- Hydraulics - Pneumatics >
- Valve >
- Metal check valve
Metal check valves
Pressure: 0 psi - 3,000 psi
... made from stainless steel to ensure it doesn’t corrode or rust over time and when exposed to harsh outdoor environments. This check valve is rated for high pressure systems of up to 3000psi. ...
DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C
One way valve,double seal version, female-female made of stainless steel Body material: Stainless steel (1) Pressure regulator: Stainless steel (2) Spring: Stainless steel (3) spacer: Stainless steel (4) Sphere: Stainless steel ...
Type: Plug valves Material: steel, stainless steel Description: Application: This type of restrictor valve can be installed to restrict flow in one direction and allows reverse free ...
Pressure: 0 bar - 30 bar
Temperature: 0 °C - 151 °C
The sanitary spring check valves in this product series are ideal for either vertical or horizontal mounting, being especially designed for use in the pharmaceutical or sanitary fields. These products ...
AERRE INOX Srl
DN: 0.125 in - 1 in
Pressure: 400, 320 bar
Temperature: -20 °C - 100 °C
In line check valves available from 1/8" to 1" bsp, Max.working pressure 400/320 Bar, oil flow rate up to 160 Lt./min. (depending on the size)
F.lli TOGNELLA
DN: 15 mm - 150 mm
Temperature: 400 °C
Disc Check Valves are recommended after traps discharging into closed systems to guarantee Non return or no reverse flow. These check valves can be mounted between pipe ...
DN: 20 mm - 250 mm
Pressure: 64 bar
Temperature: -38 °C - 310 °C
Engelsberg BAS 102 Swing Check Valve Swing check valve for liquid and gas flow. The disk design allows quick shut-off to prevent backflow; however, it opens at ...
Ramén Valves AB
DN: 15 mm - 100 mm
Use : Check valve for general fluids Body Shape : Wafer Face to Face : According to manufacturer standard Tightness: Metal to Metal Max working pressure : 40 bars Type ...
DN: 1 in - 10 in
Design Features:Silent Check Valves are designed to prevent water hammer in multi-story buildings and for use in vertical turbine pump installations when pumping from a well to an elevated reservoir. ...
DeZURIK
DN: 2 in - 48 in
Temperature: -267 °C - 537 °C
... (Wafer Style Check Valve) Our industrial grade 304/316 stainless steel swing check valve is designed for a flanged piping system, between two flanges. ...
DN: 32 mm - 200 mm
Design No. Size SVS : 32 to 200 SVC : 32 to 125 Sériés Number SVS : Steel body SVC : Ductile iron body
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 120 °C
Food Grade Non Return Valve Stainless Steel SS304 Check Valve A check valve is a valve that prevents ...
DN: 46 mm - 179 mm
Pressure: 2,000 psi - 20,000 psi
... Standard. The valve trim adopt sulfide-resistance steel and able to be used in H2S condition, valve body made by alloy steel forging with good performance. Two types of Check valves ...
DN: 8 mm - 50 mm
Pressure: 20 bar - 420 bar
Temperature: -29 °C - 595 °C
Forged gate valve Product type Switch type Product description Forging gate valve Model Z11/41H Size NPS 1/4”~2”(DN8~DN50) Operating temperature -29℃~595℃acc to material Operating ...
Beijing Valve General Factory Co., Ltd
DN: 0.5 in
Pressure: 0 bar - 400 bar
Temperature: -10 °C - 120 °C
... pressure gauge valves per DIN 16271, the test pivot is sealed by a lens-type sealing ring and a screw cap placed on top; with valves per DIN 16272, the test pivot is separately isolated by an additional ...
DN: 0.25 in - 4 in
Pressure: 400, 125, 175 psi
Temperature: -12 °C - 178 °C
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubble-tight ...
DN: 6 mm - 10 mm
Pressure: 1.5, 12.5 bar
Use : welding and cutting Fluid : oxygen, acetylene Quick coupling : function
DN: 0.125 in - 0.5 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 130 °C
Ease of use : Easy to install Construction : Brass and nickel-plated brass Safety : for ringmains Construction Brass body Highlight Network safety
DN: 15 mm - 80 mm
Pressure: 100 mbar - 5,000 mbar
Non-return gas valve to prevent gas creepage or surge, for gas, air and oxygen. Features & Benefits: GRS: not flame-arresting GRSF: with sinter bronze flame arrester, so flame-arresting in the case of use ...
DN: 10 mm - 80 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Robust spring-loaded check valve type 4000 from Schubert & Salzer in seat cone design made of stainless steel with high flow rate for aggressive media and high operating temperatures. ...
DN: 0.25 in - 1.25 in
Pressure: 0 psi - 5,000 psi
Temperature: -40 °F - 250 °F
Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. DT Series Check Valves ...
Parker Quick Coupling Division
DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C
Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless steel ...
DN: 0.25 in - 1 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe ball check valves for high or low pressure hydraulic circuits prevent flow reversal in a circuit or protect against overpressure that can occur in certain parts of a circuit. Unguided ...
DN: 0.25 in - 2 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe piston check valves prevent reverse flow in a circuit or protect against overpressure that can occur in some places of a circuit. The guided valve may or may not have ...
DN: 0.25 in - 2 in
Pressure: 0 bar - 1,500 bar
Temperature: -20 °C - 200 °C
Duff-Norton Europe piston check valves prevent reverse flow in a circuit or protect against overpressure that can occur in some places of a circuit. The guided valve may or may not have ...
BALL CHECK VALVES Ball check valves VAP, with EN 12050-4 certification, are designed for use even with soiled liquids to provide full guarantees of operation in heavy-duty ...
They can be installed horizontal or vertical and do not require any maintenance. All Zenit ball check valves hold certification under the EN 12050-4 standard, appendix ZA.
DN: 0.25 in
Pressure: 0 bar - 30 bar
This valve can be set from 0 till 30 BAR. It is used on the lubrication point. Key features: - Pressure: from 0 to 30 bar (adjustable) - Material: galvanized steel - Diameter port. 5 mm Elastomeric-plastic seal ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining