Flow: 1,000 l/h - 15,000 l/h
Pressure: max 2.0 bar
Power: 2.2 kW
... Range of 100% French-made, helical lobe
pumps with EPDM rotors (CE1935/2004) overmolded onto a 316L stainless steel core.
Designed in-house, our lobe
pumps truly stand out thanks to their
compact ...
TECHNOPOMPE
Flow: 2,000 l/h - 30,000 l/h
Pressure: max 3.0 bar
Power: 4 kW
... Range of 100% French-made, helical lobe
pumps with EPDM rotors (CE1935/2004) overmolded onto a 316L stainless steel core.
Designed in-house, our lobe
pumps truly stand out thanks to their compact construction. The aluminum housing integrates ...
TECHNOPOMPE
Flow: 500 l/h - 15,000 l/h
Pressure: 2 bar
Power: 1.5 kW
... features that significantly increase pump performance. Our modeling research and the quality of the elastomers used make our rotors more durable thanks to improved vane expansion. More dynamic in contact with the fluid, the pump ...
TECHNOPOMPE
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 187 cm
... -pressure pump should be repaired every six months to prevent working with illness. During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... HW200HFZ-S series high pressure plunger pump is a new type of medium-low pressure and large flow pump developed by our company. The input power can reach 264kW. The hydraulic end uses the finite element analysis method, ...
Tinajin Harvest
Flow: 246 l/min - 510 l/min
Pressure: 40 bar - 240 bar
Power: 30 kW - 110 kW
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 0.0001 l/min - 3 l/min
Pressure: 5 MPa
Width: 276 mm
... Preparative HPLC pump with a very high flow rate of up to 3000 ml/min at the output pressure of up to 5 MPa (725 psi). The ECP301 L preparative pump is an innovative, powerful, and cost-effective unit for preparative ...
Flow: 10 l/min - 130 l/min
Pressure: 0.2 bar - 0.8 bar
Head: 1 m - 8 m
... Single-phase motor 230 V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump from overheating even when partially submerged. Liquid temperature in ...
Flow: 90.4 m³/h
Head: 30.6 m
Power: 27 kW - 28.8 kW
... The products range (about 856 among pumps and mixers) includes different models according to a variety of models,from 0,5 kW to 350 kW, 2-4-6-8-10-12 poles (50Hz and 60 Hz). CONSTRUCTION DATA Submersible electric pumps, ...
Flow: 16 m³/h
Head: 33.3 m
Power: 4 kW - 4.5 kW
... The products range (about 856 among pumps and mixers) includes different models according to a variety of models,from 0,5 kW to 350 kW, 2-4-6-8-10-12 poles (50Hz and 60 Hz). CONSTRUCTION DATA Submersible electric pumps, ...
Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... )*60HZ 0.5~20HP (0.37~15KW)*50HZ Motor Spec.: IP54~IP55 / InsulationE,B,F SFF:1.0~1.15 1Phase 110 V/220 V/240 V (0.5HP~2HP) 3Phase 220 V/ 380 V/415 V/440 V/660 V Frequency: ...
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
... 3. Discharge/suction flanges are using adhesive to connects to the pump. It will solve leakage or damage problems caused by connection to the thread of inlet/ outlet. 4.On top of pump casing, we have designed a cup to ...
Flow: 10 l/min - 15 l/min
Pressure: 0.5 bar - 8 bar
Power: 0.55 kW - 0.75 kW
... 3‑phase AC); G: BLB (explosion‑proof brushless DC)
Voltage: 220
V /
380
V
Power: 550 W / 750 W
MICRO GEAR PUMP Technical Parameters
Model example: MPB150BADF220
V550W
Medium ...
Flow: 6,000 l/min
... Self priming centrifugal pumps are characterized by their capability to prime automatically even with empty suction pipe and without footvalve. Thanks to their rational and advanced design, the quality of construction materials and manufacturing ...
Flow: 6 m³/h - 570 m³/h
Pressure: 1 bar - 70 bar
Head: 10 m - 700 m
... Various industrial sectors like: alimentary, petrochemistry, steel industry, Oil & Gas Category: Deep well submersible pumps Related products ...
Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW
... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...
Flow: 145 l/min
Pressure: 6, 3 bar
Head: 6, 12 m
... Using a drum pump in such transfers eliminates all these negativities. Accordingly, drum pumps fall into two different cataegoris; as electric & air powered. At the same time, upon the transferring chemical properties, ...
Flow: 2.2 l/min
Pressure: 220 bar
Power: 0.75, 3 kW
... The Mirò injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. It is recommended for the injection ...
LARIUS SRL
Flow: 2.2 l/min
Pressure: 220 bar
Power: 3 kW
... The Mirò Cold injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. The Mirò Cold model, with belt ...
LARIUS SRL
Flow: 4 l/min
Pressure: 220 bar
Power: 1.1, 3 kW
... The Dalì Cold injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. The Dalì Cold model, with belt ...
LARIUS SRL
Flow: 2 m³/h
Head: 0 m - 15 m
Power: 0.26, 0.31, 0.4 kW
... metres Specifications and advantages: Electric pump for AdBlue Characteristics Fluid - Adblue, Water with low solids contect Technology - Membrane ATEX - No Pump - Equipped Pump ...
Pompes Japy
Flow: 90, 100 l/min
Head: 0 m - 6 m
Power: 600 W
... Electric barrel-emptying pumps Descriptive Technical data Pump/motor coupling: 1/8 turn quick connector Probe length: 1000 millimetres Outer Ø: 40 millimetres Density: 1.3 (F-PVDF1000-520), ...
Pompes Japy
Flow: 135, 120 l/min
Head: 8, 7 m
Power: 700, 600 W
... Pump marking: ATEX 94/9/CE ATEX II 2G IIB T3. Technical data Pump compliant with ATEX standard 94/9/EC ATEX II 2G IIB T3 Max. viscosity: 800 cP Max. density: 1.6 IP 54 and non-Atex plug Pump/motor ...
Pompes Japy
Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W
... One-Stop Solution for Compact Wastewater Treatment. Embedded control panel and the switching valve. Capable of setting programs optimized for SBR and other wastewater treatment systems. A program for the US market is also available. ・Domestic ...
HIBLOW
Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W
... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small capacity ...
HIBLOW
Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W
... Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding ...
HIBLOW
Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... flow capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and ...
M&C TechGroup Germany GmbH
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
... - Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material of sample-contacting ...
M&C TechGroup Germany GmbH
Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C
... - Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - ...
M&C TechGroup Germany GmbH
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
... High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...
Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W
... Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and we will be glad ...
Flow: 18.5, 17.4 l/min
Head: 18, 12.7 m
... Magnetic drive provides an energy efficient thermal shield to minimise heat transfer to the pumped liquid. Variable pump body orientation Adaptable mounting foot positions Compatable with standard fittings Deep groove ball bearings ...
FLOJET
... applications for chemistry diaphragm pumps include evacuating chemically aggressive gases and vapors from such equipment as rotary evaporators, vacuum drying cabinets and centrifugal concentrators Chemistry diaphragm ...
Radleys
Flow: 56, 72 l/min
Power: 370, 500 W
... DEVIL 70). • - Speed: 2.800 rpm • - Power Watt: 370 W (DEVIL 55) , 500 W (DEVIL 70). DEVIL 55 230 V. / 400 V. ( Image 1-2-3-4-5-6 ) DEVIL 70 230 V. / 400 V. ( Image 7-8-9-10-11 ) ...
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
... A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a pumping ...
Elettromeccanica Delta S.p.A.
Flow: 4.1 l/min
Pressure: 4,100 bar
Power: 37 kW
... The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier Pumps. Dependable and easy to maintain, the HERO 50 can cut and trim a large array of materials including ...
JET EDGE
Flow: 5 l/min
Pressure: 0.8 bar
Fluid temperature: 125 °C
... free vacuum or pressure source, in a tough and compact polycarbonate case which conforms to IEC 1010 safety. • Whisper quiet, continous operation and ruggedly reliable. • Optional vacuum tweezers for ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Flow: 33.5, 25.4 l/min
Pressure: 75 psi
Head: 32'00" ft - 45'00"
... Integrity Series Pumps offer a flexible and robust solution to OEM applications. Constructed with a proprietary blend of PPS, the INTG3 is compatible with a wide variety of fluids. By manufacturing the motors and the majority of ...
Gorman-Rupp Industries
Flow: 1.5 us gal/min
Pressure: 30 psi - 70 psi
Length: 224 mm
... LEFOO demand delivery pump is a type of diaphragm volumetric pump. The diaphragm plays a sealing and protective role in isolating the transmission medium and the power end (motor). At the same time, the regular movement ...
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
... This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also a safety by-pass valve ...
the best suppliers