ...
North Ridge Pumps Ltd
Flow: 54 m³/h - 324 m³/h
Head: 16 m - 35 m
Power: 2.2 kW - 22 kW
... Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids. Owing to their maneuverability they can be easily moved. ...
... submersible electric pump is designed according to the national standard of energy saving products, the type of pump by the QJ (R) submersible pump and YQS submersible motor of underwater integrated work, ...
Flow: 5.5 m³/h
Head: 7 m
Power: 300, 160 W
... integrated non-return valve puddle pump FSP 330 with ENS 1.1 fits into pipes with an inner diameter larger than 200 mm protection grade IP 68 – fully submersible Application portable pump for emergency ...
zehnder pumpen
Flow: 1,500 m³/h
Head: 35 m
Power: 250 kW
... can be added to the main pump body to help break and mix sludge, and improve the suction concentration of the slurry pump. 4. The submersible dredging pump is easy to install and operate without an additional ...
Relong Tech
Flow: 0 m³/h - 156 m³/h
Head: 0 m - 100 m
Power: 1.5 kW - 11 kW
... The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), Bronze LTB2, CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft sleeve. The ...
LUBI INDUSTRIES LLP
Flow: 20 l/min
Pressure: 20 bar
Power: 1.2 ch
... Electric motor pump assembly. AR 20 bp BlueFlex™ EM 4 poles 230 volt 50 Hz. Integrated control unit (VI 20). ...
Annovi Reverberi
Flow: 3.5 m³/h
Head: 7 m
Power: 0.16 ch
... Mag drive centrifugal pumps series ADM 4 PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. Thanks to the innovative mag drive system, pumps model ADM 4 ...
ALPHADYNAMIC PUMPS (UK) LTD
Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m
... PROLAC HCP is a range of close-coupled centrifugal pumps with hygienic design, compact and highly efficient. It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump cover, ...
INOXPA
Flow: 0 m³/h - 10.8 m³/h
Head: 20 m - 92.5 m
Power: 0.55 kW - 5.5 kW
... chemically pure liquids and free of foreign matters, with temperatures not higher than 80°C. PUMP: Horizontal axis pump with bronze closed impeller, pump body and base support made of G20 cast iron, ...
Conforto
Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
... out injection processes under static pressure. The system is easy to transport and can be operated in a 230 V / 50 Hz or in the US with a 240 V; 3 phase; 3 wire power network. The high pressure convey unit (HPCU) enables ...
Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m
... Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and air conditioning, ...
Pentax Pumps
Power: 0.4, 1, 0.75 ch
Width: 21.25 in
Height: 30 in
... demanding Liberty Pumps. Features Fully assembled and shipped with a clear disposable construction cover that will protect the system during rough-in and masonry work. Available with any of Liberty Pumps 2" solids ...
Liberty Pumps
Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW
... supply, voltage 380 V (error less than 5%), frequency 50Hz (error less than 1%). 2. Motor must be filled with clean water. 3. The first stage of the impellers of the pump should be immersed at least ...
Shanghai Weihu Pump Industry
Flow: 3, 9, 5 m³/h
Pressure: 12 bar
Head: 10 m - 115 m
... drinkable water (ACS version) COMPACT CLOSE-COUPLED DESIGN ■ Compact close-coupled design, robust and corrosion resistant ■ Plug-in type power cable and level control (floater) for easy replacement ■ Electric ...
Franklin Electric
Flow: 1 m³/h - 100 m³/h
Pressure: 1.6 MPa
Head: 160 m
... gas pump (LPG transfer pump), is mainly used in delivering liquefied petroleum gas, propylene, liquid ammonia, also for irrigation or various volatile liquids with similar nature or petroleum products. 1.YQB series ...
Zhejiang Yonjou Technology Co., Ltd.
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven by durable and ...
Flow: 11 l/min
Pressure: 825 bar
Power: 0.37 kW
... self-priming electrig gear-wheel pumps EP are designed to transfer and dispense oil. An integrated bypass-valve limits the max. oil pressure. The pumps feature a protected switch and must be shut off after operation. ...
Power: 0.55 kW - 1.5 kW
Input diameter: 50, 34, 40 mm
... Our centrifugal milk pumps are built entirely in AISI 304L stainless steel, and electropolished. Made entirely within the company, they have only certified made in Italy finishing accessories. This guarantees a high level of quality. They ...
Flow: 2.75 l/min
Pressure: 125 mbar
Length: 51 mm
... Return to Miniature Diaphragm Pumps for Air and Gas range. Vibrating Armature The vibrating armature drive is essentially wear free providing superior life in comparison to all other motor types. Available in 24 V ...
Boxer GmbH
Flow: 1 m³/h - 400 m³/h
... is that it takes special plate as impeller, pump fluid medium from inlet and discharge to the outlet by its Physical viscous driven and special structure of impeller. BOBP-type centrifugal flat impeller pump deliveries ...
Flow: 13 l/min - 132 l/min
Head: 6 m - 32 m
... equipped with a high quality two-phase electric motor equipped with a practical tilting inverter. They are really multifunctional pumps, capable of solving multiple pumping problems. For each application, it is necessary to check the ...
Tellarini
Flow: 0 m³/h - 450 m³/h
Head: 0 m - 100 m
Power: 4, 3 kW
... Standardized centrifugal pumps type NB are single-stage horizontally mounted pumps. They are characterized by a maintenance-friendly design and can be used in a wide variety of applications. 18 sizes are available to ...
SCHMALENBERGER GmbH + Co. KG
Flow: 40 l/min - 86 l/min
Head: 10 m - 30 m
Power: 370 W - 1,500 W
... container without changing any setting. Working principle & Construction BESM pump is blades pump which construction between water ring pump and peripheral pump. So it can get ...
Flow: 3.5, 3.3, 3.2 m³/h
Head: 0 m - 60 m
Power: 0.5 ch - 1 ch
... This is very common domestic centrifugal pumps with modified features. The CRP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G1 or Rp1. MATERIAL ...
Flow: 20 l/min - 60 l/min
Head: 10 m - 20 m
Power: 0.37, 0.55 kW
... AC Fuel Ex-Proof Transfer Pump for Gasoline Refueling (YB-60FB) Product introduction: This explosion-proof fuel transfer pump is suitable for use with Gasoline,Diesel,Kerosene and Methanol. It is aimed for convenient ...
Yongjia Jiangbei Yiben Machinery Company
Flow: 2 m³/s - 20 m³/s
Pressure: 10, 25, 16 bar
Head: 14 m - 50 m
... VFD constant Pressure Pumps are designed to start and stop over and over again without causing damage to pump's motor. It allows the motor to gradually ramp up to meet the actual flow and pressure demand within the range ...
Zhejiang Wasinex Intelligent Technology Co., Ltd.
Flow: 10 l/min - 250 l/min
Pressure: 70 bar - 250 bar
Fluid temperature: 25 °C - 90 °C
... Three-es manufactures pumping sets with various flow and pressure characteristics, plug&play and optimised for any washing system. Each pumping unit is assembled using only high quality components. The Three-es pumping ...
Three Es
... construction of the filter unit are a guarantee of durability and degree of high filtration (< 1 ) of OMG Filter Pumps. All the components of unit pumps are produced by turning and milling polypropylene, and 316L stainless ...
the best suppliers