DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... remove 4 screws • Box with two end of career – Electromechanical – Proximity NAMUR – PNP Proximity • Pilot Solenoid Valve 3/ 2 and 5/2 way • Robust pneumatic actuator ...
DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... diaphragm valve has the highest closing forces in the GF Pipping Systems range of pneumatically operated diaphragm valves. It is available with FC (Fail Close), FO (Fail Open), DA (Double Acting) and DA (Double Acting) ...
DN: 0.312 mm
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
... a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns ...
DN: 3 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating ...
Mass Flow ONLINE BV
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,000 °F
... This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially ...
Badger Meter
... Model SP34FC is a 1.2 gpm (4.5 L) rough chrome-plated cross with flow control for use with SP30 face spray ring. Washer and capnut are included. ...
Pressure: 0 bar - 13.6 bar
... Magna™ Flow Control Valve Series 608 Flow Control Valve For Gases or Liquids The Magna Flow Control Valve ...
DN: 80 mm - 250 mm
Pressure: 10, 8 bar
Temperature: -30 °C - 180 °C
... Wafer type butterfly valve for installation between flanges EN 1092, PN 10, one-piece body with centring lugs, end-to-end valve stem, flat disc design with excellent flow characteristics. The setting ...
DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external adjustment, which means that perfect alignment ...
Goetze KG
DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C
... the motor and electronics are integrated in the metering valve housing. The control electronics allow the position of the motor to be set via an analog voltage signal, which means that the flow rate ...
DN: 2.5, 0.75, 1.5, 0.5, 2 in
Pressure: 16, 40, 150, 300 bar
Temperature: 280, 300, 400, 238, 250 °C
... Sightglasses – GESTRA Vaposkops – or monitoring electrodes are a fixed part of the equipment. USE VK Vaposkops are valves that allow you to see flow processes in pipes. When they are installed upstream of a steam trap, ...
DN: 1.4 mm
Pressure: 0 psi - 1,000 psi
... Series PMV Precision Metering Valves are designed for accurate and repeatable flow control of fluids and gases. Valves feature a one-piece forged body and a screwed bonnet design. Stainless ...
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
... freeze protection valve can be installed in either the standard or reverse flow orientation. In standard flow orientation, the wax actuator will sense the ambient temperature to initiate flow ...
Pressure: 0 psi - 600 psi
Temperature: 110 °C
... The Seetru Air Start Valve (GS56) The Seetru GS56 is a high quality control valve designed to handle a two-stage operation for air starting of engines. Air starting is typically used for diesel engines. ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min
... Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds ...
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... degree) or 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve ...
Aalborg Instruments
Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.
DN: 0.5 in - 1.5 in
Pressure: 350 psi
Temperature: -10 °C - 120 °C
... Measuring ports on both ends enjoy good self-sealing performance. High-precision valve disc ensures correct and persistence of constant flow. Product Features Auto constant flow, field or site commissioning ...
Taloar
DN: 15 mm - 50 mm
... fluids. The Bypass valve is specifically designed to optimize the fill rate of these large vessels. By utilizing two different flow paths the process can be filled quickly with the larger valve and filled ...
DN: 3.2 mm - 4.2 mm
Pressure: 100 bar - 400 bar
... Internal Tighteness : Mini 10-3 mbar.l/s en helium ( Valve / Seat) External Tighteness : Mini 10-4 mbar.l/s en helium KV value for a pressure drop / loss ΔP = 1 bar : - Internal diameter Ø 3,2 mm : KV = 0,23 - Internal diameter Ø ...
IMF
DN: 0.5 in - 3 in
... Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body ...
Watts Water Technologies
DN: 1.813 in - 7.063 in
Pressure: 15,000, 10,000 psi
... Cameron frac valves have earned a reputation for quality and reliability. Gate valves in frac trees and manifolds frequently flow and control high-pressure, high-volume, abrasive fracturing ...
CAMERON
Pressure: 3 bar - 10 bar
... This valve has been designed to control lubricant flow (oil and grease). Piston is made of hardened and ground steel. It is driven by a pneumatic cylinder controlled by a 4-way solenoid valve. This ...
Dropsa spa
Pressure: 250 bar
Flow rate: 80 l/min
... EDF*M COMPENSATED PROPORTIONAL FLOW CONTROL VALVES Description EDF03M and EDF05M are direct operated normally closed proportional flow control valves ...
CONTINENTAL HYDRAULICS
... These valves, manufacture by ATOS, is offered in two versions. The AES servoproportional valves is used to deliver high performance operation. It is integrated with digital drivers for applications with ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... on request), manual handwheel control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, ...
Mival
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... Control ball valve to control the flow of hot and cold water and Glykol solutions (max. 50%) in HVAC systems conjunction with a rotary actuator Technical data Valve Flow ...
... AUTOMATIC CONTROL VALVES An automatic control valve regulates a flow or a pressure of a fluid without external power source, no actuator is necessary resulting both ...
FAMAT
DN: 50 mm - 200 mm
Pressure: 16, 10, 25 bar
... controlled control valve for the regulation of the pressure and flow rate in service areas with external power supply. The control characteristic can be adapted to the operating conditions ...
VAG-Group
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 210 °C
... PFA lined ball valves are used in a wide variety of applications in many industries The valves are ideally suited for corrosive applications, requiring reliable performance, tight shutoff, constant torque and no maintenance. ...
Pentair Valves & Controls
DN: 100 mm - 300 mm
Pressure: 10 bar - 25 bar
... Body: EN-JS 1050 Coating: Epoxy, Epoxy-Polymer-Ceramic (EPC) Innovative valves for secure regulation of pressure stages and flow rates. Designed as one piece Optimised flow behaviour and minimum ...
ERHARD
DN: 0.5 mm - 11 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... below lowest occurring ambient temperature. Materials Body: Al (anodized), seals: NBR This valve is used for the speed control of a pneumatic cylinder. The flow rate can br regulated by turning the ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C
... installation. The device functions to shut off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It ...
DN: 50 mm - 300 mm
Pressure: 6, 10 bar
Temperature: 10 °C - 60 °C
... • Ideally suited for flow control using minimal piping space. • 100% factory tested. • Minimal pressure drop. • Low maintenance. • Resistance to many inorganic chemicals. • Regulable opening every ...
Cepex SER
DN: 0.5 in
Pressure: 345 bar
... FR20 Reversing Valves operate in conjunction with two pressure switches, alternating lubricant flow through DC41 end-of-line systems so that lubricant is directed first to one set of Dualine valve inlet ...
DN: 2.5 mm - 250 mm
The piping direction can be set at any angle on the universal type. A Flame-resistant resin used, A sealing material coats the pipe threads. [Port size]M3, M5, R1/8 to R1/2
DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F
... Walchem’s Flow Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you ...
DN: 0.25 in
Pressure: 31.5 MPa
Temperature: -15 °C - 70 °C
... Cetop 3 (NG6) Pressure Detecting Valve – The pressure detecting valves are designed to detect pressure on the ports selected. Cetop 3 (NG6) Pressure Detecting Valve. For other products visit Products ...
DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...
Pressure: 0 bar - 250 bar
Flow rate: 0 l/min - 25 l/min
... RPCED1-*/T3 is a three-way flow control valve, pressure and temperature compensated with electric proportional control and mounting interface in compliance with ISO 6263 (CETOP RP121H) standards. — ...
Duplomatic Oleodinamica
DN: 0.25 in
Pressure: 5,000 psi
... Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow ...
the best suppliers