... Input delay: 0.5 ms For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Digital Inputs Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.7 mA at +24 V Input delay ...
... Unit that converts 1 CH of IO-Link ports in IO-Link Master to 16-point of digital I/O Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master UR Series. Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once. Digital ...
... Overview
DomBus32 is a DIN-RAIL module (54 mm wide) with 3 relay outputs, 3 AC inputs and 5 programmable low-voltage I/Os. Available in two firmware/protocol variants: proprietary DomBus protocol (multi-master with DCMD commands and Domoticz ...
... Overview
The iUSB modules are compact, industrial-grade intelligent I/O systems for measurement, control, regulation and monitoring tasks. Typical applications include industrial automation, laboratory and test automation, process control (MSR), ...
... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar RS-485 Modbus RTU, ...
ADTEK Electronics Co., Ltd
FD-16M Modbus Modular I / O module has designed from a different perspective to automation systems. The FD-16M hardware modular design allows you to solve both your systems in a cost-effective way and to design them in such a way that there are no spare ...
The I/O systems are used in centralized or decentralized expansion for control and regulation tasks. Up to 63 slave modules can be connected to one master. The cabling is carried out quickly and safely via CAT cables. Master and slave modules can be physically ...
... 4 Fully Isolated Analog I/O Channels, Modbus RTU Processing of 4 industrial standard signals individually configurable as current or voltage signal 4 galvanic isolated I/O ports protection against erroneous measurements due to parasitic ...
Interra Ethernet I/O module is a versatile device that allows a variety of configurations and provides cost-efficient automation for smart home applications. The Ethernet module is intended to cover several automation requirements in a smart building ...
... The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...
PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet is based on Ethernet, ...
Sentinel Electronics
... Modbus-TCP Comunications allow the extention of the system through a Prometheus2 I/O unit, An integrated Web Server extends the use of the user interface through network . Extra interfaces include CAN Bus communications (Inverters, extra I/O). Prometheus2 ...
... Product Code: RS485-RS232 Safe Load Controller Ray Tipi-RS485-RS232-220 W-Input-2 Role ...
... Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input 4x analogie output, 0…2/5/10/±10 V, 0…5 mA, 0/4…20 ...
... I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 is an IO analog module ...
4neXt
IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...
IMO Precision Controls Limited
The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done with a flip of ...
AMiT, spol. s r.o.
... 16-channel Isolated Digital I/O Module with Timer Main Features - Channels: 16 - I/O Type: 12DI/2DO/2 Timer - Digital Input: Dry Contact: Logic Level 0: GND Logic Level 1: Open Wet Contact: Logic Level 0: +3V (max) Logic Level ...
Beijing Gemotech Intelligent Technology Co., Ltd.
... IBM Bluemix Ready Analog Input Remote I/O Module Remote analog input module with web RESTful API and MQTT 1 x 10/100Mbps Ethernet port 8 x 16-bit A/D Isolation up to 2500Vrms 1 x relay output Form A or form B relay with contact rating 30VDC@1A ...
NovaTech Orion I/O™ is an extension of the family of Orion Automation Platforms for substation automation and incorporates the same security features, software tools, and NCD configuration as the OrionLX+, OrionLXm, OrionMX, and OrionSX. It is a rack, ...
... Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● Support standard ...
Protech Systems
The IA-2116-U is a tiny and intelligent 16 Relays module, powered and controlled by any USB port. The IA-2116-U provides both NO and NC (Normally Open and Normally Close) channels, while the relays common line is shared between 8 or 16 relays, to ease ...
Intelligent-Appliance
... > Inputs: 8 PNP, 24V 20mA > Outputs: 4 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, ...
ELCO Elettronica di A. Ligabue e C. snc
... Distributed units are I/O peripherals specialized in a single function Connected to the Z-Link bus via optical fiber Enclosed in a IP20 stainless steel container Mounting on DIN. EN 50022 rails (Omega rails) Maximum distance between ...
D.Electron
... Power-Supply 9..24 V DC Size 35 x 68 x 82 mm (W x H x T), equals 2 TE Ethernet LAN port TFTP firmware update The LyconSys I/O modules are the optimal solution for controlling analog and digital I/O signals in a network. Our I/O modules are particularly ...
... • supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output relay ...
The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A @ 24 VDC ...
... Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 - ...
... The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and 4 digital inputs ...
Data-Control PC
... The “TES” modules are Slave Modbus Remote Output Terminals on a RS485 network. Their implementation is very fast with the TESIS workbench. Numerous internal functions are pre-programmed, The Modbus communication mapping is predefined. Designed ...
The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ethernet and ...
Taiwan Pulse Motion
... FEATURES - 16 optocoupler inputs (3..32V) - 16 semiconductor switches with high-side drivers (5..32V) - 2 counters (32 bit) for pulse, incremental encoder, or pulse-time measurement - supply 7..32V (external) or 5V (internal) - USB 2.0, full-speed - ...
... Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point or 30VDC 5A per ...
Beijing Tengcon Technology Co.,Ltd.
... -Ethernet 10/100 RJ45 connector for interfacing to CPU or network -48 or 24 channel high-current TTL digital I/O lines -Compatible with industry standard I/O racks such as Grayhill, Opto 22, Western Reserve Controls, etc. -Eight-bit ...
ACCES I/O Products, Inc.
I/O remote extension modules can provide customers with more choices and more topology.
... The NA2000 digital output expansion module can be used to connect devices such as solenoid valves, contactors, low-power motors, lights, and motor starters. Technical performance index Up to 16 output channels. The output mode is a transistor ...
Nanda Automation Technology Jiangsu Co., Ltd.
The module has a compact aluminium housing and offers the possibility for top hat rail mounting. The interfaces are quickly and conveniently available on the front panel. Using the 3-wire connection technology, all sensors can be connected directly ...
... Etherent Remote IO Module(4DIN+4AIN+2AO+4DO) M100T Ethernet Remote I/O Module provides 4 optical-isolated digital inputs, supports Max. 700KMHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal,2 ...
King Pigeon Communication Co.,Limited
the best suppliers