- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Crimp connector
Crimp connectors
Impedance: 50 Ohm
Voltage: 1.5 kV
... popular coax connector for use in Mobile Radio equipment. It is a larger sized precision weatherproof connector supplied with a thread coupling. Depending on design, this connector can ...
TELEGARTNER
Impedance: 50 Ohm
Voltage: 335 V
... Assembly - C28 The SMA series is a very popular coax connector with threaded coupling, and can be used up to frequencies of over 18 GHz (depending on type). The impedance is controlled. Connector styles ...
TELEGARTNER
Impedance: 50 Ohm
Voltage: 750 V
... -Straight Plug Crimp G7 (RG-316/U) crimp/crimp Article name - SMB Plg str cr/cr G7 Au Series - SMB Cable group; cable - G7 (RG-316/U) RG-316/U KX 22A KX 3B RG-174/U RG-188A/U MRC ...
TELEGARTNER
... ✔ Barrel with funnel entry. “N” single crimp series: ✔ Polyamide insulation sleeve. ✔ Max. operating temperature: +105°C. ✔ “Easy entry” conical entry. ✔ Flammability rating: UL94V2. “51000” double crimp ...
Crimping Splices with Duall-wall Heat-shrinkable Insulation General features The crimping splice with waterproof seal is a connection made of a duall-wall heat-shrinkable insulation containing a thermoplastic adhesive integral ...
Primary current: 80 A - 300 A
Sockets 80-300 A with snap-in lock and crimp connection Material: brass, silver plated
Primary current: 80 A - 300 A
Plugs 80-300 A with snap-in lock and crimp connection Material: brass, silver plated
... approx. 57 S (braids and tubes). So the hereby used druseidt-crimp technology guarantees an extreme compressing and an optimal resistance by compressing the wires so much. By using our connectors ...
... available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. Features: The CON68 Connector ...
Al through connectors with partition 16 - 1200 mm² used mainly for connecting two Al conductors of the same size to each other two crimps on each side are necessary, crimp sequence ...
Elpress
Al through connectors with partition and for different areas 16 - 400 mm² used mainly for connecting two Al conductors of different sizes to each other two crimps on each side are necessary, crimp ...
Elpress
Al through connectors with cable stop 300 - 400 mm² used mainly for connecting two Al conductors of the same size to each other two crimps on each side are necessary, crimp sequence ...
Elpress
... configuration, e.g. first side Mxx-connector - second side individually confectioned (e.g. cable gland mounted or cable support sleeve moulded, common crimp connectors confectioned) ...
TNC-Male (plug) crimp connector, solder pin, no braid trim
Times Microwave Systems
Primary current: 13 A
Voltage: 8,000 V - 13,000 V
The Series-VarioPro is a high voltage circular connector that runs in a direct current voltage range of 8 to 13 kV. It has a working current of either 13 A or 30 A. This circular connector fabricated ...
GES Electronic & Service GmbH
Primary current: 80 A
Voltage: 250 V
... series is part of the Scorpion family and represent the most versatile modular power/signal connector on the market. SP series are standard profile connectors of 14.60mm height. Power contact options: ...
Positronic Industries
Primary current: 1.5 A - 16 A
Voltage: 277, 60 V
Circular connectors that combine an easy to use 30 degree locking mechanism with proven environmental sealing up to IP68 and IP69K. Available with rugged metal or plastic housings, they are ideal for applications where ...
Primary current: 5, 10 A
Voltage: 25, 60, 50, 250 V
... In addition to being extremely robust, these circular connectors are compact and available in various designs, making them very versatile. Time and cost saving during installation by using crimp contacts High ...
Primary current: 16 A
Voltage: 250 V
... from -40°C to +125°C Protection degrees: IP65 or IP67 Receptacles 2 + PE or 3 + PE Pins Solder, PE to screw, Solder or Crimp, PE to screw Terminals Operating Voltages 400 V AC/DC or 400 V AC/230 V DC Ambient Temperatures ...
Docking connector for 100,000 mating cycles and more. Reliable and automatic docking is required in many cases: whether for industrial robots, test systems or industrial tool changing systems. The contact stable and ...
Impedance: 50 Ohm
Voltage: 2,500, 1,000 V
Pitch: 0.875 mm
... solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; • Body is brass or stainless steel. The N type connector are designed to satisfy the need for a durable, weatherproof, ...
ROHO CONNECTOR LIMITED
Voltage: 1,500 V
Operating temperature: -50 °C - 125 °C
... , 4 hole panel or mountless options; • Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; • Body is brass or zinc. The UHF connectors are general purpose units developed ...
ROHO CONNECTOR LIMITED
Impedance: 50 Ohm - 75 Ohm
Voltage: 250 V - 750 V
Operating temperature: -40 °C - 155 °C
... bulkhead or mount-less; • Attachment methods include crimp/solder, solder or solder/solder; • Body is brass or stainless steel. The 1.0-2.3 connectors compact design allows for denser connector ...
ROHO CONNECTOR LIMITED
Primary current: 40 A
Voltage: 400, 6 V
Operating temperature: -40 °C - 125 °C
... ) - ≥500 Contacts Terminal: - crimp terminal Material - copper alloy Surface - hard-silver plated - hard-gold plated Contact resistance - ≤1mΩ Wire gauge - --mm2 - 1.5-10mm2 --AWG - 16-8 Tools Crimp ...
Primary current: 5 A
Voltage: 50, 0.8 V
Operating temperature: -40 °C - 125 °C
... cycles - ≥500 Contacts Material - copper alloy Surface - hard-silver plated hard-gold plated Contact resistance - ≤3mΩ Crimp terminal - -mm2 - 0.09-0.82mm2 -AWG - 28-18
Primary current: 5, 10, 40 A
Voltage: 50, 250, 630 V
Operating temperature: -40 °C - 125 °C
... - ≥500 Contacts Material - copper alloy Surface - hard-silver plated hard-gold plated Contact resistance - ≤3mΩ/1mΩ Crimp terminal - ---mm² - 0.09-0.52mm²/0.14-2.5mm²/1.5-6mm² ---AWG - 28-20/26-14/16-10 Stripping ...
Impedance: 50 Ohm
Voltage: 1,500, 1,000 V
Operating temperature: -45 °C - 125 °C
Micro RF Coaxial Connectors are one kind of screw-coupling middle-power coaxial connector up to 11GHZ and some versions can be extended to 18GHZ. Micro RF Coaxial Connectors have great ...
Pitch: 0.8, 1.25 mm
Adam Tech multiple pitch Headers and Housings are a matched set of Crimp Wire Housings and PCB mounted Shrouded Headers available in Straight, Right Angle or SMT orientation. Available pitches are .031”, .039”, .047”, ...
Primary current: 1.5 A - 30 A
Voltage: 0.6 kV - 2.4 kV
Operating temperature: -55 °C - 250 °C
... options • IP50 • Insulation resistance: 101202 • Shielding: >75dB at 10Mhz >40dB at 1Ghz • 4 Sizes • Solder, print & crimp contacts • For cable o 1.4 to 9.9 mm • Durability: >5,000 cycles Series 00, Style Free ...
Primary current: 1.5 A - 30 A
Voltage: 0.6 V - 2.4 V
Operating temperature: -55 °C - 250 °C
... IP66/68 (when mated) • Insulation resistance: 10120 • Shielding: >95dB at 10Mhz >80dB at 1Ghz • 3 sizes • Solder, print & crimp contacts • For cable o 1.0 to 8.5 mm • Durability: >5,000 cycles Series 0K, Style ...
Primary current: 1.5 A - 30 A
Voltage: 0.6 kV - 2.4 kV
Operating temperature: -55 °C - 250 °C
... • 2 to 6 contacts • Insulation resistance: 10120 • Shielding: >75dB at 10Mhz >40dB at 1Ghz • 1 size • Solder, print & crimp contacts • For cable o 1.3 to 4.4 mm • Durability: >5,000 cycles Series 0S, Style ...
Primary current: 30 A
Voltage: 500 V
... bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to ...
ITT Cannon
Primary current: 245 A
Voltage: 50 V
Product Description This circular metal bayonet connector series uses plastic insulators and stamped contacts. Optimized for automated high volume production and adaptable to UL applications. Using CA Bayonet as a basis ...
ITT Cannon
Primary current: 225 A - 950 A
Voltage: 50 V
... Description CGE products are the military standard for high power / low voltage applications as e.g. starter systems. These connectors provide a robust bayonet coupling mechanism, currents up to 950A and VG96929 approval.
ITT Cannon
Primary current: 0.5 A
Voltage: 48 V
... 8 pins ■ For Data Transmission up to 10Gbps, CAT 6a ■ Easy field assembly cable type available ■ Solder/ dip-solder PCB/Crimp connection ■ Excellent EMC shielding ■ Degree of protection IP67 ■ Customer specific ...
Primary current: 0.5 A
Voltage: 48 V
Data rate: 10 GB/s
... 8 pins ■ For Data Transmission up to 10Gbps, CAT 6a ■ Easy field assembly cable type available ■ Solder/ dip-solder PCB/Crimp connection ■ Excellent EMC shielding ■ Degree of protection IP67 ■ Customer specific ...
Primary current: 0.5 A
Voltage: 50 V
Data rate: 10 GB/s
... Solder/ dip-solder PCB/Crimp connection ■ Excellent EMC shielding ■ Degree of protection IP67 ■ Customer specific assemblies and single wire lengths available Description Your Benefits -Easy PCB assembly: one-piece ...
Operating temperature: -40 °C - 80 °C
... -free assembly Reusable up to 5 times Supporting outer cable dimensions from 5.5 mm up to 7.1 mm For use with all Y-Con crimp plugs IP20 product family: Metal cover for high mechanical stability IP20 Lock vibration ...
Cat6A STP RJ45 Connector support 10G channel Crxconec cat 7 rj45 plugs with larger diameter 1.5mm are designed to use in the field installation, just assembly and crimp with the corresponding RJ45 ...
Impedance: 10 Ohm
Primary current: 26 A
Voltage: 3.7 kV
... Blind mating -10,000 mating cycles -Color overmolding available -Compliant with MIL-STD-810 and MIL-STD-202 -Choice of crimp, solder or PCB contacts As the Fischer UltiMate™ Series is IP68/IP69-sealed, it guarantees ...
Voltage: 50 V
... bulkheads where access to the “head” of the connector might be an issue. These connectors turn from the back and not the front. True 75 Ω design meets the stringent HDTV / DVD requirements Leading ...
two-row right-angle crimp terminal • Cable ends can be secured to the circuit board • 90 ° connection • Available with both threaded and through hole options • UNC threads available or customized to customer requirements • ...
Shenzhen In-saiL Precision Parts Co.,Ltd
... with gold-over-nickel platings. This comprehensive range of solutions is available in five or six pin configurations with crimp or solder cup terminations and includes: M55116/1 to /4 (U-229) in-line plugs. M55116/5 ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining