Hydraulic presses

Force: 3,300 kN
Opening: 1,200 mm
Rate (strokes/min): 100 p/min

Tryout and pilot production press with four servo-hydraulic die cushion systems for fine blanking, embossing and calibrations. Tryout and pilot production press: Blanking and forming ...

Force: 20 tf
Opening: 54 mm - 1,044 mm
Stroke: 190 mm

Pneumatic/hydraulic operated workshop presses Model WSP 20P. Can be operated both pneumatically with foot pedal and manually with handle. Standard Equipment • Moveable cylinder • Easy to read pressure gauge • ...

Force: 50 tf
Opening: 68 mm - 1,048 mm
Stroke: 200 mm

Pneumatic/hydraulic operated workshop press Model WSP 50P. Can be operated both pneumatically with foot pedal and manually with handle Standard Equipment • Moveable cylinder • Standard with ...

Force: 100 tf
Opening: 0 mm - 945 mm
Stroke: 300 mm

Movable cylinder. Handle for adjustment of the piston speed (stepless) and piston stroke (up/down). Easy movement of table to new position. Foot pedal for start and stop.

Force: 800 kN - 6,300 kN

... characteristics: - Variable stroke with motorised adjustment. - Adjustable speed - Motorised ram height adjustment - Hydraulic overload safety-device The criteria that we set ourselves: - Elegance - Security ...

Hydraulic production presses for blanking and drawing operations are more flexible then their mechanical colleagues. Very quick, they become multifunctional in order to respond to wide variety in forming technology. ...

Force: 0 kN - 30,000 kN

... use to which they will be put: - High-speed hydraulic drive. - Performant drive to maintain the slide-table parallelism. - Full controlled multi-point drawing cushion - Pre-acceleration of the hydraulic ...

Force: 12 tf

Pressfitting. Muffler pressfitting one or two stations. Description and Technical data Models: DP 800, DP 1200 • One station unit • Work power 12 Ton • Distance range table/mace from 700 mm min. to 2000 mm max. • Working stroke ...

Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal mode one station or two ...

Force: 257, 8 tf

Simultaneous Pressfitting and Ridge-Locking vertical mode. As part of the new technological generation, the DPCR 1000 offers the best answer to simultaneous pressfitting and ridge-locking need in the manufacturing of mufflers. Capacity ...

Weight: 4 kg
Overall length: 436 mm

Battery powered hydraulic presses for tap changers. EPPL 2,5 • diameter of the copper tube: inner 3 mm, outer 5 mm • copper multi wire of 7 strands, each of a diameter of 0.65 mm EPPD 3 • diameter ...

Weight: 3 kg
Overall length: 402 mm

Battery powered bender for aluminium and cooper rectangular wires. • (Thickness) x (width) in the range (2 ÷ 5.5 mm) x (3 ÷ 12 mm) • max. cross section 63 mm2 Special features: • efficient Li-Ion battery • automatic ...

Weight: 4 kg

Battery powered punching tool for aluminium and cooper bundle of sheet metal • width of the bundle of sheet metal 30 ÷ 55 mm • punching holes with a diameter of 6.5 ÷ 13 mm Size range of bundle of aluminium sheet • ...

Force: 1,980 tf
Opening: 1,980 mm

... standard have a bending depth of 600 mm. STANDARD FEATURES Robust steel construction Hydraulic unit requiring minimum maintenance Emergency stop button Hydraulic safety system Electrical safety ...

Force: 294.2 kN - 2,451.7 kN
Opening: 1,050 mm

... usage area between 500 mm and 2050 mm. STANDARD FEATURES Robust steel construction Hydraulic unit requiring minimum maintenance Emergency stop button Hydraulic safety system Electrical safety ...

Force: 30 tf - 400 tf
Stroke: 400 mm - 400 mm
Table width: 350 mm - 720 mm

... wishes of our customers. Hydraulic presses are manufactured from carefully selected suitable materials after the necessary designs and engineering calculations are made. STANDARD FEATURES Robust steel construction Hydraulic ...

Force: 300, 600, 1,000 kN
Opening: 200, 300, 400 mm
Stroke: 200 mm - 400 mm

... /600/1000 are especially designed for demanding applications and automated use. •2 column press frame: extraordinarily high parallelism and easy access to press area •extremely accurate temperature ...

Force: 50 kN - 5,000 kN
Opening: 100 mm - 1,000 mm
Stroke: 100 mm - 1,000 mm

... 30-40 mbar), floating upper platen for lower press range (1-10 kN), higher temperatures up to 700°C, cassette cooling system,… •2 column press frame: extraordinarily high parallelism and easy access ...

Force: 150, 300 kN
Opening: 175 mm
Table width: 250, 200 mm

Fontijne Presses’ benchtop LabTop series – available with a press range is an automated hydraulic laboratory press, which combines the modest footprint of our manually operated LabManual ...

Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm

UP Line - Universal Hydraulic Pressbrakes Standard Accessories: "• Top gooseneck pressbrake die and holders • Bottom die with 5 V-Channels • Adjustment system for taking down or up the table • Pressure gradeless ...

Force: 1,000, 1,500 kN
Stroke: 300 mm
Table width: 1,020, 1,520 mm

UT Line - Universal Hydraulic Forming Presses Standard Accessories: "• Adjustable table height • Top and bottom table with T-Chanels to replace a mould • High capacity workshop forming press with ...

Force: 600 kN - 2,000 kN
Stroke: 250, 300 mm
Weight: 835 kg - 4,800 kg

UK & UPM Line - Hydraulic Workshop Straightening Presses Standard Accessories: "• Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ...

Force: 490.3 kN

... atmosphère controlled automatic hot press according to customers requirements with different force capacity, measure and température. PRODUCT INFORMATION MSE Furnace is produced atmosphère controlled automatic hot ...

Cold isostatic pressing applies pressure in a liquid from every direction to achieve greater uniformity of compaction (high-quality parts) for intricate shapes as compared to uniaxial pressing. MSE Technology’s Cold Isostatic Presses ...

Force: 294.2 kN
Opening: 150 mm

... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...

Opening: 115 mm
Max. pressure: 30 MPa
Hydraulic pump power: 4 kW

Crimping Inside Diameter - : Ø 14.5 mm to 101 mm Crimping Precision - : 0.02 mm Voltage - : 380V 50 Hz Rated Flow - : 11 L/min Die - : 12 dies

Force: 30, 20 tf
Stroke: 150 mm
Hydraulic pump power: 3 kW

Chrome Plated Cylinder Steel Welded Frame Oil Pressure Gauge Pressure Adjustable

Force: 30, 20 tf
Stroke: 150 mm
Hydraulic pump power: 3 kW

Chrome Plated Cylinder Steel Welded Frame Oil Pressure Gauge Pressure Adjustable

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

The V1.32, also known as R32, it’s the first model produced by Neotecman. The innovative design and forging system creates a new tendency in the forging industry. Today, this model still offers a very especial and innovative solutions ...

Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar

PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 mm This system ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, ...

Force: 400 kN - 4,000 kN
Opening: 700 mm - 1,300 mm

... case-hardened and chromium-plated. The slides are guided by self lubricating wear plates sliding on steel guides. The hydraulic group is mounted up the oil tank. It's equipped with: - Main-motor pump unit and one ...

... Transversal movement of the cylinder. System with hydraulic cylinder for lifting the steel plate from the table of the machine. Longitudinal movement of the table. The hydraulic group ...

Force: 0 kN - 150 kN

... welded, stress relieved and shot-blasted. Slide guided by columns that slide throught self lubricating bushes. Hydraulic group, fixed in one side of the machine, is equipped with: - Main-motor pump unit. ...

60 kN Cordless Electro-hydraulic Compression Tool to Crimp Tubular and Al/Cu Lugs and Butt Connectors ESDC60 electro-hydraulic compression tool ✔ Output force: 60 kN ✔ Stroke: 17 ...

ESC120 electro-hydraulic compression tool ✔ Output force: 120 kN ✔ Stroke: 25 mm ✔ Autonomy: 110 to 220 crimping operations with battery 4.0 Ah ✔ Cycle time: 5 to 8 s depending on the section ✔ Dimensions: 385 ...

Force: 120 kN

120 kN Connectable Hydraulic Compression Tool to Crimp Tubular Lugs, Splices and other Connectors Connectable hydraulic compression head SU130 ✔ Hydraulic compression head which ...

STRAIGHTENING AND FORMING PRESS C-FRAME OR ARCH PRESSES Are adapted for custom work or mass production to use in aircraft, energy, agribusiness, automotive, heavy industry … Designed for a large range of products ...

CRIMPING LINE DRIVING IN, CRIMPING AND INSPECTION / AUTOMOBILE INDUSTRY 2 hydraulic cylinders 25 T Advantages of the system: Can be adapted for all types of products : silenbloc, eladip, élastomer, etc Characteristics 1 ...

Stroke: 500 mm

PRESS FOR R.T.M. PROCESSING This RTM compression press trucks parts allows the production with 3 different molds separately. Operations: The produced parts are dedicated to equip trucks cockpit, ...

Force: 320, 600, 800, 1,000 kN
Opening: 450, 500, 550 mm

... is completed as soon as possible and without permitting the deformaton of the mold. Integrated software that combines hydraulic and mechanical servopress working functions • Automatic feeding system • Lower actuator ...

Force: 200, 100, 150 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 2,192.1, 2,989.2, 1,494.6 kN
Opening: 450 mm

... and stroke endings come as standard which enable us to conveniently regulate the cylinder stroke. The motorised 2 speed hydraulic unit has automatic rapid speed disconnection. It includes a cylinder decompression valve. ...

Force: 797.1, 996.4, 1,494.6, 1,992.8 kN
Opening: 250 mm

... deterioration. One-speed motorized hydraulic unit. Glycerin gauge with reading in tonnes. Operation is carried out by means of a lever-operated hydraulic distributor. Electric ...

Force: 797.1, 2,192.1, 2,989.2, 996.4, 1,494.6 kN
Opening: 250, 300 mm

... conveniently regulate the cylinder stroke. A two-speed motorized hydraulic unit with automatic high speed deactivation. It’s equipped with a cylinder decompression valve. It works with hydraulic ...

Force: 99.6 kN

Description Single or double acting models available. Large daylight with open sides for easy loading. Heavy duty welded construction. Rigid frame under full load. Moveable work head for maximum versatility. Adjustable ...

Force: 149.5 kN

Description Adjustable bed. Moveable work head. Wide variety of power sources. Large daylight. Heavy duty construction.

Force: 249.1 kN

Large daylight with open sides for easy loading. Heavy duty welded construction. Rigid frame under full load. Moveable work head for maximum versatility. Adjustable work bed with friction brake winch. Wide choice of ...

Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - - Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate ...

Force: 80 tf
Opening: 860, 1,000, 260, 220 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate ...

Force: 100 tf
Opening: 850, 280, 240, 250, 1,000 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate ...

Force: 3,150 kN

ODEN-WP is a hydraulic multi-purpose press for drawing, punching and embossing. The frame is made of steel and is welded into one piece (WP = Welded Plate). This model offers many options such as cushion, ...

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in ...

Force: 50,000 kN

The ODEN-FT hydraulic press is for press operations with higher tonnage and larger press beds. It is excellently suited to press hardening, drawing, ...

Used to extract water by equalising moisture over the entire width of the fabric / . Used to impregnate fabrics with chemicals and achieve optimum squeezing Speed Compensator Dancing roller group at the outlet, made up of two rollers ...

... to manage the flexo roller. Hydraulic Control Unit Specially designed to manage the oil flow. It also includes a pump of 30 l/min (6/7 bar) and a diaphragm valve. Flexo Roller Floating roller with special hydraulic ...

Force: 16 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...

Force: 25 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds with maximum diameter of 400 mm, automatic hydraulic pump and pressure stabilizer. This machine is equipped with a timer for the programming of ...

Force: 50 tf
Opening: 240 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...

Force: 150, 200 tf
Opening: 13, 10 in
Stroke: 13 in

... jobs. Other features of the 150-200T H-Frame Press include: • May be used horizontally for special pressing applications with user-supplied supports. • Work head has wide horizontal travel; rugged press ...

Force: 80, 100, 150, 200 tf
Stroke: 13 in

... ton presses. • Fast approach of double-acting, 13 1/8" (334 mm) stroke cylinder is provided by PQ1204S “Quiet” electric/hydraulic pump with remote control hand switch. Operator can view work from all sides with fingertip ...

Force: 25 tf
Stroke: 6 in
Weight: 240 lb

The Power Team C-Frame Press is available with a 25T capacity. The Open throat design makes loading and unloading work easy. Other features of the C-Frame Press include: • Can be bench mounted or on ...

Five-mug digital heat press This iKonix digital mug heat press prints on up to five items at a time. Suitable on a wide range of items, this heat press transfers on promotional products ...