Inner diameter: 2.03 mm
Pressure: 450 bar
Temperature: -70 °C - 260 °C
... Goodridge 600 series hose range is a PTFE lined hose, wrapped in a Stainless-Steel braid; designed for brake and clutch applications. (AN-04, AN-06 & AN-08 600 series hoses and fittings are available ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 20 mm
Outer diameter: 27 mm
Pressure: 14 bar
... Hose 1 1⁄4"-LP-20-01500 14 BAR is one of the Hyva Hoses with the highest safety standards. This hose has a Maximum Working Pressure of 14 bar, with an inner diameter of 1 1⁄4 and a length of 1,500 mm. Every ...
Pressure: 45,000 psi
... co-extruded over the built-up hose layers to provide a tough, chemical- and wear-resistant outer coating. Outstanding chemical- and wear-resistance Superb flow with minimal friction loss in hydraulic or fluid ...
Inner diameter: 19 mm - 63.5 mm
Outer diameter: 32 mm - 77 mm
Pressure: 4 bar - 21 bar
... The inner tube of fabric-braided rubber hydraulic hose is made of special NBR rubber, which makes it resistant to hydraulic oil. There are two textile braids on the tube ...
Dicsa
Inner diameter: 9.3 mm - 52 mm
Outer diameter: 19.5 mm - 68.1 mm
Pressure: 21 MPa - 112 MPa
... This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C-+121°C(-40°F+250°F). This hose shall consist of an inner tube of oil resistant ...
Guangzhou YuBen Hydraulic Technology Co., Ltd.
Inner diameter: 5 mm - 102 mm
Outer diameter: 11.2 mm - 115 mm
Pressure: 30 bar - 400 bar
... structure of rubber hydraulic hoses consists of many layers. The types and functions of these layers are as follows; 1. Inner Rubber Layer It is produced by pulling synthetic rubber paste. It ensures that the fluid ...
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 13.4 mm - 34.4 mm
Temperature: -40 °C - 100 °C
... Tube - oil and water resistant synthetic rubber Reinforcement - several texile netting inserts Cover - synthetic rubber with oil and water resistance Standard - DIN EN 854 ...
Dietzel
Inner diameter: 3.5 mm - 25.6 mm
Outer diameter: 8.5 mm - 33.6 mm
Pressure: 70 bar - 250 bar
... environments having high humidity and saline levels. Applications: Hoses of the OL7 Marine Series have been created for high pressure hydraulic applications in MARINE environments; this type of hose ...
ZEC
Inner diameter: 0.25 in - 4 in
Pressure: 4,000 bar
... At Redfluid we manufacture hydraulic hoses of any type with very short delivery times. A hydraulic hose is a flexible pipe within the hydraulic ...
Inner diameter: 3.2 mm
Outer diameter: 7.5, 7 mm
... steel brake hoses) are flexible hoses fitted to a hydraulic brake system.The intent of braided stainless steel brake lines is to improve brake system effectiveness and longevity as compared ...
QINGDAO HAINUO MACHINERY CO.,LTD
Inner diameter: 2.5 mm - 17.5 mm
Outer diameter: 7 mm - 24.5 mm
Pressure: 3 bar
... high heat resistance, highly flexible. Operating temperature: from -40º C to +125º C,peak temperature 150º C BIODIESEL HOSE ACCORDING TO DIN 73379 TYPE C Resistance against biodiesel, petrol and diesel fuel, ECO-DIESEL (RME- ...
Inner diameter: 19 mm - 50.8 mm
Outer diameter: 32 mm - 68 mm
Pressure: 250 bar - 1,780 bar
... Construction, Marine & Offshore, Industrial Hydraulics, Cranes, Earth Moving TYPE APPROVAL: MSHA, ABS, MED, DNV - GL, BV. APPLICABLE SPECS: EXCEEDS EN 856 4SH - ISO 3862 4SH Internal hose: Synthetic rubber, ...
Muncie Power Products
Inner diameter: 0.5 in - 4.5 in
Outer diameter: 1.05 in - 5.37 in
Pressure: 250, 300, 400 psi
... Rubber Furnace Door Fiberglass Hose Designed to withstand extreme heat (1000°F) from exterior in open hearth steel mill furnaces. Carries water to the furnace door. Construction: Tube: Green SBR non-conductive synthetic rubber. Reinforcement: ...
Inner diameter: 40 mm - 200 mm
Outer diameter: 50 mm - 222 mm
Pressure: 3.92 bar - 10.78 bar
... PVC hose with rigid PVC spiral. Transparent yellow color reinforced with a spiral. Smooth interior. Diameter from 40 mm to 200 mm. - Applications: Transfer of liquids, irrigation and agricultural facilities. - Lightweight, great ...
KANAFLEX SPAIN
Inner diameter: 6 mm - 76 mm
Pressure: 0 bar - 1,450 bar
... million load changes, far beyond the standards of ISO 6803 (400.000 cycles) Many hoses even tested according to ISO 6802, with one million cycles. Our production of hose lines In-house operating procedures ...
Inner diameter: 3.2 mm - 23.05 mm
Outer diameter: 5.85 mm - 27.03 mm
Temperature: -50 °C - 210 °C
... Braided Teflon (PTFE) hose is an extruded Teflon corewith an outer stainless steel braid for strength. Teflon (PTFE) hose isflexible and strong , when combined with stainless steel, can perform under ...
Inner diameter: 6 mm - 25 mm
Outer diameter: 16.5 mm - 40.1 mm
Pressure: 0 bar - 420 bar
... Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. ...
Delivered length: 5 m
... The DN20 rubber hose is used for SF6 gas transmission with any SF6 equipment that has a DN20 connection (fitting popularized by Dilo). 5 meters in length with brass DN20 female connections on either side. A rubber hydraulic ...
Inner diameter: 5 mm - 50 mm
Pressure: 250 bar - 500 bar
Temperature: -40 °C - 125 °C
... Our hydraulic hoses are conform to the standards in force SAE, DIN & EN. Our hoses guarantee any form of sealing, for all types of of fluids Our hoses can be used in low, medium, high ...
Inner diameter: 4.8 mm - 25 mm
Outer diameter: 10.2 mm - 33.3 mm
Pressure: 70 bar - 210 bar
Swage Ferrule: PF-R7 - Category 2.10 Tube: Oil Resistant Thermoplastic Elastomer Reinforcement: Two Polyester Braids Cover: Thermoplastic Elastomer with High Ozone and Abrasion Resistance Continuous Service: -40°C to +100°C Max. Operating Temperature: ...
Inner diameter: 0.24 in
Outer diameter: 0.38 in
Pressure: 1,421 psi
... About our Flexible Metal Hose Corrugated, annular, flexible 321 or 316L stainless steel hose with a 304 over-braid Manufactured with state-of-the-art technology in a world class facility Hydro-forming, ...
Ameri-Source
Inner diameter: 4.6 mm - 50.4 mm
Outer diameter: 5.4 mm - 52 mm
Pressure: 2,320 psi - 14,500 psi
... Short Description: SAE 100 R1AT /DIN EN 853 1SN STANDARD INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One braided of high tensile steel wire COVER: Black Neoprene Blend (I.D. less than 25.4mm wrapped or smooth cover) WORKING TEMPERATURE: ...
Qingdao Hyrubbers Co., Ltd.
Inner diameter: 6 mm - 400 mm
Pressure: 1 bar - 250 bar
Temperature: 0 °C - 1,000 °C
... 1.4404) Fuel hoses of Well Teflon with mesh and fire protection hose Hydraulic hoses Elastomer hoses (NBR, CR, EPDM) Hoses of PTFE Connection ...
Inner diameter: 3.5 mm - 25.5 mm
Outer diameter: 6.6 mm - 29.6 mm
Pressure: 942 psi - 12,000 psi
... Product Speicifactions SAE 100 R14 Tube:Temperature chemical resistant PTFE material Cover:Braided with stainless steel Temperature Range:-60℃ to +260℃ ...
Inner diameter: 8 mm - 200 mm
Pressure: 8 bar - 100 bar
Temperature: -270 °C - 600 °C
... The corrugated flexible metallic hose is a durable unit designed to avoid elongations due to Hydroforming. It is designed in compliance with EN 10380. It is designed with AISI 304 and A 240 Type S304. ...
ERRE.DI. srl
the best suppliers