DN: 200 mm - 250 mm
Pressure: 10 bar - 40 bar
... Standard features Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ Die-forged body and bonnet Full bore Outside screw and yoke Non-turning rising stem Yoke sleeve Available with flange and buttweld ends Optional standard features GA Split ...
Stahl-Armaturen PERSTA
DN: 50 mm - 2,000 mm
... Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate ...
C.M.O.
... Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed ...
DN: 3 in - 24 in
Pressure: 150, 300 psi
... actuated knife gate valves are available from 3" to 24" in size. Available in standard pressure ratings of 150PSI (ANSI B16.5 Class 150), heavy duty fabricated carbon steel or stainless steel knife gate ...
DN: 80 mm - 1,200 mm
Pressure: 1 bar - 42 bar
Temperature: -196 °C - 538 °C
... Wedge gate valve gate can have two different versions: rigid gate and flexible gate. QLS series actuator can be used with Z7 valves, and EML series ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 100 mm - 1,000 mm
... The rotary bin discharger AHBG is designed for discharging mealy or granular bulk materials from storage bins and hoppers to downstream processing machinery and scales in grain & oil, feed and food processing industries. ...
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... Applications: Feed-water and live steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, ...
DN: 80 mm - 400 mm
... slide
gate
valve from Kubota Brabender Technologie. Designed for reliable on/off control in feeder and process lines, primarily used as the automatic refill
valve for loss‑in‑weight feeders.
Technical ...
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... ul>
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... the Flat Slide 200 slide
gate
valve from Kubota Brabender Technologie. Designed for solids on/off control and as an automatic refill
valve for loss-in-weight feeders.
Technical details
- Slide
Kubota Brabender Technologie GmbH
DN: 0.25 in - 2 in
Pressure: 600 psi
... Investment casting ASTM-A351, CF8M, Class 600, Screwed bonnet, Beveled dise, Intégral seat, Rising-stem, and Handwheel. Body - SUS316 orSUS304 Bonnet - SUS316 or SUS304 Net - SUS304 Stem Washer - SUS316 orSUS304 Pin - SUS316 orSUS304 Thrust - ...
... Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of ...
DN: 2 in - 12 in
Pressure: 200 psi
... • Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be operated by the ...
DN: 0.375 in - 0.5 in
Pressure: 145 psi
Temperature: 32 °C - 140 °C
... FAV Series soft start valves protect your pneumatic system and give you peace of mind whenever installation or repair occurs. The valves raise incoming pressure, supplying air at low speed to avoid damaging critical components. ...
DN: 100 mm - 400 mm
Pressure: 24 bar
... . In standard applications, the fast-action explosion isolation gate valves can be used with dust, gas or gas and dust mixtures. Not unlike HRD systems, the explosion isolation gate valves ...
DN: 80 mm - 800 mm
Pressure: 4, 6, 10 bar
Temperature: 180 °C
... The gate valves to the sectioning of a bulk material, through the central shovel which intersects the fluid passage and provides complete sealing. Steel or polymer construction with square, round or rectangular passage ...
DN: 160, 110, 200 mm
... We offer a range of manual valves (knife gate valves) for piped slurry systems, which fit standard PVC pipe diameters of 110, 160 and 200 mm. All valves are in acid-proof stainless ...
... Slide gates are a component widely used in material transport and storage plants. Motridal produce heavy-duty valves with either manual, motorised or pneumatic control. The field of production, in addition to a full range ...
DN: 1 in
Pressure: 20 bar
Temperature: -10 °C - 66 °C
... NAFFCO Gate Valve is usually installed in Dry riser inlets and Fire Hose reel assembly where unauthorized operation has to be avoided.A typical application of this valve is installing these at inlet pipe ...
naffco
DN: 32 mm - 1,500 mm
Pressure: 10, 16 bar
... These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are ...
... Sliding gate is used to allow or interrupt product flow, or change the flow direction to any desired terminal. It is generally placed under chain conveyors, tubular conveyors etc. Features & Advantages • Compact Design • Leakproof Structure • ...
DN: 50 mm - 1,200 mm
Pressure: 600,000 Pa - 1,600,000 Pa
Temperature: -40 °C - 600 °C
... Knife Gate Valve Z673H series slip type pneumatic knife gate valve is a kind of important control valve in the plant production process. Switch controlling can be ...
Temperature: 60 °C - 302 °C
... VACUUM VALVE SERIES ULVAC, Inc.’s vacuum valve employs the vacuum technology of the vacuum specialized manufacturer accumulated through many years of experience. Please use ULVAC, Inc.'s vacuum valve, ...
DN: 25 mm - 200 mm
Pressure: 10 bar - 16 bar
... HYDRANT GATE VALVE S58 Compact gate valve with rubber-covered self expanding split ring seal, suitable for frequent operation with turbid irrigation water. On-off valve ...
the best suppliers