DN: 40 mm - 600 mm
Pressure: 2 bar - 10 bar
Temperature: 150, 120 °C
Material Cast iron Dimensions DN40 - DN600 Connection Flange
Dansk Ventil Center A/S
DN: 15 mm - 600 mm
Temperature: -50 °C - 600 °C
Russian Standard GOST Gate Valve Z44 (30с41нж, 30с64нж, 30с15нж,30с76нж,30с45нж) Technical Specifications： (1) Design Standard: GOST 5762-2002 (2) Face to Face Dimension: GOST 3706-93 (3) End Flange ...
WENZHOU AEA VALVE CO., LTD.
Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation
DN: 50 mm - 600 mm
SUPPORTED KNIFE GATE VALVE Epoxy coated cast iron body - AISI 304 knife - Metal seat - PN10 - Handwheel
TUNING Fluid Solutions SARL
DN: 150 mm
Pressure: 1.4 bar - 16 bar
... Preaction Type B Valves automatically control the flow of water into preaction fire protection sprinkler systems upon operation of a fire detection system or operation of one or more automatic sprinklers. The Model DPV-1 ...
Total
DN: 50 mm - 1,000 mm
Pressure: 10 bar
Temperature: -40 °C - 250 °C
Also for knife gate valves you can ask Vapo Techniek BV. We supply manual operated, hydraulic, electric and pneumatic actuated.
Flanged Knife Gate Valve AFC Double Flanged knife gate valve is designed for general industrial service applications. The design of the body and seat assures non-clogging ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 0.75, 1, 1.5, 2 in
... depressurizing, venting and safe draining of piping systems. Performance is far superior when compared to conventional three valve configurations. Features/Benefits The SaVD™ Safety Seal Cap is designed to replace ...
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... position switches •Space heater, space heater's thermal swich •Mechanical connection (lange F10, IS05210 •Manual control. •Gâte valve design standards: DIN3352, (ace to (ace dimensions DIN3302 F4, ...
BLUCAST
DN: 200 mm - 250 mm
Pressure: 10 bar - 40 bar
Standard features Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ Die-forged body and bonnet Full bore Outside screw and yoke Non-turning rising stem Yoke sleeve Available with flange and buttweld ends Optional standard ...
Stahl-Armaturen PERSTA
... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...
DN: 100, 125, 160, 200 mm
Flow rate: 36 m³/h - 180 m³/h
FOR EXTRACT AIR Circular disc valves with manually adjustable annular gap Nominal sizes 100, 125, 160, 200 mm Volume flow rate range 10 – 50 l/s or 36 – 180 m³/h Diffuser face made of formed sheet steel, powder-coated For ...
TROX
DN: 80 mm - 250 mm
Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without ...
DN: 400 mm - 2,000 mm
... the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way the clear opening. PRINCIPAL ADVANTAGES Strong construction, penstocks ...
DN: 50 mm - 500 mm
Temperature: -29 °C - 150 °C
The KTN 431 is an updated version of the globe valve with cast CF8M stainless steel body and classes available in 150/300/600/1500, ANSI flanges. Thanks to the presence of molybdenum [Mo] in the alloy, we have dramatically ...
KTN
... flat gate is attached to silo and vessel discharges and assures the optimal sealing of stored dusty and granular bulk goods up to 8 mm in size. The pneumatically activated flat gate is normally used as ...
Stanelle Silos + Automation GmbH
DN: 50 mm - 2,000 mm
Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife ...
C.M.O.
DN: 2.5 in - 16 in
... wheel. The non-rising stem flange x flange gate valves are available in 2 ½” – 16” and the non-rising stem push–on and mechanical joint gate valves are available ...
DN: 50 mm - 400 mm
Pressure: 10, 7, 8, 5, 6 bar
Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...
Watergates GmbH & Co. KG
DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C
... steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile ...
Lohse GmbH, Maschinenbau
DN: 50 mm - 500 mm
Pressure: 16, 25, 40 bar
Temperature: -50 °C - 250 °C
Gate valves, also known as sluice valves, are great for tight shut-off of liquids. The Engelsberg gate valves are particularly suitable for fibre suspensions ...
DN: 50 mm - 600 mm
Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer ...
INTERNATIONAL FLUIDES CONTROLES
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. ...
Please specify:
Help us improve:
remaining