Mechanical pumps

Flow: 3 m³/h - 120 m³/h
Pressure: 8 bar

... Fletcher SUMO and ROTA massecuite pumps are designed to transfer massecuite or magma products in a wide flow range (3 to 120m3/h), High quality Cail & Fletcher SUMO and ROTA massecuite pumps benefit from a robust mechanical ...

Flow: 0 l/min - 0.125 l/min
Pressure: 210 bar - 300 bar
Weight: 14.5 kg - 38 kg

... Hydraulic pumps to achieve low noise creates a friendly working environment, low energy consumption joins environmental protection. Low consumption for cost-saving, etc., Most importantly, it can greatly improve the accuracy and stability ...

Flow: 56 l/min
Power: 220 W

... EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - available: extra ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 45 m
Fluid temperature: 0 °C - 95 °C

... centrifugal electric pumps are horizontal monobloc pumps with external mechanical seal. Their particular construction with open impeller allows pumping highly acidic or alkaline fluids, including very ...

Flow: 13 l/min
Power: 0.26, 0.18 kW

... of the tank and primed before use. - If the pump sucks in air due to lack of liquid, the priming operation must be repeated. - To ensure a correct life of the pump, it must not be run dry, as the mechanical ...

Flow: 8 m³/h - 37 m³/h
Head: 7 m - 40 m
Power: 0.75 kW - 7.5 kW

... operation, the pump is refluxed and stirred, and mechanically crushed to prevent blockage. The YW pump is a single-stage single-suction, submersible centrifugal pump. The hydraulic components, bearing ...

Flow: 0.336 m³/h - 95,000 m³/h

... solid particles is suitable to transfer. Pump flow rate is proportional to pump speed. The pressure from the pump is not relevant to pump speed and flow. The pump has ...

Flow: 500 l/min
Head: 40 m
Power: 0.18 kW - 5.5 kW

... to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical resistant materials can be supplied ...

Flow: 71, 97 l/min
Head: 11, 20 m
Power: 550 W

... and the pump tube acc. directives ATEX 2014/34/EU are required. The handy and powerful device can be used as a drive for the ATEX certified sealless pump tubes made of stainless steel (Ø 41 mm), the mixing pump ...

Flow: 20 m³/h - 350 m³/h
Power: 5.5 kW - 75 kW

... for desander pump, desilter, mud cleaner, mud mixing device, mud pump supplement, etc.. Sizes range from 3 x 2 to 8 x 6, and customers can choose different models according to their needs. BZ centrifugal pumps ...

Flow: 100 m³/h
Power: 0.37 kW - 11 kW
Weight: 20 kg - 220 kg

... operation. FLUID pumps are optionally equipped with a balanced single internal mechanical seal that is easy to assemble and offers a sanitary design while being EHEDG standards-compliant. The motors used to drive ...

Flow: 0 m³/h - 122 m³/h
Pressure: 12 bar
Fluid temperature: -10 °C - 140 °C

... pipework disassembly. SLA pump is a bare shaft rotary lobe pump. It is made of a stainless steel. Pump casing and cover, and two-lobe rotors with sanitary attachment. SLA rotary lobe pump ...

Pressure: 350 bar
Power: 20 W

... PAG pneumatic pumps are provided for centralized lubrication systems with grease where progressive distributor are used. The drive of the unit is carried out by a simple-action pneumatic piston, which is controlled by compressed air. ...

Flow: 50 l/min
Power: 55 kW
Length: 245 mm

... Electric self-priming vane pump for use in agriculture, industry, workshops, petrol stations and similar facilities. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), GTL, HVO and R33 Self-priming with ...

... centrifugal pump. Submersible Pump-Motor is used drainage, sewage pumping, general industrial pumping and slurry pumping. Submersible Pump-Motor manufactured in India, China, European Origin available. · ...

... The working principle of a centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric ...

Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm

... Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 ...

Flow: 0.13 m³/h - 50 m³/h
Pressure: 4 bar - 16 bar
Power: 4 kW - 15 kW

... PCPs, 67% of the product texture is protected – a huge amount compared to Lobes pumps and Bi-Wing pumps, which only protect 15%. HyCare™ is the cleanest food grade pump available on the market. 3-A ...

Flow: 0 l/h - 1,800 l/h
Pressure: 15 bar
Power: 1.5 kW

... - Pump body in 316L stainless steel - Rotor and scraper in food industry grade plastic - Mechanical seal in widia - Inlet/outlet diameter: 50 mm - Minimum speed of rotation speed: 40 rpm - Calculated capacity per ...

Flow: 0.5 l/min
Pressure: 689 bar
Length: 387 mm

... allowing the addition of cooling fluid, these pumps can easily be used to pump both solvents and CO2 3. Remote Diagnosis Even with our robust designs, unforeseen problems can occur. In-order to ensure the pumps ...

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... 44 MATERIALS - Pump body: Cast Iron - Motor Support: Cast Iron - Impeller: Brass - Shaft with rotor: Stainless Steel AISI 304 - Mechanical seal: Ceramic/Graphite/NBR - Mechanical seal (KPM 50-80): ...

Flow: 0 m³/h - 7,000 m³/h
Power: 255 kW

... Pumping of turbid or slightly contaminated liquids. Cooling pumps in power stations Conventional thermal plants Sea water pumping. Industry Aquaculture farms Theme parks Materials Pump body, ...

Flow: 180 l/h
Head: 9.5 m

... monitoring and fault switch-off; LCD display for permanent operation and fault monitoring, vacuum meter, 2 separate supply connections: optionally with electrical, mechanical or no anti-siphon valves, all line connections ...

Flow: 66 m³/h
Pressure: 3 bar
Head: 5 m - 29 m

... Submersible Drainage Pumps, Vortex Impeller. Portable installation. Materials : Cast Iron Flange : Threaded flange or with elbow Applications : Waste water for domestic and small commercial properties ...

Flow: 0 l/h - 1,000 l/h
Pressure: 8 bar

... MIA Series Mechanical Diaphragm Pump Flow rate: 0-1000 l/h Pressure: up to 8 bar Accuracy: +/- 2% of rated flow from 10 to 100% of rated flow Mechanically actuated PTFE diaphgram Safe: leak ...