DN: 0.375 in
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 84 °C
... Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves ...
DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C
... Resolution Valve provides superior performance over legacy needle valves. Selection of stainless steel 316L, aluminum or PEEK body material. The high resolution electronic flow control valve The High ...
DN: 6, 8 mm
Pressure: 20 psi - 30 psi
... Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to ...
DN: 16 mm
Temperature: 0 °C - 150 °C
... any position because of their air tightness in both positions. The body is either made of solid aluminum or stainless steel (VE WIG). The stainless steel valves are tungsten inert gas welded from the ...
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator ...
DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator ...
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● ...
DN: 150 mm - 180 mm
AWF
AWF
AWF
DN: 0.25 in
Temperature: 0 °C - 120 °C
... outlet is variable. Flow Rate: Liquid: Maximum 1000 cc/min water for 1/4"NPT, bigger than it on request Gas: Maximum 50 NL/min air for 1/4"NPT; 700NL/min air for 1/2"NPT Process Connection:1/4"NPT female, ...
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. These MAXIMATOR high pressure valves with metal sealing have a high level of safety and reliability under adverse operating conditions. These valves may be employed ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
... and thus a high reliability of the valve. These MAXIMATOR high pressure valves with metal sealing have a high level of safety and reliability under adverse operating conditions. These valves may be ...
Maximator GmbH
DN: 1 in
Pressure: 0 bar - 2,965 bar
... adjusting the valve on side. The outlet check valve which is located downstream towards the vent line (stack) is integrated as well. Double porting on left hand side eliminates need for Tee fitting Connection for ...
Maximator GmbH
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
... and reduce the likelihood of vibrations causing a change in the flow rate. All of the Air Logics products are assembled and tested in America. Plastic needle valves are tested for sealing and performance. Media Gases ...
Pressure: 0 bar - 7 bar
Temperature: 10 °C - 50 °C
... robust valve designed for long life with improved sealing due to its large sealing surface. No heating of the fluid/ gas. Used for aggressive liquids or gases and single-use applications. Specifications Description Pneumatic ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...
DN: 2 in
Pressure: 4.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... > - Port: Refer below technical data sheet (Available BSP / NPT) > - Body Material: SS ASTM A351 Grade CF8 > - Seal: PTFE / VITON > - CircumstanceTemp: -10°C to 70°C > - Leakage: As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating ...
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
DN: 15 mm - 300 mm
Pressure: 0 bar - 16 bar
... Overview
The UBF Series uni-body flanged ball
valves are one-piece body
valves designed for on/off and control applications in industrial fluid systems. They offer a compact footprint and simplified installation ...
MARSVALVENOK
DN: 8 mm - 50 mm
Temperature: -20 °C - 200 °C
... specifications
- Product name: Three-piece Flanged Ball Valve
- Commercial denomination: Three-piece Flanged Ball Valve
- Category: Flanged Ball Valve
- Brand: MARS Valve
MARSVALVENOK
DN: 6.35 mm - 50.8 mm
Pressure: 0 bar - 103.4 bar
... b>Product
Two-piece ball
valve — Series F20-80.
Overview
Two-piece ball
valve designed for general industrial applications. Available with PTFE, RTFE or TFM1600 seats. Suitable for liquid and
gas ...
MARSVALVENOK
DN: 0.5 in - 1 in
Pressure: 0 bar - 19 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
DN: 0.5 in - 6 in
Pressure: 0 bar - 60 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
DN: 0.5 in - 6 in
Pressure: 0 bar - 19 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...
Hyperr Valves Private Limited
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 206.8 bar
... Pneumatic Diaphragm Valve HD Series — 316L Stainless Steel, High-Purity, High-Pressure for Laboratory Specialty Gases
Product Application and Purpose
The HD Series pneumatic diaphragm
valve provides ...
DN: 0 mm - 10,000 mm
... MANUAL DIAPHRAGM
VALVE
Overview
Manual low-pressure diaphragm
valve designed for control of high-purity and ultra-high-purity gases in semiconductor, laboratory and industrial processes. Typical applications ...
DN: 0 mm - 10,000 mm
... Ultra High Purity Diaphragm Valve
LOW PRESSURE PNEUMATIC DIAPHRAGM VALVE
Features
Body
- 316L VIM‑VAR stainless steel body material for ultrahigh‑purity applications.
- Inner
DN: 0 mm - 10,000 mm
Pressure: -1 bar - 20 bar
Flow rate: 18 l/min - 5,000 l/min
... Overview
FC Series stepper-controlled proportional needle
valves for high-precision liquid and
gas flow control. Repeatability up to ±0.1% F.S. Control inputs: 0–10V, 4–20mA or RS485. Flow rates from 18 L/min ...
... strong>
AJL Vented Cap Grease
Valve | Hard Seal High Pressure Grease
Valve | Grease Injector
Valve for Wellhead Equipment | Oil &
Gas Grease
Valve
Brief ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with standard piston Electrical ...
DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min
... ATEX 3053 X is for Explosion Group “IIB3” tested with Ethylene and compatible for all gas with MESG > 0.65 mm for example: Ammonia, Industrial methane, Blas-furnace gas, Carbon monoxide, Propane, Butane, Pentane, Esane, ...
DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C
... knife gate valves experts, Flowrates will provide the finest solutions to your process. Our extensive range of knife gate valves enables our customers to solve problems on site trough our solutions. They are available ...
Flowrates
DN: 80 mm - 1,200 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -50 °C - 220 °C
... BVD01 are characterized by unparalleled performance and quality in the range of high performance double offset butterfly valves. Optimized lip-type seat can automatically compensate for temperature and pressure variations. It has a ...
Flowrates
DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C
... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...
Flowrates
DN: 50 mm - 600 mm
Pressure: 6 bar
Flow rate: 44 m³/h - 15,900 m³/h
... ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220 More butterfly valves We have other butterfly valves in our catalog. Contact us to find out all the valves we can offer you. ...
DN: 15 mm - 50 mm
Pressure: 6 bar - 10 bar
Temperature: -40 °C - 120 °C
... To block and also regulate in industrial plants Fluids • Neutral media and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas ...
DN: 0.312 mm
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
... orifice. Unique laminar flow design ensures sensitive, repeatable control. Perfect for use in application requiring precision gas metering, and circuit speed or sequencing control. FEATURES • - 3 degree Pin Angle • - Simple Panel ...
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C
... times longer than a ball valve with with reduced maintenance costs 100% in- house manufacturing process technology Maximum control and accuracy in all the stages of the manufacturing process Less Air consumption 80% ...
OMAL Spa
DN: 3 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution Non-rotating stainless ...
Mass Flow ONLINE BV
DN: 3 mm
Pressure: 0 bar - 200 bar
... Brass control valve (e. g. for the pressure regulator outlet) For non corrosive gases and gas mixtures up to qualität 6.0 Suitable for pressures up to 50 bar (control valve) or 200 bar (shut-off- valve) Ergonomically ...
Spectron Gas Control Systems GmbH
DN: 15 mm - 100 mm
Pressure: 160 bar
... Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port cone, Mixing-/ ...
RTK Regeltechnik Kornwestheim
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -50 °C - 180 °C
... Two-piece stainless steel ball valve with screwed ends. Low pressure loss due to full and extremely smooth passage. Blow-out proof switching shafts are inserted from the inside. The ball valve does not require any maintenance ...
GEFA Processtechnik
DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... series made of highly corrosion resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external ...
Goetze KG
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
AVS Römer
DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C
... GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic drives enables an extremely ...
GESTRA AG
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
... rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an option ...
Hornung GmbH
DN: 15 mm - 400 mm
Temperature: -50 °C - 600 °C
... Metso’s Neles® high pressure ball valves equipped with well-known Metso valve technology including application based seat selection, material and coating technologies, robust bearing construction. These features ensure ...
Metso Automation
Pressure: 0 psi - 5,500 psi
... The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen ...
Generant
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once the fluid temperature ...
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
... VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic actuator. It is ...
Elettromeccanica Delta S.p.A.
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring an altogether safe, ...
Alco
... modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of all combustion gas ...
ECONEX S.R.L.
DN: 0.5 in - 2 in
Pressure: 28 bar
... brass ball valve with threaded end connections provides bubble-tight shutoff at 400 PSI. The valve's PTFE seat ring and hard chrome-plated brass ball exhibit high chemical resistance properties. The valve ...
NIBCO
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are also interchangeable ...
Aalborg Instruments
DN: 0.5 in - 4 in
Pressure: 300 psi
Temperature: -20 °C - 180 °C
... Screw-in Bonnet, Solid Wedge, Non-Rising Stem BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1 ...
Taloar
the best suppliers