Flap valves

DN: 5, 5.5, 4.6, 5.8 mm
Pressure: 0.1 bar - 10 bar
Flow rate: 8.6 l/min - 34 l/min

Directional flow control Cleaning, washing and degreasing systems Foot valves Mixing of detergent solutions Stainless steel and PVC non-return valves POM (Delrin) Venturi tube fluid mixers The ...

DN: 0.25, 0.375, 1, 0.5, 0.75 in
Pressure: 0 psi - 100,000 psi
Temperature: -251 °C - 648 °C

Prevents reverse flow which may cause damage to a pressure system Metal Seat offers metal-to-metal seat for rapid cycling or severe environments Soft Seat offers PEEK seat with metal back-up for fast shutoff and reliable ...

DN: 0.5, 0.75 in
Pressure: 10 bar - 200 bar

... by Doa, is a hydraulic valve, intended for the control of flow and pressure. This tool operates with the use of an output line, manipulated by two cartridges- one for the flow and one for the pressure. This Doa hydraulic ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -20 °C - 200 °C

3-pcs. investment cast check valve in stainless steel with spring. Mounting in all directions. FDA

Pressure: 45 bar - 55 bar
Temperature: -29 °C - 191 °C

... flow and minimal pressure drop Hermetically sealed copper body Optimised seat material with an elastomer coated valve plate Safe working pressures up to 55 Bar (R410A compatible) Multi orientation ...

Pressure: 0.3 bar - 5 bar

... a fully mechanical device that utilizes a spring system to keep the valve open for continual gas stream flow. In the event of a break in the polyethylene tube connected to the valve, the increased gas ...

DN: 0.125 in - 1 in
Pressure: 800, 3,000 psi
Temperature: -40 °C - 204 °C

Price can't be beat! The H6200 series is our most economical check valve designed for low pressure applications H6200-1MM 1/8" MNPT x 1/8" MNPT Max Pressure 3000 psi Orifice Size .140 Flow Coefficient: Cv: Consult ...

DN: 65 mm - 200 mm
Pressure: 20.7 bar

... public water supplies. The AV-1-300 Alarm Check Valve Trim includes pressure gauges to monitor system pressure conditions, a bypass check valve, a main drain valve, and an alarm test ...

DN: 15 mm - 1,000 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 180 °C

Temperature: -10 °C - 70 °C

PNEUMATIC PILOT CHECK VALVE Pneumatic Pilot Check Valve -XHNotion can offer you pneumatic pilot check valve, it placed on the cylinder to help locate the place. FEATURES Maintaining ...

DN: 25 mm - 200 mm

Model No.: JW300-Flanged Body Material:UPVC,PP,CPVC,PPG,PVDF Bonnet:UPVC,CPVC,PPG,PVDF Disc:UPVC,PP,CPVC,PPG,PVDF O-Ring:EPDM,VITON Size: DN25(1")~DN200(8") Standard: JIS,ANSI,DIN

DN: 0.5, 0.75, 1 in

Paani Precisions is one of the most renowned Brass Non Return Valve Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, we also see to ...

DN: 0.25 in - 2 in

Valves by Velo Acciai include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Technical features Sizes of ball ...

DN: 50 mm - 400 mm
Pressure: 240 psi

Technical characteristics: body, bonnet: ductile iron EN-GJS-500-7 ball float: EPDM/alluminium gasket: EPDM bolts, washers: carbon steel/stainless steel A304 working pressure PN16 flanges drilled acc. PN10/16, starting from DN200 ...

DN: 8 mm - 150 mm
Pressure: 150 psi - 235 psi
Temperature: 70 °F

Hayward's TC True Union Check Valves are available in PVC, CPVC, and PP and seats are FPM or EPDM. They are all put together with lubricant that has no silicone. They feature 1/2 in. to 6 in. are Sure Block layout, seats ...

DN: 10 mm - 50 mm
Pressure: 0 bar - 160 bar
Temperature: 0 °C - 550 °C

Standard features Straight bonnet Die-forged valve body and bonnet Shut-off disc, Fig. No. 200 AE Throttle disc, Fig. No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure ...

DN: 2 in - 12 in
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 180 °C

TECHNICAL INFORMATION1. Wafer check valve (double disk)2. Made of stainless steel CF8M3. Disk made of CF8M4. Axle and spring made of AISI 3165. Seat of viton (FKM) vulcanised in groove6. Assembly between flanges DIN EN ...

This product can be attached between the cup and the mounted arm. It ensures the rest of the cups' efficiency when the enclosed vaccum cups loosen their attachment, using its automatic close function.

DN: 150 mm - 4,500 mm

ANSI FLANGES CHECK VALVE Cl.150-300 Description •Standard: API 602 y ANSI B16.34 •Face to face dimension: ANSI B16.10. Flange dimension •Test: API 598. •Construction: B.C&W.C. •Seal: Acero inoxidable + grafito •Body: ...

DN: 80 mm - 1,000 mm
Pressure: 10 bar - 40 bar

... for the last two decades. Another benefit of the valve is the variety of features. Beside the non-return function the valve can be used as a combined check and isolating valve or ...

Pressure: 0 psi - 3,000 psi

... check valve. It is designed and engineered to facilitate a wide range of applications including but not limited to chemical processes gas industry, aerospace and hydraulic to name a few. This is a highly-functional ...

DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C

... DESCRIPTION Uni-directional valve with exclusive double sealing system: a metal ball against the O-Ring ensures sealing at low pressure; at high pressure, the OR warps, stretches out, and the metal ball ensures sealing ...

DN: 40 mm - 150 mm
Pressure: 0.5 bar - 17 bar
Temperature: 60 °C

... beyond most other valves. This guide will asist you in the selection of the optimal DOROT Series 500 valve. Remote Control & Check Valves EL - Solenoid Controlled Valve CV ...

Pressure: 0 bar - 420 bar

... is a 2/2 way cartridge valve constructed in size 25 framework and can exhibit a maximum pressure of up to 42 MPa with flow rate of up to 400 dm3/min. This valve has a wide array of usage as it can be ...