Cast iron valves

... Piece Ball Valves are with main Features as below: » Size Ranges: 1/4” through 2” » Pressure Ratings: 1000WOG, 2000WOG, 3000WOG or ANSI #150 to 2500 » Standards compliance: API 6D, BS 5351, ASME B16.34, DIN 3202 or ...

DN: 0.25 in - 12 in

... Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check & Wafer Check Valves Through Conduit Gate Valves – Cast Steel Pressure ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: 2 °C - 220 °C

The Honeywell two way control globe valve V5328A is a complete series of single-seated straight through valves PN 16. They are suitable for heating, ventilation and air conditioning systems (HVAC). The ...

DN: 15 mm - 150 mm
Pressure: 16 bar

Pneumatic compact ball valve is investment casting made wafer type flanged ball valve, has super short monoblock compact structure, design with ISO 5211 platform to make the actuator directly installed. ...

DN: 1.81 in - 9 in
Pressure: 2,000 psi - 20,000 psi
Temperature: 75 °F - 350 °F

DEENPU Gâte Valve ‘FC’ type is a field-proven valve which provides reliability and interchangeability, bi-directional sealing and a non-rising stem making it ideally suited for drilling Manifolds, X-mas ...

Manufactured in cast aluminium with stainless steel slide plate, the Rotoslide is a compact isolator in manual and automatic version. It is jam-free owing to the pivot operation mechanism and meets the dust containment ...

DN: 40 mm - 600 mm

Concentric electric butterfly valve / soft seal with resilient seat/low torque design Features Soft seal butterfly valve  - Body type: wafer or lug  - Body material: Ductile iron, ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

Description 2/2-way valve Impulse without differential pressure Body Cast iron

DN: 15 mm - 300 mm
Pressure: 4 bar - 10 bar
Temperature: -30 °C - 180 °C

... installed as a tight shut-off or control valve in lines particularly containing abrasive or corrosive chemicals,slurries,powders,gases and high viscosity liquids with suspended solids which tend to clog conventional valves.Face ...

DN: 6.35 mm - 25.4 mm
Pressure: 300, 350 bar
Flow rate: 200, 120, 60, 90 l/min

4 ways inverter valve, cast iron painted body. Zinc plated stem. Available in 1/4 – 3/8 – 1/2 – 3/4 – 1G both open and closed center.

DN: 50 mm - 150 mm
Pressure: 16 bar - 40 bar

... mains of sizes DN 50 to DN 150, ERHARD Flow Control Valves in straight or angle pattern throttle and control showing excellent results. Globe type ERHARD Control Valves with body of ductile cast ...

DN: 50 mm - 1,400 mm
Pressure: 16 bar

... Face to face - Wafer short, acc. EN558-1/2 Series 20 API 609 Cat. A Body material - Grey cast iron Nodulair cast iron Steel cast Stainless steel ...

DN: 2 in - 8 in
Pressure: 250 psi

... operation. Ductile Iron Construction The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. The tensile strength of ductile ...

... The valve is actuated pneumatically by either the compressor unloader solenoid valve or other pneumatic source on a cycle or regular basis, i.e. Air Dryer actuating source or a locomotive microprocessor ...

Temperature: -20 °C - 450 °C

... Besides butterfly valve, we can also offer gate valve, ball valve, globe valve, check valve, safety valve and so on. If you have any ...

DN: 1.5 in
Pressure: 200,000 Pa
Temperature: -20 °C - 55 °C

Characteristics Uses: the emergency shut-off valve is installée! on the inlet of the pipeline for the submersible pump type fuel dispenser. In case of accidents, for instance, the dispenser collapses or catches a fire, ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management ...

DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: -40 °C - 80 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide ...

DN: 50, 80, 100, 150, 200 mm
Pressure: 0 bar - 12 bar

... the priming chamber, resulting in opening of the deluge valve. HD deluge Valve is UL Listed. • Deluge Valve Model A • Fast application of water in spray, pre-action and foam system • ...

DN: 15 mm - 300 mm
Pressure: 125 psi - 900 psi

... Material - Cast Iron Application - Oil Fitting Color - Silver Power - Hydraulic Pressure - Triple Offset Butterfly Valve Features - Blow-Out-Proof, Casting Approved, Durable Number Of Way - 2way Are ...

DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C

Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast ...

DN: 40 mm - 300 mm
Pressure: 6 bar
Temperature: -10 °C - 110 °C

Wafer NP6/10/16/20* - GG25 cast iron + Epoxy body - cast iron polyamide coated butterfly - EPDMGasket - Temperature : EPDM = -10°C +110°C

DN: 50 mm - 250 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C

2-pcs. flange ball valve with ISO mounting flange. Full bore.