Aluminum valves

DN: 50 mm - 200 mm
Pressure: 6, 10 bar
Temperature: 0 °C - 95 °C

... Working position: Any Features •high tightness •seat materials EPDM/NBR/SILICONE/STEAM SILICONE/VITON/HYPALON/NEOPREN/FLUCAST •central disc bearing •environment-friendly •one piece body ...

... Nickel Aluminum Bronze Lug Butterfly Valve The general properties of Nickel Aluminum Bronze are good castability, high strength and outstanding corrosion resistance. Nickel Aluminum ...

DN: 3 in

... The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel ...

... •Silicon tubes: 6×4, 8×5, 9.5×6.5 mm •Pressure range: Pilot : 3 – 8 bar •Body material: Aluminium Function2 Way, 3 Way Tubes• 6x4 • 8x5 for 2 Way only • 9 5x6 5 for 2 Way only Pressure rangeFluid : according to tube specifications Pilot ...

DN: 6, 10, 13, 20, 25 mm
Pressure: 420, 500 bar

... HIGH PRESSURE BALL VALVES FEMALE/FEMALE PN400 High pressure ball valve : - Stainless steel 316 body, ball and shaft - POM seats - Buna O-ring - Steel or aluminium handle - Female/Female ...

DN: 100 mm - 400 mm

... Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive. ...

DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of valve. ...

DN: 80 mm - 100 mm

... Pinch valves suitable for intercepting a wide range of products. - Size 80 - 100 mm - Valve composed of two identical half-bodies, both for the external part in aluminum and for the internal gasket - ...

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased in size by ...

DN: 80 mm - 125 mm
Pressure: 16 bar

... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY FIG.11-12-13 – CAST IRON EN GJL-250 EN 1561 FIG.11S-12S-13S ...

DN: 8 mm - 100 mm
Pressure: 16 bar - 64 bar
Temperature: -20 °C - 130 °C

... Reduced bore ball valve, F/F threaded, with pressed steel handle. ...

DN: 150 mm - 455 mm
Pressure: 1 bar
Temperature: 80 °C

The Vortex® Maintenance Gate is designed to shut off material from a hopper or silo when maintenance of downstream equipment is required. In the open position, it positively seals conveying air and material to atmosphere. The hand crank gearing is designed ...

... Pneumatic Actuated Emergency Shutdown Valve Ball Valve KITZ Oil Media Stainless steel 5K ball valve with pneumatic actuator KITZ with veson pneumatic actuator type (double acting) [Features] · ...

DN: 0.25 in
Temperature: -20 °C - 70 °C

... Dependable safety valve to retain a set supply air pressure and guarantee a steady process control when a supply air is suddenly failed by accident and its pressure becomes lower than a set pressure Features - Rugged aluminum ...

DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

... FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with gasket with wiper ...

... Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry ...

DN: 50 mm - 3,500 mm
Temperature: 0 °C - 600 °C

... High Performance Wafer Butterfly Valve Fabricator: High Performance Butterfly Valves, Wafer Type, 2-140 Inch, 50-3500mm, 150-1500 LB, CS, SS, Aluminium Bronze. The Med Wafer High-Performance Butterfly ...

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

... One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For all flammable gases ...

DN: 100 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 80, 400, 250 °C

... medium grained bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Cast iron, cast aluminium, cast stainless steel 1.4308MATERIAL SLIDING PLATE :Stainless steelSLIDING PLATE GUIDING :Eccentric roller galvanized structural ...

DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C

... Reduced bore ball valve, F/F threaded, with pressed steel handle. ...

DN: 0.125 in - 0.31 in

... compressed-air, oil, water and vaccum systems. Allows ideal flow control according to system requirements. -Handle made of aluminum with brass pin, o-ring of Nitrile rubber with two supporting washers. -Upon order, we produce units ...

Temperature: 0 °C - 600 °C

... IV with metal seals. The Vatac High Performance valves are available in Soft Seat (Up to 200°C depending on size and pressure), and Metal Seat (Up to 600°C) variants (fire safe on application). Vatac ...

DN: 2 in - 6 in
Pressure: 2,000, 3,000, 5,000, 7,500 psi

... Demco DM Mud Gâte Valves for the rigorous requirements of oilfïeld applications. We designed them designed for dependable, heavy-duty performance in abrasive and erosive service conditions. The Demco sériés DM mud gâte valves ...

... Manufactured in cast aluminium with stainless steel slide plate, the Rotoslide is a compact isolator in manual and automatic version. It is jam-free owing to the pivot operation mechanism and meets the dust containment ...