Flap valves

Pressure: 300 bar

Check Valves For a wide selection of direct- and pilot-operated check valves, engineers look to Eaton for a variety of cartridge and in-line hydraulic products. Eaton covers everything from simple, cost-saving ...

Pressure: 414 bar
Temperature: -184 °C - 232 °C

These inline valves allow free flow in only one direction, prevent backflow, and meet the industry's need for higher operating pressures. They also are used for relief and by-pass functions; however, they should not be ...

DN: 15 mm - 200 mm
Pressure: 0.1 bar

... and corrosion. For those applications requiring a higher flow capacity, Atomac check valve type ARV/SG should be considered. Universal Application The Atomac check valve can be installed either vertically ...

DN: 0.25 in - 2 in

... forged steel check valves are adapted to special service conditions at cryogenic temperatures. ADDITIONAL DESIGN FEATURES: ● Extended bonnets with sufficient gas column length, usually specified by customer, are supplied ...

Pressure: 450 psi

... compressor in-tank check valves. One-piece brass bodies, stainless steel springs, and glass-filled fluoropolymer poppets all add up to long term reliability, while the eight discharge holes insure quiet operation. ...

DN: 20 mm - 150 mm

quick-installment check valve Operating Principle Technical Parameter Installing Dimension Documents Downloads 1.Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...

DN: 15 mm - 1,200 mm
Pressure: 1,000,000 Pa - 42,000,000 Pa
Temperature: 196 °C - 540 °C

... Product Description Swing check valve also known as one-way valve or check valve, its role is to prevent the media flows back in the pipeline. Opening and closing parts by the power ...

... -Syphon Check Valves(Injection Valve) Prevents overfeeding and siphoning phenomenon. Also has a check valve function. This accessory not only prevents the overfeeding phenomenon ...

DN: 50 mm - 250 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 150 °C

The valves in Series 05 are check valves with cast iron bodies, that are manufactured in accordance with the most severe product norms, and in conformity with the quality requirements of EN ISO 9001. They ...

Pressure: 2 bar - 8 bar
Temperature: -20 °C - 200 °C

Non-return valves series Areas of application : compressed air Technical features : - working pressure : 2 ÷ 8 bar - opening pressure : 0.5 bar - working temperature : -15°C ÷ 200°C Materials : - body in ...

DN: 50 mm - 300 mm
Pressure: 10 bar
Temperature: -10 °C - 80 °C

Execution: epoxy coated lifting device Materials: body and cover: GJL-250/GJS-500-7 flap seat: soft sealing Flange connection: / Face-to-face: DIN EN 1092-2 Form B Face-to-face DIN EN 558-1 PN 10 in DN 50 ...

DN: 0.125 in
Pressure: 207 bar
Temperature: -23 °C - 190 °C

316 SS, CV Series Check Valve, 1/8" Tube Fitting, Fluorocarbon FKM O-Ring, 3000psig(207bar), -10°F to 375°F(-23°C to 190°C), Fixed Cracking Pressure 1/3psig(0.02bar) Body Material316 Stainless Steel Port 1 TypeFractional ...

DN: 0.375 in - 4 in
Pressure: 25, 16, 10 bar
Temperature: -10 °C - 90 °C

Stainless Steel spring NBR seal Female/Female : ISO 228-1

DN: 6.35 mm - 19.05 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C

... function as e.g. load holding or part of sequence valves. Typical application are systems for agricultural or industrial machineries DESCRIPTION The VUI series’ valves are unidirectional valves ...

DN: 200, 150, 100, 80 mm
Pressure: 17.5 bar

HD Alarm Valve acts as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. It is used to actuate a fire alarm during flow of water from the ...

DN: 50 mm - 800 mm
Pressure: 1.6 MPa - 16 MPa
Temperature: -196 °C - 550 °C

H44H/W swing check valve is designed and manufactured strictly according to GB12236 standard. The pin shaft is connected with the valve dise with the built-in structure, with excellent performance and ...

Pressure: 250 bar
Temperature: -40 °C - 120 °C
Flow rate: 19 l/min

Specifications · Operating Pressure：250BAR · Flow：19L/min · Internal Leakage：3drop/min.max.at operating pressure · Temperature：-40°C to +120°(-40°F to+250°F) · Cavity：08-2 · FluidsMineral-based fluids with ...

DISC CHECK VALVE: -Compact design -Light and weight -Size(NB)-15,20,25,40,50,80,100

DN: 15 mm - 250 mm
Pressure: 10, 16, 20 bar

... in search of optimum quality Check Valves? If yes, then you have landed at right place. Our company is actively engaged in manufacturing, exporting and supplying of Non Slam Disc Check Valve in India. ...

DN: 50 mm - 900 mm
Pressure: 150 bar - 2,500 bar

Dual Disc Lug Type Check Valve Body Material: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Aluminium Bronze Disc: Ductile Iron, Stainless Steel, Aluminium Bronze Spring: Stainless Steel Stem: Stainless ...

DN: 15 mm - 100 mm
Pressure: 150 bar
Temperature: 300 °C

Single Disc Non-slam Check Valve. Complete SS construction. A351 Gr. CF8M End conns.: Wafer type - for fitment between flanges

DN: 12.7 mm
Pressure: 420 bar
Temperature: -30 °C - 110 °C

A screw-in, cartridge style, direct acting, poppet type check valve. Main use is as a blocking or load-holding device. The CVC5.S08 allows flow passage from port 1 to 2: the cartridge has a fully guided check which ...

DN: 5, 5.5, 4.6, 5.8 mm
Pressure: 0.1 bar - 10 bar
Flow rate: 8.6 l/min - 34 l/min

Directional flow control Cleaning, washing and degreasing systems Foot valves Mixing of detergent solutions Stainless steel and PVC non-return valves POM (Delrin) Venturi tube fluid mixers The ...

DN: 0.25, 0.375, 1, 0.5, 0.75 in
Pressure: 0 psi - 100,000 psi
Temperature: -251 °C - 648 °C

Prevents reverse flow which may cause damage to a pressure system Metal Seat offers metal-to-metal seat for rapid cycling or severe environments Soft Seat offers PEEK seat with metal back-up for fast shutoff and reliable ...

DN: 4, 6, 8, 10, 12 in
Pressure: 12 bar
Temperature: -10 °C - 82 °C

... Door Check Valve is a wafered,double door swing type check valve thatallows water flow in one direction only.A hinged clapper remains open with waterflowing in one direction, and automaticallycloses when ...