Measuring instruments

... Measuring Module ValueMaster base • measurement of torque, speed, angle, pressure, force and stroke • connection of 2 sensors • control I/O interface with signal output e.g. for SPC • analysis of values ...

... 230 V AC • RS232 + USB interface • battery 4 h continuous operation • with storage for documentation and measuring / connecting cable protection: open suitcase IP 54 closed case IP 65 The GMV2-K is a microprocessor-controlled ...

... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 41 available input/output modules 90 logical channels recording data with maximum speed 10Hz (ten samples per second) 4 GB ...

... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 27 available input/output modules 60 logical channels colour LCD display 3.5" TFT, with touchscreen recording data with maximum ...

As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation of a typical controller ...

... The Infralytic UV-Mini is an additional measuring device for the Infralytic hand-held device NG3. We designed the UV-Mini especially for measuring the oil layer thickness on metallic surfaces for complex, ...

The HSR-10 mobile handheld radar sensor is a measurement device for the contact-free measurement of the flow velocity of open rivers, channels and sewers. The sensor detects the surface flow velocity utilizing Doppler frequency shift and displays the ...

... effects through an extra-large measuring surface - Perforated plates: optimal thermal flow between ground and sensor and melt water run-off - Stable, durable aluminium construction - No preparation of the measuring ...

... 96 x 96 via CT Mobdus RS485, pulse output multifonction meter NAUTIL920 Multifunction meters displays all the installation’s electrical parameters. The Nautil 920 multifunction meter displays all the network’s electrical characteristics. It also ...

... 96 x 96 via CT Mobdus RS485, neutral measured multifonction meter NAUTIL950 Multifunction meters displays all the installation’s electrical parameters. The Nautil 950 multifunction meter displays all the network’s electrical characteristics. It ...

... 96 x 96 via CT Mobdus RS485 Ethernet, neutral measured multifonction meter NAUTIL960 Multifunction meters displays all the installation’s electrical parameters. The Nautil 920 multifunction meter displays all the network’s electrical characteristics. ...

The MAP4-DC12 module allows the measurement of 12 direct current circuits. It is powered by the MAP4-DC9 central unit and features a 4V DC current input for Hall effect current sensors. This module is designed for DIN rail mounting, with a 4-module width ...

... tester is mainly used to measure the contact angle of liquid to solid, that is, the wettability of liquid to solid. This instrument can measure the contact angle of various liquids to various materials. It can measure the contact angle ...

... schools, petroleum, chemical and other scientific research fields. Equipment features: The instrument adopts modern technology manufacturing, the instrument uses advanced special CCD digital camera, with high resolution ...

... Automatic image measuring instrument is a coordinate measuring machine, also known as image probe coordinate measuring machine. It uses the optical microscope to carry out free magnification ...

... General Characteristics • Measurement device for rounded cables with a diameter from 1 to 20mm. (error margin + 1-2 % • Rubber coated wheel for a greater grip and a better measurement. • Mechanical meter counters with manual reset. • Cable cutter. • Appropriate ...

... General Characteristics • Measurement device for rounded cables with a diameter from 2 to 30 mm. (error margin + 1-2 %) • Rubber coated metric wheel for a greater grip and a better measurement. • Mechanical counter with manual reset. • Cable cutter. • ...

... • Measurement device with a diameter from 2 to 50 mm (error margin + 1-2 %) • Rubber coated metric wheel for a greater grip and a better measurement. • Mechanical meter counter with manual reset. • Appropriate for cables: steel, copper, electrical, ...

... Electronic gauge is designed for measuring wheel rolling circle diameter. Measurements are made directly on rolling stock without wheel set roll-out. The measurement of the diameter is performed according to the "three ...

... Electronic gauge is designed for measuring back-to-back distance of railway, metro and tram wheels in the course of checkup, examination, repair and formation of wheel sets. Measurements are made directly on rolling stock ...

... The tension meter DTX with its 12 measuring ranges up to max. 60 daN is suitable for use in the textile and wire industry. The models can be equipped with ball-bearing V-grooved guide rollers for material speeds up to max. 5000 m / min. The ...

The universal mechanical tension meter is widely used for versatile applications including textile, fiber and wire industry. It has a flexible usable tension meter which can work up to 25 up to max. 20000 tex in a textile industry and a 0.05 up to max. ...

... The tension meter of series ET with a measuring head as small as possible and the roller on long shafts are optimal usable for textile applications at hard to reach places with limited access space. The unit is available with 3 tension ...

... X624EM is the most advanced instrument of the MAE offer for geoelectric prospecting. The possibility of parallel measurements, the all-in-one solution with onboard CPU and thanks to the combination of advanced algorithms and powerful ...

... georesistivity meter for SEV and multi-electrode geoelectric prospecting with 24 or 48 electrodes. The main feature of this instrumentation is the maximum versatility of use combined with the high speed of execution of surveys, both 2D ...

... button, it is managed automatically by the instrument and lasts few seconds. Numeric and graphic data is stored on SD memory and then elaborated with dedicated TCreader software supplied together with instrument. Heat ...

... The HP-GTS from Rotronic is a tried-and-tested instrument for measurement of equilibrium relative humidity and temperature in stacks of paper and cardboard. Humidity measurements in stacks of paper, cardboard and textiles for paper and ...

... The HygroPalm HP31 is a handheld instrument with a fix Rotronic probe, it is able to perform spot measurements and logging of relative humidity, temperature and psychrometric parameters. Advantages of the HygroPalm handheld device • ...

... • Benchtop or wall mounting • Measures and records CO2, relative humidity and temperature • Accuracy:  ± 30 ppm, ± 2.5 %RH,  ± 0.3 K • ROTRONIC HYGROMER IN-1 humidity sensor • Up to 40`000 data point memory for CO2, humidity and temperature values • Adjustable, ...

... just measure !You need a simple and robust mono-parameter instrument, purchase a ODEON Classic with one ultra low power probe (pH/ORP/T, DO, Conductivity or Turbidity)You need a versatile instrument ? Purchase a ODEON ...

Portable oximeter with OPTOD Titanium sensor on 3 m Supplied with flexible carrying case and sodium sulphite bottle

... graph, combined with the dual labeled keypad allows for usage of the gauge in various positions while still being able to easily view and operate. The FG-7000TA the ideal torque instrument for various applications such ...

... column type air gauge, micrometer display is a precision, non-contact measuring instrument when combined with a customized air probe sensor. Air gauge measurement has been around for decades. It is a ...

... air gauge micrometer display is a precision, non-contact measuring instrument when combined with a customized air probe sensor. Air gauge measurement has been around for decades. It ...

... The EMM... digital multimeters are made in 72x72mm and 96x96mm flush-mounted housing with reduced depth. The TRMS measurements allow correct operation even in critical conditions. The main measurement parameters are: • Voltage (line and total) • ...

... The EMM-D... digital multimeters are made in DIN modular housing, 3 and 6 module. The TRMS measurements allow correct operation even in critical conditions. The main measurement parameters are: • Voltage (line and total) • Current (phase and total) • ...

... The EMM-... VA digital multimeters are made in a modular 6-module housing. The measu- rements made in TRMS (True Root Mean Square / true effective value) allow correct operation even in critical conditions. The main measurement parameters are: • Voltage ...

The Dtm 323 Series of Hand-held Relative Humidity and Temperature Meter, manufactured by Tecpel Co., Ltd., is a device can generate with a maximum temperature of -50 ... +1000 °C. It features an intense stable humidity measurement of +/-2.5%, with auto ...

... one-hand operation _Dual display Salinity and Temperature _Automatic Temperature Compensation _Average calculation, interval measuring, gram-conversion _Use highly accurate NTC temperature sensor _Auto power off function _CE-Mark approval ...

... materials, and other materials. A three-way displacement sensor is built into the design to measure the deformation. The instrument is also equipped with a large LCD display and a micro-printer. ...

... operation, and it is an indispensable supporting instrument in the laboratory. 2. Main technical parameters: Control methods: Electric Point Interval: 10mm Striking point each time: 40 Max. gauge length: 400mm Striking ...

... μLevel is a precision Level system for the measurement of machines. According to your requirements we can offer a wide range from a simple handheld system up to a differential system with software. • Fast on site calibration • Easy handling of system ...

... measurements or laser equipment calibration. A laser standard serves as a precise reference for testing and calibrating laser instruments in a lab. This ensures that measurements and experiments conducted using these devices are accurate, ...

Offset Laser Frequency Standard LHJ-1F is a wavelength reference device designed to be used for calibration and comparison of He-Ne lasers (632,8 nm wavelength). The model is based on LJSC-03-11 Laser. The absolute laser frequency is defined by the iodine ...

... Portable equipment, completely digital, for the measurement of the resonance frequency of vibrating systems in the ultrasonic welding technology of plastic materials. Extremely precise and reliable, easy to use, connectable to all kind of converters, ...

... installation and maintenance The Stereoscopic Width Gauge DigiScan XD4100, designed for installation above the roll tables in hot strip and plate mills, is state-of-the-art technology for measuring the width and ...

The PT-SV100 Scott Volumeter determines bulk density of powders according to the following standard Monographs: USP , Method II bulk density and tapped density of powders, EP , DIN ISO 3923-2 (metallic powders): determination of apparent density and optional ...

... Of measurement instruments for pressure, level, temperature of all trademarks. Of all control equipment : test benches, control cases for metrology, pressure reduction, inertness, pneumatic tests … MOUNTING OF SEPARATORS Diaphragm ...

... 3 INSTRUMENTS IN 1 DC Field measurements Spectrum Analysis – FFT up to 10 MHz Broadband measurements up to 60 GHz WEIGHTED PEAK METHOD (WPM) Real-time comparison in % with the selected limits up to 10 MHz ONE SINGLE METER FOR ALL PROBES Isotropic ...

... 24/365 MONITORING Guaranteed autonomy with the “Smart Energy” function (AC + solar panel + battery) BROADBAND MEASUREMENTS Up to 3 kHz in LF and 40 GHz in HF IP 66 ENVIRONMENTAL PROTECTION Resistant to extreme weather conditions COMPLIANCE WITH ...

... 24/7 Monitoring Guaranteed autonomy with the “Smart Energy” function (AC + solar panel + battery) Broadband measurements Up to 3 kHz in LF and 60 GHz in HF IP 66 environmental protection Resistant to extreme weather conditions Compliance with ITU-T ...