DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C
... Body material Ductile iron GGG50 PN (end) PN10/16-ASA150-JIS10K Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever ...
TECOFI
DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C
... Cast iron bail valve with ISO 5211 mounting pad full bore for ail common fluids of 2nd group. 2 FKM O Ring and 1 PTFE gasket on stem, PTFE body gasket and PTFE seat. Compatible with explosive atmosphère, ATEX Zone 1&21 ...
SFERACO
Pressure: 0 bar - 300 bar
Temperature: -10 °C - 80 °C
Flow rate: 50 l/min
... CETOP 3 modular single-way flow regulating valve, not compensated. Type for regulation inflows ...
EUROFLUID HYDRAULIC SRL
DN: 25 mm - 50 mm
Pressure: 16 bar
... Angle valve with threaded terminals for potable water or non-aggressive liquid systems. Flow regulation by rotation of the stem. Also available with counter-clockwise closing system. Vertical installation. - Materials: - Ductile cast ...
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
... Connection: Flanges according to EN 1092-2 Type 21 Leakage rate: EN 1349 – Seat leakage VI G 1 (tight seal) Body: Cast iron GG-25 EN-JL 1040 Valve/shaft: Brass CW614N / CrMo steel 1.4122 Cable gland seal: EPDM Servomotors: – ...
Regulation France
DN: 80 mm - 300 mm
Pressure: 16 bar
... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...
Hawle
DN: 15 mm - 150 mm
Pressure: 0.2 bar - 25 bar
Temperature: 250, 80, 200 °C
... series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves ...
VALSTEAM ADCA Engineering S.A.
DN: 2 in - 48 in
... Also known as Soft sealing elastic seat type midline butterfly valves has the function of switching and regulating fluid. - Compared with traditional gate valves, globe valves and ball valves, ...
Athena Engineering S.r.l.
Pressure: 25 MPa
Temperature: -40 °C - 80 °C
Flow rate: 220 l/min
... functions: lifting, stopping, and lowering. The product is equipped with an adjustable relief valve to achieve reliable protection for the entire system. The valve body is coated with electrophoretic coating, which greatly ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
DN: 15 mm - 300 mm
Pressure: 1.6 MPa
Temperature: -20 °C - 150 °C
... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
Yongkang Yonlin Industry & Trade Co.,Ltd Yongkang Lianggong Valve Co., Ltd.
DN: 1.5 in
Pressure: 200,000 Pa
Temperature: -20 °C - 55 °C
... Characteristics Uses: the emergency shut-off valve is installée! on the inlet of the pipeline for the submersible pump type fuel dispenser. In case of accidents, for instance, the dispenser collapses or catches a fire, the valve ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C
... Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C
... DeZURIK Eccentric Plug Valves' design features include eccentric action and resilient plug facings assure lasting dead-tight shutoff. Clean interior design and straight-through flow allow high maximum flow capacity with minimum pressure ...
DeZURIK
DN: 50 mm - 150 mm
Pressure: 16 bar - 40 bar
... mains of sizes DN 50 to DN 150, ERHARD Flow Control Valves in straight or angle pattern throttle and control showing excellent results. Globe type ERHARD Control Valves with body of ductile cast iron ...
DN: 15 mm - 300 mm
Pressure: 125 psi - 900 psi
... Material - Cast Iron Application - Oil Fitting Color - Silver Power - Hydraulic Pressure - Triple Offset Butterfly Valve Features - Blow-Out-Proof, Casting Approved, Durable Number Of Way - 2way Are you in search ...
DN: 0.75 in - 24 in
Temperature: -20 °C - 160 °C
... Ductile cast iron GGG40 body (standard), carbon steel on request DA SA Double Acting or Single Acting Standard temperature range (comprising actuator) -20° / +80° ...
MAROS Engineering
DN: 2 in - 10 in
Pressure: 250, 500, 150 psi
Temperature: -30 °F - 200 °F
... TECVAL model VRLP Pressure Reducing Valve, reduces upstream pressure to a predetermined pressure set downstream in spite of changes in flow or upstream pressure. Devices in ductile iron ASTM A536 flanged according to ...
Tecval
DN: 40 mm - 400 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C
... and Cover: Cast Iron with Rilsan (Nylon 111 coating. -Epoxy or enamel coating are available by request. -Bolts, Nuts and Washers: Zinc plated Steel. -Diaphragm: Natural Rubber reinforced with Nylon Fabric. Cross section ...
DN: 50 mm - 300 mm
... SYLAX® WAFER STYLE SERIES 149GA Body: Cast Iron Disc: 316 Stainless Steel Seat Liner: EPDM ...
Flomatic
DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C
... diagnostics of “ valve-actuator” system due to application of smart electro-pneumatic positioners high tightness of closure due to application of soft valve seats (with PTFE seals in the whole range of flows and characteristics, ...
Zaklady Automatyki POLNA S.A.
DN: 0.5 in - 4 in
Pressure: 16 bar
... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...
SIMPLE VALVE, S.L.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
... Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions. ...
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... 1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection - fixed ...
ZETKAMA Sp. z o.o.
Temperature: 196 °C - 650 °C
... American society of Mechanical Engineers standard ASME 816.34 valves are available in a complete range of body/bonnet materials and trims. Technical Specification Cast Trunnion Ball Valve are manufactured ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 400 mm
Pressure: 150 psi
... KNIFE GATE VALVE non rising stem Technical characteristics: stem: non rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder, color RAL5015 EPDM seat, bronze nut Nominal ...
BLUCAST
the best suppliers