- Hydraulics - Pneumatics >
- Valve >
- EPDM valve
EPDM valves
DN: 40 mm - 600 mm
Pressure: 10, 16 bar
OS&Y gate valves F4-F5 DN40-500 Outside Screw & Yoke Gate valve DN: 40-600 PN: 10/16 Face to face: F4 and F5 Body: GGG-50 Bonnet: GGG-50 Wedge: EPDM/NBR Stem: AISI-420 Visual ...
Belgicast
DN: 50 mm - 150 mm
Pressure: 16 bar
Temperature: -10 °C - 140 °C
... ANSI 150 flanges. Shut-off and regulation flanged valve – focus on: 1. Internal and external epoxy coating, high temperature resistance, environmentally-friendly water based paint. 2. The shutter with EPDM ...
DN: 20 mm - 63 mm
Pressure: 10 bar
... of PTFE tape recommended for threads sealing. Technical features • Polypropylene compression nut. • HDPE seats. • EPDM O rings. • Dimensions complying with EN ISO 1452 : Plastics piping systems for water supply ...
DN: 2 in - 12 in
Pressure: 14, 24, 16, 21 bar
... and FM Approved •Valves can be easily fitted with OS&Y Tamper switch HD ductile iron Gate Valves are available as OS&Y Type with rising stem and as NRS type with non-rising stem. Gate valves ...
DN: 50 mm - 600 mm
Pressure: 1.6, 2.5, 4 bar
Pressure Relief Valve Body: Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel Diaphragm: EPDM , NBR Disc: Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel Pilot Valve: ...
Valvesonly Europe
DN: 50 mm - 200 mm
Pressure: 6, 10 bar
WAFER BUTTERFLY VALVE WITH CAST IRON BODY AND DISC, EPDM SEAT - MANUAL HANDLE Wafer type butterfly valve - ACS certified (potable water) - Body in GG25 epoxy coated - Disc in GGG40 epoxy ...
TUNING Fluid Solutions SARL
DN: 50 mm - 400 mm
Pressure: 0 bar - 20.7 bar
... approximately 50% less than conventional cast iron valves, which allows easier handling on site and reduced shipping costs. The fully encapsulated EPDM ductile iron Wedge ensures bubble-tight sealing. ...
Concentric Wafer Type Butterfly Valve The structural feature of the concentric butterfly valve is the stem center, the center of the disc, and the center of the valve body at the same ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 200 mm
... PPG,PVDF,CPVC Disc:UPVC,PP,PPG,PVDF,CPVC Stem:SUS410(standard),SUS316,SUS304 Seat:EPDM,VITON,NBR,HYPALON O-Ring:EPDM,VITON(FPM) Size: DN50(2")-DN200(8") ...
Shie Yu Machine Parts Industrial Co., Ltd.
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... flanges: PN10/16, starting from DN200 - PN10, PN16 body and bonnet: ductile iron EN-GJS-500-7 wedge: ductile iron EN-GJS-500-7, EPDM coating stem: stainless steel AISI420 coating: powder epoxy coating at least 250 ...
BLUCAST
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 130 °C
... an EPDM seat. Its narrow design allows the valve to be easily installed unlike other larger valves. It allows operating at temperatures ranging from -35ºC / 130ºC. We have the KTN 266IE ...
KTN
DN: 50 mm - 300 mm
SYLAX® WAFER STYLE SERIES 149GA Body: Cast Iron Disc: 316 Stainless Steel Seat Liner: EPDM
DN: 29 mm - 155 mm
Pressure: 18, 8, 25 bar
Temperature: -5 °C - 110 °C
... an arrow Threaded end connections: • Standard female according to UNI ISO 228/1. Special executions: • EPDM seal. All the valves comply with the regulation 97/23/CE and are tested 100% on ...
EFFEBI
DN: 3 in - 24 in
... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional ...
DN: 0.5 in - 12 in
Pressure: 110 psi
Temperature: 200 °F
... sanitary high performance 316 butterfly valve series stand above others in the sanitary and fine chemical fields. The valves incorporated an advanced design with characteristics unseen in other valves. ...
Valtorc
DN: 50 mm - 600 mm
Pressure: 1 bar - 1.6 bar
Temperature: -29 °C - 120 °C
F2 series are lined with rubber while F3 series are lined with PTFE. Selection of lining butterfly valve should first be based on the nature of the medium to determine the type of lining material, ...
Wuxi Smart Auto-control Engineering Co., Ltd.
... Seal - EPDM+PTFE standard.silicone,EPDM optional Suface treatment - ID Ra<0.4μm.OD sand blasted Connection - BPE long type welded,tri clamp end. threaded Operation - Manual,stainless steel actuated,aluminum ...
DN: 50 mm - 600 mm
Pressure: 25, 16, 20 bar
Temperature: -10 °C - 150 °C
Valve Standard: Comply with EN593/BS5155/MSS SP-67. Working Pressure and Temperature Size 50 to 600, working pressure PN16/Class125. Size 50 to 300, working pressure PN20/Class150. Size 50 to 300, working pressure PN25/Class250. Température ...
Qingdao Junzheng Machinery Manufacture Co., Ltd.
DN: 100 mm
Pressure: 16, 6, 10 bar
Temperature: -10 °C - 120 °C
Butterfly valves are primarily used in energy generation and distribution. Typical applications are if an additional boiler needs to be connected, or for the switching over of storage tank charging. Siemens recommends ...
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -40 °C - 175 °C
... diaphragm valve is available for pneumatic operation or for manual operation. For pneumatic operation, the valves are controlled by actuators that operate at product pressures of up to 10 bar, depending ...
DN: 0.125 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... chemicals Product Code - 23003403033 Name - Trio Tech Valve Size Units - Inch Material - PP+GF Thread Type - BSPT Thread Size - 1/8" O Ring Material - EPDM
Valve cylinder. Emergency Kit half mask. Bag in synthetic resin housing. Buzzer manually operated to call for help. The cylinder valve is available both with conical threading for both steel cylinders ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining