Cast iron milling cutters

... Prototype TMD solid carbide thread milling cutter is ideal for cutting internal threads as well as drilling, countersinking and milling the threads in one operation. It is best suited ...

... grades (WKP25S and WKP35S) for steel and cast iron machining - 3 PVD-coated grades (WKK25S, WSM35S and WSP45S) for steel and cast iron machining, ...

... efficiency thanks to high metal removal rate, even on low-performance machines Soft cutting action due to positive cutting edge geometry Low cutting material costs due to 14 cutting ...

Diameter : 20 mm

... conventional thread milling cutters due to the additional cutting edgesOne and the same tool for different tolerancesOne and the same tool for different diameters > nominal X with same ...

Diameter : 3 mm - 16 mm
Rotational speed: 15,000 rpm

The JEL® Drill thread milling cutter BGF with three cutting flutes is a high-efficiency device that features optimum support resulting in higher stability. This device allows for problem-free ...

Diameter : 6 mm - 12 mm

Komet offers BGF NZ 4, a drill thread milling cutter designed with 4 cutting flutes. This is built especially for grey cast iron, but can also be applied ...

Diameter : 25 mm - 200 mm

The highly flexible Double Octomill™ R220.48 face milling cutter functions as a roughing and finishing tool in one. It is designed to last long thanks to the HSS pins. The HSS pins are strategically positioned ...

Diameter : 50 mm - 160 mm

FACE MILLS - NEAR90 - INSERT SIZE 12Cutter range 50-160 mm (2-6 inch)Max depth of cut 9 mm (0.354 inch)Recommended depth of cut 6 mm (0.236 inch)8 cutting edges, double-sided inserts

Diameter : 63 mm - 160 mm

FACE MILLS - NEAR90 - INSERT SIZE 16 Cutter range 63-160 mm (2-5 inch) Max depth of cut 13 mm (0.511 inch) Recommended depth of cut 8 mm (0.315 inch) 8 cutting edges, double-sided inserts

The Powder metal HSS Endmills from Arno Werkzeuge are suitable for use in machining steel, stainless steel, cast materials, aluminum, non-ferrous materials, titanium and titanium alloys. These devices ...

... and chatter-free deburring and countersinking. It is also appropriate for steel, cast iron, non-ferrous and light metals. The units provide good outcomes at low cutting speeds. This ...

Diameter : 3 mm - 12 mm
Length: 57 mm - 83 mm

... Offers good impact strength and cost efficient machining due to high productivity achieved with both high feed and cutting depth. Suitable for face milling of cast ...

... stainless steels, while geometry R is for cast iron and hardened materials. To support this addition, we have expanded our current line of versatile SRC copy milling cutters. ...

Diameter : 50 mm - 160 mm
Length: 40 mm - 63 mm

... serviceable cutting edges per indexable insert ◼ High-performance high feed geometry for face milling operations ◼ Stable indexable insert geometry for machining steel and cast materials ◼ ...

Diameter : 6 mm - 32 mm

Clamping element. Straight shank with clamping flat (Weldon) according to DIN 1835 B. Type NR-F. For machining of materials of lower and medium strength (up to 700 MPa), surface roughness Ra 3,2 and more, in common ...

Diameter : 3 mm - 20 mm

... the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.

Diameter : 50 mm - 200 mm

... steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa. Tool geometry. Helix angle = 10°. Rake angle = 12°. Cutting ...

Diameter : 1 mm - 25 mm

... offers more than 1,800 different rotary burrs in stock. 15 different cutting edge shapes and 9 different cutting edge geometries, as well as special end mills for locksmiths and mini cutters, ...

Diameter : 50 mm
Length: 50, 100, 75 mm

Product introduction ： HP-MAX Ball End Mill 2-Flute 30 Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, military ...

Diameter : 3 mm - 20 mm
Length: 100, 75, 60, 50 mm

Product introduction ： HP-MAX Flat End Mill 4-Flute 35° Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, military ...

Diameter : 1 mm - 20 mm
Length: 50, 60, 75, 100 mm

Product introduction ： HP-MAX Long Flute Flat End Mill 4-Flute 35° Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, ...

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

MASAM Cylindrical End Mills is focused on the specific diameters and lengths of the working and clamping parts of the tool that are not offered in common "catalog solutions". Cylindrical End Mill is design accordining drawing documentation ...

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

... delivered to our customers based on the final workpiece shape with the individual tolerances that need to be met with the cutting tool. Based on the customer request MASAM prepares tool design and the technological process ...

Diameter : 2 mm - 40 mm
Rotational speed: 100 rpm - 50,000 rpm
Length: 0 mm - 250 mm

Spherical and Ball Nose End Mills MASAM are generally intended for milling of free form surfaces. Using of MASAM Spherical and Ball nose end mills is to the specific diameters and lengths of the working and clamping parts ...

... Advantages Provides a 25-50% increase in tool life over the competition Increased strength and rigidity when cutting forces are applied Standard cutting lengths accommodate multiple applications without ...

... affordable price One tool can cut right and left hand threads Increased strength and rigidity when cutting forces are applied Standard cutting lengths accommodate multiple applications without ...

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

Diameter : 4 mm - 40 mm
Length: 55 mm - 155 mm

Diameter : 6 mm - 40 mm
Length: 68 mm - 217 mm

Diameter : 10 mm - 125 mm
Rotational speed: 15,500 rpm - 85,000 rpm
Length: 25 mm - 250 mm

The 7690VA series milling cutters are ideal for roughing, semi-finishing, and finishing applications in steel, stainless steels, cast iron, high-temperature alloys, and ...

Diameter : 17.8, 22.5, 28.8 mm
Rotational speed: 1,280 rpm - 11,470 rpm
Length: 30, 35, 40 mm

... possible to process from semi-finishing to finishing with high efficiency Good sharpness positive design High efficiency cutting tool with three edge specification Economical three corner specification insert tip Unique ...

Diameter : 16 mm - 40 mm
Length: 31.75 mm - 205 mm

The economical yet efficient DR-TWIST line provides a near perfect solution for machining large diameters when powerful machinery is not available.

Diameter : 20 mm - 600 mm

... through HSC machining Maximum metal removal rates as well as high feed rates and cutting speed combined with high surface quality - no problem with the milling system MaxiMill HPC! Economic: ...

Diameter : 6.3 mm - 31 mm
Rotational speed: 150 rpm - 1,200 rpm
Length: 31 mm - 71 mm

Designed specifically for processing conventional steels and cast iron Suitable for upright drilling machine (points system): 2 of 4 points Suitable for drill (points system): 3 of 4 points Suitable ...

For cast iron, steel and stainless steel Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum ...

... for applications that involve cutting aluminum and cast iron materials. These apparatuses showcase immediate modification of cutting edge heights (up to 1 μm of each ...

Diameter : 1 in - 6 in
Length: 3.38 mm

Heavy Duty 45 degree lead facemill series is ideally suited for massive chip-loads in forged steels, cast steels and irons Ingersoll’s “Shear-Clear” combines extremely strong insert with high ...

Diameter : 40 mm - 315 mm

It's a multipurpose side and face cutter, with a spring-loaded cassette, that offers a wide range of mounting options. The product is flexible and contains round insert options, as well as an assortment of corner radii. ...

Speed Finisher is a high speed cutter for aluminum & cast iron offering mirror-like finishes. Each cutting edge height is adjustable to within 1μm of each other. -Quick ...

Diameter : 80 mm - 500 mm

The Auto AF is a face milling cutter manufactured by Sandvik Coromant. It is specifically suitable for finishing cast iron parts that require a superior finishing performance. ...