Globe valves

The PP34070 is a ball valve compression device manufactured by FGS Brasil. It is offered in 3 variants, the PPR407020, PPR407025 and the PPR3407032 with the dimensions and weighs 20mm x 20mm, 160g, 25mm x 25mm, 190g and ...

Applicable Standards: • STEEL GLOBE VALVES, BS EN 13709/API 600 • STEEL VALVES,ASME 816.34 • FACE TO FACE, ASME B16.10 • END FLANGES ASME 816.5 • BUTTWELDING ENDS,ASME 816.25 ...

DN: 6.8 mm
Pressure: 100, 30, 15 bar
Temperature: -200 °C - 100 °C

Application: Cryogenic applications down to -200° C / -328° F using high purity reactive gases Key Advantages: Reduced gas absorption and desorption from seat material Fully contained seat Double-walled, electronic beam ...

DN: 100, 150 mm
Pressure: 16 bar

Dry Pipe Valve The DN100 and DN150 TYCO Model DPV-1 Dry Pipe Valves are differential valves used to automatically control the flow of water into dry pipe fire protection sprinkler systems ...

DN: 15 mm - 65 mm

Free flow 2-way pneumatic on-off valves are the most effective response to fluid interception. Available in normally closed, normally open, double effect or manual operated.

... compared to the conventional Double Block & Bleed Valve assemblies. As a secondary seal, the valve is provided with a lubrication system which allows feeding a special lubricant into the valve ...

DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C

Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure ...

Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an ...

Planning, construction and delivery of high quality valves for power plant and process heat generation.

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 350 °C

The KTN 423f is our globe valve with bellows connections DIN . Carbon steel body, it has an anti-leakage stem and a non-ascending shaft, it has gasket and spiral-wound graphite gaskets. Lubricator for ...

Pressure: 60 bar - 280 bar
Flow rate: 40 l/min

... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min

DN: 0.75 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C

... rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Reinforced Nylon 6 Diaphragm: NBR, FPM (Viton®), EPDM, Polyurethane

DN: 40 mm - 900 mm

MODULATING ALTITUDE VALVE- Single acting. Same construction as Model C000/CF000. Level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options.

DN: 25 mm - 300 mm
Pressure: 69 bar
Temperature: 540 °C

The SMS-7100 direct spring operated pressure relief valves has been designed to protect against excess pressure steam boilers and to provide superior performance. These valves are designed and manufactured ...

DN: 29 mm - 155 mm
Pressure: 18, 8, 25 bar
Temperature: -5 °C - 110 °C

... Threaded end connections: • Standard female according to UNI ISO 228/1. Special executions: • EPDM seal. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control.

DN: 15 mm - 250 mm
Pressure: 16, 40 bar
Temperature: -50 °C - 200 °C

A Globe valves is a linear motion valve that is primarily designed to stop, start and regulate flow. Conventional Globe valves may also be used for isolation ...

DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F

Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve ...

DN: 0.25 in - 0.5 in
Pressure: 142 psi
Temperature: -10 °C - 180 °C

... handle on top of the actuator. One valve can act as two valves -- a pneumatic valve and a needle valve. This enables a simpler piping layout, space conservation, and ...

DN: 19.05 mm - 203.2 mm
Pressure: 1.2 bar
Temperature: 150 °C

Vacuum Angle valve is one type of the poppet valves. When the poppet is moved toward the top of the valve, the internal body cavity is open to the system, and flow is unimpeded (maximum ...

DN: 24 in - 36 in

DeZURIK’s stocks 24-36” Cast Iron PEC Eccentric Plug Valves with Mechanical Joint (MJ) end connections and NBR plugs. Manual actuators are configurable with handwheel or 2” nut. The interiors and exteriors can accept ...

DN: 0.5 in - 6 in
Pressure: 200 psi

... plug valve also available in flanged connection ends. With a semi steel construction, 200# WOG; 150# SWP. Rectangular port, semi-steel construction. Available in sizes 1/2" - 6" Series 820 (Screwed End Plug Valve) Screwed ...

DN: 250 mm - 3,000 mm

The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...

P2/J2 series adopt unbalanced trim design, top guiding, and simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 ...

Pressure: 5,000 psi - 15,000 psi
Temperature: -29 °C - 121 °C

... the most ideal valve among cementing and fracturing manifolds right now. Remarks: valve can also be opened or closed easily under 10000psi. Features： Working Pressures: 5000~15000psi Material Level: ...

DN: 50 mm - 600 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 593 °C

Globe valve Product type Switch Valve Product description Globe valve Model J41H Size NPS 2”～24”(DN50～DN600) Operating temperature ...