DIN rail I/O modules

GW1-ETH-WQ-EU is an Ethernet gateway that converts Ethernet into wireless in the Sub-1GHz band. Data from the wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or received data from computers can be sent via Ethernet.With ...

New Remote I/O modules with Hight-functional Firmware Configurable Type in the CONPROSYS M2M series Easily connect modules using the stack method. Users are able to combine I/O modules freely and connect them to the CPU module in ...

DIO-0404LY-WQ-EU is a digital I/O terminal that sends I/O digital signals wirelessly in the Sub-1GHz band. *1 Data is sent to Ethernet gateway (Master) of the Wireless I/O series (GW1-ETH-WQ-EU). With strength against obstacles, capability ...

The SmarWire-DT connection is well known for its flexibility. This highly remarkable connection technology permits installation at any location in the control panel. One of the best features of this great technology is situating the input/output ...

The KE modules series offers a maximum of 4 inputs and 4 outputs on a device only 22.5 mm wide, saving space on the DIN mounting rail in the control cabinet. Colored removable terminals and labeling make connection safe and easy.

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors and actors.

This uses two wires for eight digital I/O. It has six inputs and two outputs with many functions plus two frequency inputs and an RS 485 Modbus RTU. It also uses outputs with not and hold functions.

The DIN Rail mounting offers two isolated inputs. It has two independent channels acquisition module and four freely addressable outputs.

This unit manages four temperature channels with PT100 and PT1000 inputs and mV or thermocouple inputs. It uses two threshold alarms and a loop-back feature plus a double RJ45 connector and an RS485 Modbus RTU.

- USB 3.0 SuperSpeed - Daisy chainable by built in USB hub - 16-ch digital input and 16-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and ...

- USB 3.0 SuperSpeed - Daisy chainable by built in USB hub - 32-ch digital input and 32-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and ...

- Suitable for EtherCAT networks - 8-ch, 16-bit analog input channels with 2,500 VDC isolation - ±275 V high common-mode voltage range - Quick removable European type connector - Supports EtherCAT Distributed Clock ...

The digital IOs are optimized for fast detection of digital signals and switching of actuators and can be operated directly on a control or decentralized via a bus coupler. Modules are available with a granularity of 8 and 16 for inputs ...

The KeConnect communication modules enable customized communication to a wide range of communication partners through back-to-back modules and plug-in cards. Simple wiring is ensured through standard plugs. Support of a wide range ...

Kuhnke's FIO is a system of I/O modules for interconnecting the process signals in an EtherCAT network. It consists of the bus coupler and a range of I/O modules. The bus coupler converts the physical transfer technology (twisted pair) ...

The Kuhnke FIO relay module from Kendrion has 8 relays with separated contacts. The relay contact is available for voltages up to 24 V AC or DC and can be used universally for switching devices requiring mains power. The relay output ...

The Kuhnke FIO is a Bus Terminal EtherCAT® designed to connect the operation signals within the EtherCAT network. It comprises of different I/O modules and a bus coupler. The Kuhnke FIO bus coupler changes the transmission physics from ...

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...

The ECX DIO8 EtherCAT Digital Input-Output Module from ESD is engineered with 8 digital I/O's which are rated at 24 V. The unit may be powered through the use of an InRailBus or a separate power feed that is coursed through a Combicon ...

The CAN-CBX-DIO8 Model is a CANopen® Module with InRailBus. It is built with 8 digital I/Os, 24 V input voltage, 24 V output voltage, 1 A maximum output current, and DIN-EN carrier rail mounting. The system also includes easy control ...

The esd CAN-CBX-AI420 CANopen® module features InRailBus technology, 4 analog Sigma-Delta A/D converter inputs, 20 bit resolution, input voltage of ±10 V, 3-lead connection cabinet wiring offering easy control, isolated analog inputs, ...

The 415U-2-C extends communications to sensors in local, remote, and difficult-to-reach locations. Designed with the Condor series long-range, high data speed wireless transceiver and standards-based native Ethernet protocol over the ...

The ELPRO 105U-L and 905U-L products are a small I/O count transmitter and receiver pair delivered pre-configured for ease of installation. The L series products may be reconfigured into a wider ELPRO I/O or gateway network as application ...

The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example ...

The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. 29 I/Os, some ...

The BACnet module BMT-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via BACnet MS/TP protocol. 29 I/Os, ...

Features Universal power supply: 20 to 250 Vac and 20 to 250 Vdc Process input: (TPIv400/450) (pCv3012/3212) ±100mV, ±1V, ±10V, ±270V, ±20mA Universal input: (TPIv401/451)(pCv3011/3211) ±100mV, ±1V, ±10V, ±270V, ±20mA, Pt100, Ni 100 (2, ...

Features Universal power supply: 20 to 250 Vac and 20 to 250 Vdc Process input: (TPIv400/450) (pCv3012/3212) ±100mV, ±1V, ±10V, ±270V, ±20mA Universal input: (TPIv401/451)(pCv3011/3211) ±100mV, ±1V, ±10V, ±270V, ±20mA, Pt100, Ni 100 (2, ...

I/O slave module with 16 analogue inputs 16 analogue inputs for processing analogue standard signals (current, voltage, temperature, resistance) Robust design for harsh environments Ideal for use in shipbuilding thanks to approvals ...

I/O module with 24 digital, 8 universal inputs and outputs Robust design for harsh environments Can be used flexibly thanks to signal boards that can be integrated Ideal for use in shipbuilding thanks to approvals from classification societies

Robust CPU I/O master module with powerful 32-bit processor Controls up to 16 I/O slave modules Robust design for harsh environments (shipbuilding approvals) Integrated web server for user-friendly configuration and web-based visualisation IEC ...

General characteristics 2 inputs (electrically isolated from the backplane bus) 24 VDC input voltage Can accommodate two-wire proximity sensors 2 outputs (electrically isolated from the backplane bus) 24 VDC output voltage Output ...

General characteristics 8 inputs (electrically isolated from the backplane bus) 24 VDC input voltage Can accommodate two-wire proximity sensors 8 outputs (electrically isolated from the backplane bus) 24 VDC output voltage Output ...

General characteristics 4 analog outputs (electrically isolated from the backplane bus) 4 process output words (8 bytes) Output range of ±10 V, 010 V, 15 V Resolution of 12 bits + sign Substitute value functionality Diagnostic messages ...

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

The DAT3130 manufactured by DATEXEl is a distributed I/O module that is specially engineered to achieve a maximum of four digital inputs and can drive four relay outputs. This module makes use of a MODBUS RTU/ASCII protocol on RS_485 ...

The DAT 3140 device s specially designed to acquire up to 4 digital inputs and to drive up to 8 transistor outputs. The MODBUS RTU protocol transmits the data values on the RS-485 network. Two Watch-Dog timer alarms are included for safe ...

The module MU110-24.1TD is a 1-channel input module for resistor bridges (strain gauge). The module enables the direct connection of a resistor measurement bridge. The module requires 24 V DC power supply and supports Modbus RTU/ASCII ...

The digital output I/O-Module MU110-24.8D.4R has 8 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 4 digital outputs (relay) available. The module requires 24 V DC power supply and supports ...

A new modular and compact solution is now available in order to expand the on-board I/Os of the controller. It’s based on industrial fieldbus. Its architecture avoids the use of the power supply modules and end modules, making the wiring ...

The MX4 expansion module provides temperature and frequency input capability to the C4/CPC4 generation of FW Murphy Controllers using CAN proprietary communication. Serial RS-232 or RS-485 ports also provide other communication methods ...

SmartStix I/O is a terminal-block style I/O that connects to CsCAN, Profibus or Devicenet Networks. DIN-rail Mounted, with Removable Terminal Strip - SmartStix I/O is extremely compact, providing 16 and 32 point digital I/O in a package ...

8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ...

16 Digital Inputs and a RS485 Gateway Port Monitor any input from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ASCII or industry standard Modbus ...

16 Digital Digital Outputs and a RS485 Gateway Port Control any output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ASCII or industry ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

The digital input/output modules are used as a signal connection for the safety peripherals. The connection of all standard sensors provides maximum flexibility. The integrated fast shut-off function reduces the reaction times of the ...

In- and output card with timestamp function The IO 011S mixed module from the S-DIAS series is a true multi-talent with 14 digital in- and outputs as well as two analog inputs. Since the intelligent IO 011S preprocesses signals, switch ...

VIPA SLIO Modules Modular Construction for Quick Assembly Compact: 12.9 mm X 109 mm x 76.5 mm (W X D X H) Standardized: Direct mounting on 35 mm standard profile rail Extendable: Easy to expand as needed. Add up to 64 ...