Stroke : 0 mm - 100 mm
Speed: 1.5 m/s
Force: 500 N
... profile guide rail for high-precision guidance can be fitted with one or two carriages aluminium profile with slots for fastening fully covered low maintenance ready for connection of inductive reference and end switches optionally available: adapter ...
JBO
Speed: 3 m/s
Force: 30,000 N
... • The world’s first concrete robot travel axis • Very little ecological impact • Extremely small footprint due to internal E-Chain • Torsional stiffness • Enormously low vibration due to material properties of concrete • Low noise emissions • ...
IPR - Intelligente Peripherien für Roboter GmbH
... There are 23 models of Express DS Series slides. These slides are standard catalog slides and available in Basic (no feed mechanism) and Hand Wheel configurations. The following is a summary of standard features: 100% ...
SETCO
... Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability ...
Föhrenbach GmbH, Positionier-Systeme
... intelligent stepper motor and a brushless servo motor with 1000 line encoder. The stepper motor options are available with rotary encoders. End of travel limit switches come standard on the D-Slide linear stage. The ...
Stroke : 100 mm - 7,000 mm
Speed: 0 m/s - 5 m/s
Force: 428 N - 47,160 N
... precision and repeatability are the goals pursued by Tecnoline, the line that identifies the production of linear modules, linear axes and linear actuators for automation. The linear ...
Stroke : 2,000 mm
Speed: 6 m/s
Force: 150 N - 900 N
... design, the linear motor systems are not only cost-effective, but also well suited for very harsh environments. They are also ideal for setting up cross-table and gantry systems (more information can be found under the menu item “Multi- axis ...
KML Linear Motion Technology GmbH
Stroke : 20, 100 mm
Speed: 0 m/s - 2.5 m/s
Force: 8 N
... lying on its side. The linear axis is designed for small to medium-sized strokes with loads up to 30 N. The hard-coated aluminum slide is dynamically driven by a Tecnotion UC3 motor. Preload is achieved ...
Eitzenberger GmbH
... possible combinations, we can put together a perfectly matched drive unit for your application. Linear axis with motor and control unit. Integrated linear guide Ball screw Protected interior thanks ...
Gunda Automation GmbH
... a rotary table into an axis with a standard linear motor axis Our solution combines the precision of linear motors with the versatility of a rotary table. The linear ...
... This unit consists of a rectangular aluminium profile with 2 integrated roller guides. The carriage is moved by a belt drive. On the drive side the pulley is beared on the shaft of a planetary gear. Belt tension can be readjusted by a simple screw adjustment ...
Bahr Modultechnik GmbH
Stroke : 0 m - 4 m
Force: 0 kN - 100 kN
... The E series Linear units from Sopap Automation is a horizontal unit that provides motion for long strokes within the range of the standard to the extended lengths. All of this done while it carries loads that may have ...
Stroke : 50, 25 mm
Speed: 30 mm/s
Force: 45 N
... horizontal and vertical applications This compact and robust linear axis is easy to integrate and is characterized by an optimum price-performance ratio together with precise operating parameters. ...
Speed: 10 mm/s
Force: 150 N
... The cheap linear stages of the LTM 80 series are suitable for applications in continuous operation as well as fitting in machines. The special guides make sure a practical slip-stick-free drive and high capacity. Because of the combination ...
... ALSS: STANDARD LINEAR FLOOR AXES Characteristics Linear floor axes increase your polyarticulated robots’ range, so that they can act over long distances. Precise, quick and dynamic. Payload from 100 Kgs Key points Compatible ...
Lucas
Speed: 192,000, 162,000 mm/min
The STN family’s smallest member, capable to carry up to 1000 kg useful payload. Its body structure is a unique, completely welded steel structure, ensures the low weight and rigidity, meanwhile providing a cost-efficient solution even at longer travel ...
TDRi Robotics AB
... precise and durable guiding lines are vibration-reducing and insensitive against impacts and environmental influences. The slide bushings and the spindle nuts be suited for dry operation. For higher load, we recommand lubrication with ...
Stroke : 65 mm - 1,520 mm
... table for linear actuators GN 291 any stroke inside the maximum stroke length is available. Besides the extensive range of tube clamp connectors there are a number of different components for fixing the linear actuators ...
Stroke : 10 mm - 350 mm
... Linear actuators and linear actuator connectors expand tube/clamp connector assemblies with single tube linear axes with linear actuator connectors and guide carriages that have been ...
... from rows of pallets, or work on very large components. Control of the linear unit is integrated as a mathematically coupled axis in the robot controller, dispensing with the need for an additional controller. Suitable ...
Stroke : 1 mm - 3,860 mm
Speed: 0 m/s - 1 m/s
Force: 25, 50 N
... and high-performance! Linear Unit GSF 8 40 R10 is an efficient turnkey system with minimal space requirements. This economic Linear Unit uses only a few components to deliver maximum ...
item industrial applications
Stroke : 100 mm - 300 mm
Force: 600 N
... Linear Units
Ready-to-use manual
linear actuators with built-in lead screw and guide.
Unitized design eliminates parts selection and assembly, ideal for quick positioning tasks.
Mechanical ...
Stroke : 100 mm - 300 mm
Force: 600 N
... Linear Units
Ready-to-use manual
linear actuators with built-in lead screw and guide.
Unitized design eliminates parts selection and assembly, ideal for quick positioning tasks.
Mechanical ...
Stroke : 185 mm - 310 mm
... mounted on the slide in combination with our centring rings 20240. Lubrication holes (DIN 3405D flush type grease nipples) are provided on both sides of the slide to lubricate the ball screw drive and the rail guide. Form ...
norelem - Éléments standard mécaniques
Stroke : 200 mm - 1,500 mm
Speed: 3 m/s - 5 m/s
... Linear actuators with toothed belt drive and profile rail guide Material: Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord ...
norelem - Éléments standard mécaniques
Stroke : 500 mm - 1,000 mm
... Double tube linear actuator with mounting bracket Description Material: Housing aluminium. Precision tube DIN EN 10305, stainless steel 1.4301. Trapezoidal thread spindle steel. Note: The double-tube linear actuator ...
norelem - Éléments standard mécaniques
Stroke : 1,000 mm - 5,800 mm
Speed: 3,000 mm/min - 20,000 mm/min
... for Reliability and Precision Precision and long-term durability are our priority. Every SCL-3 is built with: Precision Linear Guides: For smooth and fast movements, ensuring consistent accuracy over time. Closed-Loop Motors with ...
Stroke : 31 mm - 1,511 mm
Speed: 160 m/s - 1,480 m/s
... The KK MTECH® axis are single- axis modules that integrate a ball screw and a guide, with a space-saving design. The main features are: 1.Integrated system 2. Easy installation and maintenance 3. Compactness ...
... Group with trapezoidal screw for manual or motorised horizontal movements with mechanical or electrical position indicator. The Simple “B” models have integral bronze supports of minimal dimensions (without dust protection). Economical Group ...
Bimeccanica s.r.l.
the best suppliers