Flow: 5 l/min - 298 l/min
Operating pressure: 5,300 Pa
Nominal power: 36 W
... Maximum continuous operation state - Unit - Data Rated current - A - 1.5 No-load speed - rpm - 37000 Rotation speed at maximum wind pressure - rpm - 42000 Maximum flow (wind pressure = 0) - L/min - 298 Speed at maximum flow - rpm - 37500 ...
Zhejiang Weicheng Blower co.,ltd
Flow: 500 m³/h
Nominal power: 210 W
Sound level: 76 dB
... AURORA’s Radial Blowers are built with powerful electric motors for high efficiency throughout a long lifetime of performance. These blowers feature a high proportion of air flow vs. system resistance. All radial blowers ...
Flow: 5,400 m³/h
Nominal power: 700 W
Weight: 11.8 kg
... XPOWER P-800TH HIGH VELOCITY 700W CENTRIFUGAL AIR MOVER WITH TIMER, WHEELS FOR COMMERCIAL & RESIDENTIAL DRYING, AIR CIRCULATION & WATER DAMAGE RESTORATION Powerful High-Velocity Airflow： Delivers up to 5400 m³/h airflow at 1350 RPM, ensuring strong ...
XPOWER GmbH
... Operation: Blowers are lobe or screw-type volumetric devices. They generate a pulsating air flow inside a sealed chamber. The lobes or screws move in the opposite direction, compressing and expanding the air in a cyclic manner. Advantages: ...
Nominal power: 0.15, 0.22 kVA
... HAUG’s Ion-Air blower IB is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air flow hence becomes conductive and is able ...
HAUG
Flow: 120 m³/h - 522,000 m³/h
Operating pressure: -360 mbar - 480 mbar
Nominal power: 0.55 kW - 2.55 kW
... The impeller of 2HB series was directly installed to the rotor, compress without contact. The bearing was out of turbine to make sure the stability. Air gets in through inlet 1, then enters side channel 2, impeller will push the air under high speed. ...
Dongguan Yazreid Electromechanical Technology Ltd
Flow: 10 l/min - 100 l/min
Operating pressure: 0 Pa - 4,500 Pa
Nominal power: 0 W - 29 W
... Scope This specification applies to Blower Kit:TF037C-2100-P (hereinafter referred to as "the PRODUCT"), a product of NIDEC COPAL ELECTRONICS CORP. (hereinafter referred to as "NCEL"). Contents of the kit are Micro Blower:TF037C-2100-F, ...
Nidec Copal Electronics
Flow: 37 m³/h - 183 m³/h
Operating pressure: 0.5 bar - 5 bar
Flow: 0 m³/h - 800 m³/h
Nominal power: 200 W
... The ECOBLOWER 351-C ionised air blower is designed to neutralize electrostatic charges on the surface of materials.. The three antistatic bars integrated in the unit generate a powerful and effective ion release. Thanks to the integrated ...
Flow: 40 m³/h - 2,640 m³/h
Nominal power: 0.2 kW - 20 kW
... Exhaust- blower fans with side ducts The operation of exhaust- blower fans with a side duct is based on the principle of downflow by means of vortexes created by the centrifugal thrust of a special impeller inside a peripheral ...
Flow: 0 m³/h - 7.2 m³/h
Operating pressure: 0.4, 0.6 bar
Nominal power: 0.35 kW
... DT 4 Air Blower for 1 Hot Air Welding Torch 0.4 bar, up to 60 l/min 0.35 kW AC motor, 230 V 1 socket Low operation noise Weight: 10.8 kg DT 6 / DT 6L Air Blower for 1 up to 2 Hot Air Welding Torches 0.6 bar, ...
Wegener International GmbH
Flow: 160 m³/h - 1,550 m³/h
Operating pressure: 20 mbar - 1,550 mbar
Nominal power: 0.25 kW - 15 kW
... Side Channel Blower - Single Stage Direct coupled engine Aliminum injection cast housing and fan Capacity: 160 - 1550 m3/h Operating Temperature -15 to +40°C Monophase option for 0.25 – 3 kW range Pressure applications: +250 ...
TMM BLOWER
Flow: 58 m³/min - 94 m³/min
Operating pressure: 63,700 Pa - 98,000 Pa
Nominal power: 90 kW - 200 kW
... DSR250G Roots Blowers are tri-lobe double oil tanks roots blowers, adopt the advanced technology of Japan, its air capacity is 58.0m³/min - 93.7m³/min, the pressure is from 63.7Kpa to 98Kpa. The main characteristic of ...
Shandong Dacheng Machinery Technology Co., Ltd.
Flow: 0.96 m³/min
Operating pressure: 217.118 Pa
Nominal power: 11.5 W
... - 125mm square x 32mm frame sizes - Thermal protection type - UL/cUL/TUV/cTUVus agency listed - Weight 340g - RoHs Compliance - Operating Temperature -10℃~70℃ ...
Flow: 530 m³/h
Operating pressure: 430 mbar
Nominal power: 7,500 W
... High-Pressure Ring Blower Operating Principle: The impellers in the air blower are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high ...
Operating pressure: 80 mbar - 435 mbar
Nominal power: 0.2 kW - 22 kW
... Dutair blowers are used worldwide for their highly reliable operation in the usual fixed frequencies of 50 and 60 Hz. The technical specifications comprise a range from 30 to 80 Hz in 10 Hz steps which makes Dutair blowers ...
Sjerp & Jongeneel
Flow: 613 m³/h - 64,825 m³/h
Nominal power: 0.12 kW - 11 kW
... Specification:2.5#~11.2# Power:0.12~11KW Flow rate:613~64825m³/h ...
... and supplies multi-stage high pressure fans (or blowers). These are used in the mineral processing and chemical industries where there is a need to supply relatively small flows at high pressure. Our blowers incorporate ...
Howden BC Compressors
Flow: 760 ft³/min
Operating pressure: 160 mbar
Nominal power: 3.7 kW - 7.5 kW
... JetAir Technologies’ JET-1™ Blower is the most efficient blower in its class engineered for moderate flow and moderate pressure applications from 5HP[3,7kW] to 10HP[7,5kW]. The JET-1™’s Direct Drive design and compact ...
JetAir Technologies
... product highlights 20% more efficient horse power. A Paxton XT 500 blower is an example of a blower that has 20% more flor (CFM) at a same pressure compared to a regular 5 Hp centrifugal blower. ...
Paxton Products
Flow: 40 m³/h - 60 m³/h
Operating pressure: 0 Pa - 8,000 Pa
Nominal power: 0.2 kW - 0.28 kW
... by the blades from the intake to the exhaust. There are no parts in contact between the stator and rotor; this means the blowers do not need lubrication nor routine maintenance. ...
Hpe Technology
Flow: 0 m³/h - 25,000 m³/h
Operating pressure: 0 Pa - 100,000 Pa
... The rotary piston blower is crucially comprised of a stator, which houses two symmetrical pistons, in the form of three toothed gears that turn in the opposite direction and at a uniform speed. The fluid to be transported penetrates ...
MAPNER
Flow: 3,395, 1,600 m³/h
Operating pressure: 1,300, 1,500 Pa
Nominal power: 1.5, 0.75 kW
... Portable centrifugal blower is designed for suction and extraction of fumes, gases, dirty air and light dust. DF/S blowers are great when fast, simple and temporary blower is needed. Availabe with 1-phase ...
Eurovac / suomen imurikeskus Oy
Flow: 120 m³/h - 1,200 m³/h
Operating pressure: 0.034 Pa - 0.27 Pa
Nominal power: 2.2 kW - 37 kW
... Standard Features: • - Auto Belt Tensioner • - Multiple mounting configurations • - Small size and footprint • - Adaptable to IEC & NEMA motors • - Lightweight aluminum construction Options: • - High inlet temperature (400 F) • - Thermocouple ...
SONIC AIR SYSTEMS
Flow: 170 m³/h - 200 m³/h
Operating pressure: -730 mbar - 1,040 mbar
Nominal power: 7.5 kW - 8.6 kW
... General features: ●Max Air flow to 2480m3/h; ●Rated vacuum to -730mbar; ●Rated pressure to 1040mbar; ●IE2/IE3 high efficiency is available; ●With Thermal protection (PTC); ●100% Oil free, Easy installation, Maintance free; ●CE, ROHS,UL,ATEX ...
Dereike
the best suppliers