In-line pumps

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

Single stage, single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump ...

Flow: 400 m³/h - 80,000 m³/h
Head: 30 m

... ZLB type axial flow pump is characterized by its large capacity,low head,etc.It can transport clean water whose temperature is less than 50℃,and also other liquids with physical and chemical properties similar to clean water Application Area Large-small ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

The DV Series pumps are single stage, single suction vertical in-line centrifugal pump. The pump is radially split casing design and it is non self-priming. The pump shaft is well balanced by top ball bearing and bottom bearing bush. This ensures that ...

Pressure: 400, 350, 450 bar
Weight: 3.5, 13.5, 10.5 kg

... Muncie Power's fixed displacement piston pumps are designed for higher operating pressures than traditional gear pumps. Muncie Power offers four series of in-line piston pumps, including bent axis and tandem models. All mount directly to the PTO with ...

Flow: 232 m³/h
Head: 120 m

The pumps shall be non-self-priming, vertical multistage centrifugal pumps. The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tiebolts. The base has suction and ...

Flow: 76.4 l/min
Pressure: 30 bar
Power: 5.4 ch

Semi-hydraulic three-diaphragm pump. For use with aggressive chemicals. Parts in contact with spray liquid re-inforced nylon, Kynar and stainless steel 316L. Diaphragms in BlueFlex™. O rings in Viton®. Three diaphragm design ensures smooth pumping action ...

Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m

... New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ecological designing • High ...

Flow: 0 m³/h - 7 m³/h
Head: 0 m - 120 m
Power: 1.1 kW - 4 kW

Thanks to the special design of the body and impeller and the absence of pulsations, these single-block peripheral impeller pumps are widely used for dosing liquids, in laboratory micro-systems, in-line measuring systems, spray systems and applications ...

Flow: 30 us gal/min - 54 us gal/min
Weight: 30, 20 kg

Liberty Pumps brings to you the 442-Series. A professional-grade line of battery back-up pump systems called StormCell®. These systems feature high-output pumping, an energy efficient DC pump for longer run times and professional-grade charger/controllers. ...

Flow: 2.5 m³/h - 1,200 m³/h
Power: 0.37 kW - 250 kW
Fluid temperature: 120 °C

... The ISG series single-stage single-suction vertical pipeline centrifugal pump, is designed by our technician and domestic pump experts together, they using the excellent hydraulic model, and the IS type centrifugal pump performance parameters on the ...

Flow: 3, 5, 9 m³/h
Pressure: 15 bar
Head: 10 m - 115 m

... Applications ■ Water Distribution Pressure Boosting ■ Rainwater Recovering ■ Irrigation, Gardening, Sprinklers ■ Wash down unit ■ Slightly corrosive liquids ■ Compact close-coupled design, robust and corrosion resistant ■ Plug-in type ...

Flow: 100 m³/h - 280 m³/h
Power: 3 kW - 37 kW
Fluid temperature: 80 °C

... The 6inch trash pump centrifugal ST Series is the standard for industrial and sewage applications. The heavy duty construction and easy-to-service design have made this pump the standard in the industry. Summary The 6inch trash pump centrifugal ST Series ...

DFEG-High Efficient inline circulating pump(Basic type)

Flow: 4 m³/h - 1,200 m³/h
Head: 4.5 m - 108 m
Fluid temperature: -15 °C - 110 °C

... The product is designed in the form of disassembly and assembly that can be pulled out at the top. The pump can be repaired without affecting the piping system. FEATURES AND ADVANTAGES Low noise. APPLICATIONS HVAC systems District heating Water ...

Flow: 40 l/h - 120 l/h
Pressure: 14 bar

The Mono series solenoid pumps are economical, compact and capable of developing high pressure. A piston within the pump oscillates at power line frequency. No additional motor or control is needed. For intermittent duty only. Pump flow rate is up to ...

Flow: 0.0267, 0.0502, 0.0642 l/min
Power: 17 W - 35 W
Input diameter: 1.6, 2.4, 3.2 mm

The second generation 6K series is a uniquely compact multichannel peristaltic pump range for accurate dispensing of liquids. The stepper motor drive offers the versatility of finite speed control and, combined with optional optical position sensors, ...

Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW

... Technical data Construction Vertical multi-stage close coupled pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). All parts that come into contact with the liquid, including wet-end covers, ...

Flow: 2.7 m³/h - 91.2 m³/h
Pressure: 10, 15 bar

... 1.Product Desciption: APPLICATION. The main advantage of the BOAO sine pump is its capacity to pump a great variety of viscous liquids, from1 mPa.s up to 100000 mPa.s Furthermore, it is capable of pumping liquid products that require very careful handling ...

Flow: 0 us gal/min - 15,400 us gal/min
Pressure: 0 psi - 3,626 psi
Head: 0'00" ft - 3626'00"

... TYPE HPE Multi stage centrifugal pump in ring-section design. Center-line or foot-mounted casings available Wear rings in composite material (carbon fiber filled PEEK) for smaller clearances while maintaining the same reliability and best efficiency Intermediate ...

Flow: 750 m³/h
Head: 160 m
Power: 315 kW

... Standard Pump Solid shaft construction with an external recirculation line for cooling. Designed for zero-leakage operation in applications that demand robust and reliable performance. Design Features of Hayward Tyler Standard Canned Motor Pump Model Solid ...

Flow: 250 l/min
Head: 21 m
Power: 2 ch

Flow: 0.1 l/min - 30 l/min
Pressure: 5 bar

... Features Repeatability Accuracy ±0.1% or Less, Pulsation Rate ±1% or Less Capable of ultra-constant flow rate and High-Precision fluid supply. Recommended for processes that require rigid quality control, such as precision thin film coating, measurement ...

Flow: 22 l/s
Head: 61 m
Power: 0.25 kW - 11 kW

... ApplicationsHVAC-system pumping; light industrial/ process pumping (water or glycol based) DescriptionThe Armstrong 4360 pipe-mounted pumps are designed for space-saving installation and long service life. Materials Cast iron or ductile iron casing Silicon ...

Flow: 0 us gal/min - 7,000 us gal/min
Fluid temperature: 550 °F

... Hot Oil Pumps Most of Cornell’s W, Y, RB and H series clear liquid pumps can be used in hot oil applications, allowing for flows up to 7,000 GPM and heads up to 540′. Features and Benefits: Uniform thermal expansion Ductile iron and stainless ...

Flow: 9.2 m³/h - 126 m³/h
Pressure: 10, 16, 20, 5 bar
Power: 4 kW - 110 kW

The Willett™ Pump is a vertical, single acting positive displacement ram pump, which is designed for long life, low maintenance and optimum energy efficiency. It is the most cost-effective solution available on the market to pump difficult and abrasive ...