Aluminum actuators

Stroke : 1 in - 24 in
Force: 49 N - 147 N

... High Speed Electric Linear Actuators for Precise Operation Requirements Speed and precision are two primary requirements for applications involving linear actuators. Industries such as conveyance, automation ...

Stroke : 67 mm - 1,380 mm
Speed: 0.27 m/s - 1.12 m/s

... Reduced price, only valid for stock items. The linear actuator GKA4270-600-12N-P5 is a compact positioning module with a rail guide and a precision ball screw. The U-profile made of Aluminium (steel in the GKS series) ...

... installed. Moreover, the die-cast, powder painted aluminium body will resist to all environmental conditions. Each ROTELLO series swing gate actuator is electromechanical and it has been studied to satisfy a variety ...

... for gates weghing up to 3600kg with speed double respect standard models, cover in die-cast aluminum, fan-cooled motor, electronic adjustment of the force, etc. ...

Stroke : 10 mm - 500 mm
Force: 23 N - 295 N

... COVERS Anodized aluminium TUBE AISI 304 Stainless steel PISTON Brass SEALS Ø8-10-12 Polyurethane – NBR Ø16-20-25 Polyurethane GUIDE BUSH Sintered bronze PISTON ROD AISI ...

Stroke : 25.4 mm - 300 mm
Force: 150 N - 1,000 N
Speed: 5.5, 7.5, 12.3, 23.5, 36.5 mm/s

... Linear actuators for direct current with dynamic force up to 1000N. These actuators include a range with supply voltages between 12-24V and can, depending on the type, be supplied with encoder, potentiometer and adjustable ...

Pressure: 250 bar
Force: 1,567 N - 34,100 N
Torque: 200 Nm - 6,000 Nm

... SPECIFICATIONS Working Pressure up to 250 bar Torque up to 250.000 Nm Angle of Rotation up to 1.080° Special Angle of Rotation up to 1.500° All sliding surfaces are surface-hardened Rotary pistons can be run to their end stop positions and loaded Rotation ...

Stroke : 1 in - 12 in
Speed: 0.2 in/s - 3.54 in/s
Operating Temperature: 5 °C - 40 °C

... compatibility and offers a wide stroke range from 1” to 12” off the shelf. High-quality materials such as the stainless steel stroke rod and aluminum alloy housing combined with an IP65 rated ingress ...

... SS rotary actuators provide the "Muscle" for your lifting, turning, indexing, opening, closing, clamping, mixing, bending, testing, steering...applictions. For larger aluminum units, please consult factory. ...

Stroke : 50 mm - 300 mm
Force: 1,000 N
Speed: 6 m/s - 45 m/s

... ball screw nut or a trapezoidal nut. It is installed on a prismatic linear bearing rail that is installed within an extruded aluminum housing. The rodless cylinder transforms movement into a linear motion. ...

Stroke : 50, 100, 150, 200, 250 mm
Force: 110 N - 370 N
Speed: 1.5 mm/s - 5 mm/s

... smallest electric in-line actuator in our product line, handles minor lifting tasks. Besides the elegant design. Our con25 is ideal where size is limited by design or functionality. The electric in-line ...

Bore: 50 mm - 1,000 mm
Pressure: 10 bar
Rotation angle: 90, 180 °

... Bottom hole size is in conform to IS05211, DIN3337. Constructional style: 2 sections Start and ending position:±5° Lockable at anywhere Output axle: 45# electroplate ...

Force: 25 N - 1,350 N
Speed: 1.2 mm/s - 45 mm/s

... DAMT telescopic actuator Direct current electric actuator telescopic with trapezoidal spindle pitch 3mm or 2mm. Motor is parallel to the axle. Actuator body in zamac and aluminum. ...

Stroke : 50 mm - 1,000 mm
Force: 10,000, 40,000 N
Speed: 39 mm/s

... Low-Noise actuator for industrial/medical applications. The MLA1series linear actuator is Movetec’s flagship model suited for industry and healthcare applications. MLA1is available with IP54, IP66 or IP66W protection. ...

Stroke : 8,000 µm
Speed: 0.17 m/s

... Gatepost made of raw aluminium. Operator unit and controller integrated. Housing made of aluminium -10 years warranty against rust perforation. Soft-start and soft-stop, stageless. The ORBIT is available in the standard heights 1,250mm, 1,500mm, ...

Stroke : 25.4 mm - 101 mm
Pressure: 1.4 bar - 8 bar
Force: 111 N

... for non-lube air operation, allowing for OSHA compliance. *Piston seals are U-cup type for long service life. * Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing. ...

Stroke : 10 mm - 800 mm
Rod diameter: 16 mm
Force: 1.36, 2.03, 1,380 kN

... by default; DGRST55 is made of aluminum profile material,square shape, which has beautiful appearance and texture,with more sturdy and durable performance than the general ordinary ones. High Precision Linear Actuator/Electric ...

Speed: 0 m/s - 0.1 m/s

... linear rail and ball screw İt offers precise operation in automation and machine design. Technical Specifications Body; Aluminium (6063) 45x90 (A) and 90x90 (L) Profile Speed; Vmax = 0.1 m / s - 0.13 m / s Drive; Trapezoidal Screw ...

Torque: 4 Nm - 4,000 Nm

... Rotary Actuator • Available in sizes 40 mm to 300 mm • Torque range 4Nm to 4000Nm • Compact Rack & Pinion design. • Hard anodized aluminum body. • ISO 5211 & Namur Standard mounting ...

Pressure: 2 bar - 8 bar
Torque: 4.6 Nm - 13,024 Nm
Operating Temperature: -40 °C - 150 °C

... can be customized and as options, stainless steel and aluminium alloy are also available. Actuator Body The aluminum extrusion is hard anodized(over 30um) to protect against wear ...

Stroke : 150 mm - 6,000 mm
Force: 20,470, 5,118 N
Speed: 10,160 m/s

... *Extruded aluminum actuator body with T-slots for ease of mounting *Easy to adjust belt tensioner *One piece, machined and stress proof shafted pulley *Zero backlash belt to pulley design *Corrosion resistant components *Longer ...

Pressure: 2 bar - 10 bar
Rotation angle: 0 ° - 90 °
Operating Temperature: -47 °C - 150 °C

... compact pneumatic actuator. Its scotch yoke mechanism is specially suited to valves requiring high torques at start and end of stroke. Àvaîlable în several configurations with a wide range of options and accessories. DR/SR actuators ...

Pressure: 8, 10 bar
Rod diameter: 32 mm - 340 mm
Operating Temperature: -22 °F - 212 °F

... The ECON double acting pneumatic actuator is designed to include a compact rack and pinion design and the use of aluminum parts. These actuators are lightweight and compact. Apart from the position indicator, ...