- Hydraulics - Pneumatics >
- Valve >
- Flap valve
Flap valves
DN: 46 mm - 179 mm
Pressure: 2,000 psi - 20,000 psi
... Standard. The valve trim adopt sulfide-resistance steel and able to be used in H2S condition, valve body made by alloy steel forging with good performance. Two types of Check valves ...
DN: 50 mm - 1,500 mm
Pressure: 270 psi - 4,730 psi
Temperature: 196 °C - 593 °C
Swing check valve Product Switch valve Product description Swing check valve Model H44H/X Size 2”~60”(50mm~1500mm) Operating temperature -196℃~593℃acc ...
Beijing Valve General Factory Co., Ltd
DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 120 °C
BRASS SWING CHECK VALVE - MIHA BRAND, WITH BRASS SEAT Specification Used for water, gasoline, oil Threads standard: BS 21/ ISO 228-1-2000 Max. working pressure: 16 bar Max. working temperature: 120oC Origin: Vietnam Manufacturer: ...
Minh Hoa Investment JSC
DN: 6 mm - 10 mm
Pressure: 1.5, 12.5 bar
Use : welding and cutting Fluid : oxygen, acetylene Quick coupling : function
DN: 0.125 in - 0.5 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 130 °C
Ease of use : Easy to install Construction : Brass and nickel-plated brass Safety : for ringmains Construction Brass body Highlight Network safety
DN: 15 mm - 80 mm
Pressure: 100 mbar - 5,000 mbar
Non-return gas valve to prevent gas creepage or surge, for gas, air and oxygen. Features & Benefits: GRS: not flame-arresting GRSF: with sinter bronze flame arrester, so flame-arresting in the case of use ...
DN: 0.25 in - 4 in
Pressure: 400, 125, 175 psi
Temperature: -12 °C - 178 °C
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubble-tight shutoff and are ...
... release of the manipulated object is required • Prevents suction through the blow-off lines • Reduced feed pressure for full valve opening
DN: 10 mm - 80 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Robust spring-loaded check valve type 4000 from Schubert & Salzer in seat cone design made of stainless steel with high flow rate for aggressive media and high operating temperatures. Size: DN 10 - DN 80 ...
DN: 16 mm - 63 mm
Pressure: 420 bar
... Cartridges Valves Series CSE are passive slip-in cartridge valves similar to our CEE series, but here we have cartridge valve and cover in one valve unit. They are equipped ...
DN: 0.25 in - 1.25 in
Pressure: 0 psi - 5,000 psi
Temperature: -40 °F - 250 °F
... construction consists of a valve body with an inlet and an outlet port. Inside, a moveable poppet valve is controlled by spring pressure. In most cases the valve is normally closed, opening ...
Parker Quick Coupling Division
DN: 0.5 in
Pressure: 0 bar - 400 bar
Temperature: -10 °C - 120 °C
... pressure gauge valves per DIN 16271, the test pivot is sealed by a lens-type sealing ring and a screw cap placed on top; with valves per DIN 16272, the test pivot is separately isolated by an additional ...
Essential for nearly every fuel train, the Eclipse Disc Type Check valves prevent reverse gas or air flow in the system. Eclipse Series 1000 Disc Type Check Valves are designed to prevent reverse flow ...
DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C
Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless steel for high functional reliability and ...
BALL CHECK VALVES Ball check valves VAP, with EN 12050-4 certification, are designed for use even with soiled liquids to provide full guarantees of operation in heavy-duty working conditions. Full ...
BALL CHECK VALVES VAP ball check valves prevent backflow during plant maintenance or stoppages. They are designed for use even with soiled wastewaters to provide full guarantees of operation in heavy-duty ...
They can be installed horizontal or vertical and do not require any maintenance. All Zenit ball check valves hold certification under the EN 12050-4 standard, appendix ZA.
DN: 0.25 in
Pressure: 0 bar - 30 bar
This valve can be set from 0 till 30 BAR. It is used on the lubrication point. Key features: - Pressure: from 0 to 30 bar (adjustable) - Material: galvanized steel - Diameter port. 5 mm Elastomeric-plastic seal ...
M/F oil or grease check valve available with different threads.
DN: 0.25 in - 1 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe ball check valves for high or low pressure hydraulic circuits prevent flow reversal in a circuit or protect against overpressure that can occur in certain parts of a circuit. Unguided valves ...
DN: 0.25 in - 2 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe piston check valves prevent reverse flow in a circuit or protect against overpressure that can occur in some places of a circuit. The guided valve may or may not have a synthetic rubber ...
DN: 0.25 in - 2 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe piston check valves prevent reverse flow in a circuit or protect against overpressure that can occur in some places of a circuit. The guided valve may or may not have a synthetic rubber ...
... lifting check valve, swing check valve and butterfly check valve three kinds: 1. Lifting check valves are divided into vertical and horizontal types. 2. Swing check ...
Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses.
DN: 1.6 mm - 25 mm
Pressure: 0.5 bar - 6,300 bar
Temperature: 0 °C - 200 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 0.125, 0.25 in
Pressure: 0.2, 0.4, 0.7 bar
... dripping in car washing or other cleaning applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check ...
DN: 0.25, 0.125 in
Pressure: 0.4, 0.7 bar
... dripping in car washing or other cleaning applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check ...
Pressure: 10 bar - 70 bar
Temperature: 0 °C - 70 °C
DN: 0.25 in
... Directional Control Valves. The 1⁄4 NPT (500172) and the SAE-4 (500174) “P” port check valves are required on all single acting or double acting circuits where there is more than one directional valve ...
DN: 50 mm - 400 mm
Pressure: 16, 10 bar
The measurements of the flanges are corresponding to DIN EN 1092-2 Features Material: GJS (GGG) EWS (fusion bonded epoxy) coating Bolt: X15Cr13 Sealing: rubber
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining