DN: 25 mm - 150 mm
... Ball Valves in India. These valves are known for their robust construction, long and better service life and fine finishing. One can acquire our Flush Bottom Tank Valves at competitive rates. Specifications ...
Marck And Care Engineers Ltd.
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 120 °C
... applications. Elephant electric actuated valves use power-to-open and power-to-close, stays in the last known position with loss of power. The actuator will rotate the output drive 90° to change the position of the ball valve. ...
DN: 15 mm - 250 mm
Pressure: 10 bar - 160 bar
... 5211 ACTUATOR MOUNTING • Body: WCB/CF8/CF8M • Stem:20Cr13/17-4PH/SS304/SS316 Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator ...
ROPO GmbH
Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C
... Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F ...
... manufacturing, metal sulfates are precisely dosed into the precipitation tanks. These fluids are highly corrosive and the absence of foreign metals in this part of the process is critical. Therefore, all equipment ...
... JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and ...
DN: 50 mm - 1,500 mm
Temperature: -196 °C - 593 °C
... Non-rising Flat Gate Valve Product type On/off Valve Valve Type Non-Rising Stem Flat gate valve Model Z47H(F) Size NPS 2～NPS 60/DN50～DN1500 Design temp. ...
... Butterfly Valve has good sealing performance. High Performance valves are available in Soft Seat (Up to200°Cdepending on size and pressure), and Metal Seat (Up to600°C) variants (fire safe on application). Features 1. ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 600 mm
... SUPPORTED KNIFE GATE VALVE Epoxy coated cast iron body - AISI 304 knife - Metal seat - PN10 - Handwheel ...
DN: 50 mm - 600 mm
... solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/ metal Face to face : According to manufacturer standard Operation point : According ...
DN: 150 mm - 400 mm
Pressure: 50, 25 bar
... INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO ...
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 2 °C - 120 °C
... The Honeywell two way control globe valves V5011E, V5011R and V5011S are complete series of single-seated straight through globe control valves PN 16. They are suitable for heating, ventilation and air conditioning systems ...
DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -40 °C - 200 °C
... Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to- metal joint • Anchored lining with positive locking to ...
DN: 50 mm - 300 mm
Pressure: 300 psi
... 1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside & outside the body ...
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water 10 year warranty maintenance-free shaft sealing with self-lubricating EPDM lip gasket, replaceable under ...
Kemper Olpe GmbH
Pressure: 20,000, 10,000, 15,000 psi
... styles of ball valves (free floating and trunion) to provide effective shut-off of liquid or gas flow. Two-way ball valves offer complete shut-off with a convenient 1/4 turn. Valve actuators are available ...
DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min
... FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control valve runs with an utmost ...
Pressure: 400 bar
... Choke valve is a kind of control valves, mostly used in oil and gas production wells to control the flow of well fluids being produced. Choke valves allow fluid flow through a very small opening, designed ...
DN: 200 mm - 800 mm
Pressure: 10 bar
Temperature: 80 °C
... resistant and flameproof intermediate flange slide gate with low overall height. MATERIAL HOUSING :Cast ironMATERIAL SLIDING PLATE :Stainless steelSEALING :Circumferential packing aramid, o-ring viton Adjustable packing gland (aramid ...
DN: 50 mm - 2,000 mm
Pressure: 1, 1.6, 4 MPa
... hard sealing butterfly valve is an eccentric metal sealing structure, the sealing form is metal-to- metal sealing, the metal sealing ring can be exchanged for ...
DN: 2 in - 16 in
Pressure: 285 psi - 3,705 psi
Temperature: 0 °C - 107 °C
... The SchuF Maniflow Selector Valves (MSV) - a multiport selector valve type - is used in oil fields and other Oil and Gas applications for the testing and analysis of oil from two or more production wells. Previously this ...
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
... This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, in the “close” ...
A.G.P. VALVULAS 10 SL
DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi
... Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...
Galli & Cassina S.p.A.
DN: 50 mm - 600 mm
... Mouth Industrial Flange Metal Check Valve Water Supply , Adjustable Stainless Steel Swing Check Valve Flange swing check valve Overview of swing check valves Swing ...
DN: 50 mm - 350 mm
... .The valve seat is installed between the two valve body ,so the valve seat can be replaced easily . 3.To ensure the valve stem has straight line motions ,there is an anti-rotation device ...
DN: 15 mm - 200 mm
Pressure: 16 bar - 160 bar
... Metal seated ball valve design with three piece fixed ball structure for easy maintenance and replacement, The seat seal with wear-resistant high temperature properties made of a metal-to- metal ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 6 mm - 28 mm
Pressure: 414 bar
Temperature: -54 °C - 316 °C
... Needle valve is a fine-tuning valve with a needle-shaped valve plug, which is mainly used to adjust the air flow. The fine-tuning valve requires the valve opening to ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C
... of PTFE seats and metal seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications Butterfly ...
Doruk Endustri Ltd.
DN: 0.375 in - 0.75 in
Pressure: 0 psi - 10,000 psi
Temperature: 0 °C - 49 °C
... The NuQuip® Model HCV Series Control Valve is a pneumatically-operated fluid control valve designed for high pressures and high flow rates. These two-position valves can be used for 2-way or 3-way functions. ...
... Brass Angle Supply Valves HSV07 Model Number: HSV07 Product descriptions: Brass garden valve, brass supply valves, supply valve, brass angle valve, angle valve, ...
Ningbo Yinzhou Plumbing Hardware Co., Ltd.
... Stainless Steel Waist Drum Angle Seat Valve Features: Compact and lightweight Large flow and low resistance long lasting... Interface: DN15--DN50 Body material: stainless steel 304 Pneumatic ...
DN: 0.5, 0.75, 1 in
Pressure: 16 bar
Temperature: -10 °C - 165 °C
... This self closing globe valve features a solid bronze body and lever, with gland and FPM O-rings. This valve is well-suited to work for non-toxic, and non-inflammable liquids, gases, and steam. It operates in temperatures ...
DN: 1.5 in - 6 in
... GAS VALVES Floating ball valves Ball valves are cut off devices suitable for use both on natural gas distribution network and for liquid service when high performance on thightness at both high and ...
DN: 100 mm - 600 mm
... High-Temperature Metal-Seated Ball Valve is well suited for a variety of demanding services where high-temperature and abrasive solids are present. ● Unique, patented single-seat ball valve design. ...
DN: 25 mm - 250 mm
Pressure: 16 bar
Temperature: -40 °C - 196 °C
... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide intelligent, ...
Pressure: 4, 7 bar
A complete set of reservoirs easy-to-use and refillable for long term experiments. Compatible with multiple pressure-based experiments in parallel. It allows pressurization of standard lab vials (1.5 mL and 2 mL Eppendorf, 15 mL and 50 mL Falcon) for ...
DN: 50 mm - 450 mm
Pressure: 10 bar
... Flanged Knife Gate Valve Body: Carbon Steel, Ductile Iron, SS316 Knife: SS304, SS316 Disc: SS304, SS316L Wedge: SS304, SS316, SS316L Packing: PTFE Seal Ring: Polyurethane, EPDM, NBR, VITON Yoke: SS304, SS316 Packing ...
Valvesonly Europe
DN: 100 mm - 600 mm
Temperature: -200 °C - 470 °C
... Neles BWX series high performance butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes cold shock test and it can be used for gaseous ...
Pressure: 60 psi - 100 psi
... The FCM200 Micro Dispensing Valve features reduced flow path volume and enhanced actuation for cleaner line breaks. The FCM200 is suitable for streaming lines or dispensing dots of low to moderate viscosity underfill, encapsulants, conformal ...
DN: 20 mm - 200 mm
Pressure: 20, 50 bar
Temperature: -50 °C - 427 °C
... shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections offering a complete high-performance valve ...
the best suppliers