Gas valves

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...

DN: 15 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C

... 2/2-way ball valve with male thread Medium: Compressed air, vacuum, inert gases Material of casing: Brass nickel-plated Material of nut: Brass nickel-plated Material of seal: NBR Material of locking ring: ...

DN: 0.5 in - 8 in
Pressure: 0.5 bar

... Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar. ...

DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C

... GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic drives enables an extremely ...

DN: 40 mm - 1,200 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... more achieving friendly working. Zero leakage perfects the sealing performance especially in Gas and Air applications. Fully Lining Full EPDM lined valve interior completely isolating the line media ...

... Suitable for handling liquids, gases, and some corrosive media Ideal for industries needing a reliable and cost-effective valve solution Features : Wafer-style design for easy installation between flanges Constructed from durable brass ...

DN: 80 mm - 3,600 mm
Pressure: 75 psi - 250 psi
Temperature: 143 °C

... shaft seals are features on all DeZURIK AWWA valves. Molded-in body seat with disc locators provides positive sealing and longer seat life on sizes 3-20” (80-500mm). Large valves, 24-144” (600-3600mm), feature adjustable, ...

DN: 15 mm - 50 mm
Pressure: 800 psi

... Metal Application - Gas Fitting, Oil Fitting Color - Silver Pattern - Plain Power - Hydraulic Pressure - High, Low Features - Blow-Out-Proof, Casting Approved, Durable If you are looking for MNC 3 Piece Forged Steel Ball Valve, ...

DN: 0.75, 1 in
Pressure: 35, 42 bar
Temperature: -20 °C - 120 °C

DN: 14 mm - 85 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

... BRASS BALL VALVES Size:1/2“-4” [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal PTFE Application Water ; Gas ; Oil Working emperature ...

DN: 15, 20 mm
Pressure: 16 bar
Temperature: 120 °C

... Brass ball valve Novo • - Brass ball valve, screwed ends • - Used for water, steam, gas, petroleum • - Blue color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...

... A high-performance micro- valve ideal for handling gas analysis and control equipment, fluid precision control, etc. Micro flow rates can be adjusted with high resolution and reproducibility. Features ■Wide adjustable ...

... transferring to a keg, or ball lock disconnects for gas and for liquids. With the spunding valve, it is possible to get natural carbonation in the fermentation tank, by fermentation. Adjust the relief ...

DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C

... diagnostics of “ valve-actuator” system due to application of smart electro-pneumatic positioners high tightness of closure due to application of soft valve seats (with PTFE seals in the whole range of flows and characteristics, ...

Flow rate: 500 us gal/min

... piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal ...

... Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...

DN: 0.25 in - 4 in
Pressure: 68 bar
Temperature: 0 °C - 230 °C

... Stainless steel ball valve Elephant BV.T.Fp.316.230 986 psi, full port, threaded connection, with handle is used as shut-off valves in heat supply systems, water supply, steam, fuel systems with compressed air and neutral ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C

... AQUApipe stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm are compatible with DVGW ...

Pressure: 64, 130 bar

... • Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ASME B1.20.1, JIS ...

Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h

... changes, liquefaction of chlorine gas. GENERAL The M 3480 C gas chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady operating gas ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...

... The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") and PP3048063020 (63mm x 2"). ...

DN: 15 mm - 50 mm
Pressure: 136 bar
Temperature: -29 °C - 425 °C

... high tightness (leakproofness class A according to EN – 12266 – 1) environment friendly tests according to API 598 length of installation according to MFG standard end for welding in according to ASME B16.11 ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

... Applications: Thermal Power Plants, Gas Turbines & Gas Compressor Units, Steelworks, Refineries & Petrochemical Plants, Biogas & Landfill Gas, Pipeline & Gas Distribution ...