Input voltage: 8 V - 48 V
Current: 3.5, 6.5 A
... The VLCI-CAN-07 is a CANopen servo drive that is based on SMAC’s VLC, which is a 1-axis integrated controller/driver and an additional layer that provides the CANopen connectivity. ...
SMAC Moving Coil Actuators
... control and motor cables). Please note the permissible duty cycle of the controller. If the operating times are exceeded the controller switches off automatically. Attention: Electric ...
Input voltage: 24 V - 230 V
Current: 1.4 A - 8.5 A
... control stepper motors with less noise, less overheating, a smooth motion and the highest performances at high speed in comparison with most drives available on the market. Designed for the control of 2 or 4 phase hybrid stepper motors, ...
Ever Elettronica
Input voltage: 12 V - 48 V
Current: 0.6, 2.6 A
... The PCM4806E and PCM4826E IDEATM Drive Stepper Motor Controllers use USB for communication and are available in two current ratings. In addition to the stand-alone models, drives are available integrated ...
Haydon Kerk Pittman
... C3 Range of low voltage motor controllers include C3 - AC Motor Controller, C3-36V AC Motor Controller and the C3 Pump Combination Motor ...
CURTISS-WRIGHT
Input voltage: 24, 12, 48, 36 V
Current: 40 A - 240 A
... This AC motor controller uses dual high performance ARM Cortex microprocessors in a compact, package to deliver unmatched performance and a very flexible feature set. Model AC F2-A is optimized for use as a traction controller ...
Curtis Instruments
... The CDHD drives make possible the greatest efficiency and reliability in one of the most compact drives. The fact that Servotronix has implemented an intelligent selfoptimising function here - ensuring optimal configuration and therefore efficiency - ...
Current: 0.3 A - 3 A
... The Series R325P is a 2-phase stepper motor driver developed by Lin Engineering. It is supplied with +12 to 48 VDC power supply, 0.3 to 3.0 Amps Peak phase current, and full to 256 microstepping resolutions. The unit comes with an ...
Input voltage: 20 V - 48 V
Output voltage: 0 V - 30 V
Current: 0.3 A - 4 A
... >Description
The stepper
motor
controller SMDC-ST40 is designed to
drive hybrid/bipolar stepper
motors with phase currents from 300 mA to 4.0 A. The phase current can be set precisely ...
Input voltage: 12 V - 48 V
Current: 5, 2.5 A
... EtherCAT modules with dual/quad-axis universal drives for servo, step, and voice coil motors with a continuous power range of 10W to 100W (200W peak). The type of motor is selected by the user and can be set differently ...
ACS Motion Control
Input voltage: 400 V - 720 V
Current: 0 A - 400 A
Motor power: 0 kVA - 200 kVA
... Santroll’s High-Efficiency Motor Controller is designed to deliver exceptional performance, reliability, and energy efficiency for industrial applications. By integrating SiC power devices, this controller ...
Santroll Electric
Output voltage: 18 V - 80 V
Current: 3.5 A
... directly to a size 23 motor and supports a center pass-through hole for motor shaft of dual-shaft or linear actuator motors. Features: Micro-Step resolution from full to 1/256 microsteps Bi-polar chopper ...
OMS Motion, Inc.
Input voltage: 100 V - 240 V
Current: 2 A
... phase, unipolar stepper motor controller has the capability to drive and control precise movements, multi-axis and velocity. Velmex's VXM Controller System is capable of controlling to ...
VELMEX, Inc.
Output voltage: 12 V - 48 V
Current: 10 A
Motor power: 450 W
... The Micro Rayon Motor Controller is a miniature yet robust motor control solution capable of powering motors up to 450W. It provides advanced digital control for position, ...
Redler Technologies LTD
Input voltage: 5 V
... ~700nm full step size Operates up to 3 axes Plain text ASCII commands for easy integration Drivers for many operating systems Every full step has 64 micro steps Special wave forms for smooth movement Specifications Power Supply 5 VDC via USB-interface ...
Output voltage: 12 V - 24 V
Current: 3 A
... Motor controller for small stepper and BLDC motors. Due to its small size (40 x 60 mm), this housing-free board is ideally suited for integration into devices such as those used for laboratory automation. ...
Nanotec Electronic GmbH & Co. KG
Input voltage: 0 V - 36 V
Current: 1 A
... multiple propulsion engines, reducing the risk of damage through unbalanced loads without the need of significant PLC programming. Programable PLC features that are easy to configure. Remote monitoring and control options ...
Input voltage: 400, 230, 460 V
Output voltage: 24 V - 60 V
Motor power: 100, 3 kW
... plant engineering, pumps, medical technology, white goods and many more. Powerful controllers for servomotors and BLDC motors Our controllers for servomotors and BLDC ...
Input voltage: 24 V
Output voltage: 24 V
... The BP120FL motor controller is designed to drive two NDW motorized E-rollers. The BP120FL has two integrated sensor connections and is suitable for a large range of intralogistics applications. ...
Input voltage: 48 V
Current: 1.7 A - 4 A
... higher-level controller is required, a PLC can be connected via ProfiNet to intervene in the conveyor process when necessary. For more complex systems, the entire setup can be controlled directly from the TIA Portal or ...
Input voltage: 12, 24 V
Output voltage: 12, 24 V
Current: 0 A - 50 A
... miniBIDI is a compact sealed motor controller, providing efficient and optimal control of a small permanent magnet DC motor. It is available in 2Q or 4Q configuration for maximum versatility. ...
S.E.D. srl
Current: 2 A - 20 A
Motor power: 40 W - 860 W
... application, these drive controllers are designed with one motor output (e.g.: conveyor drive) up to a maximum of 12 motor outputs (e.g.: sorter application). Mechanically, motor ...
Input voltage: 12 V - 24 V
Current: 0 A - 20 A
... provide adjusting of a maximum continuous motor current, this function protects motors from overcurrent. There is an emergency input HARD STOP in the drivers. It is intended for mechanics protection - the motor ...
Smart Motor Devices
... TM4 NEURO 200 is a fully programmable controller designed to be used as the main vehicle management unit ...
... The DC motor regulator MTR 101 is designed for the decentralized field installation and offers the exact basic functions that you need for the reliable speed control of DC motors. The ...
MSF-Vathauer Antriebstechnik
... of servo control which enables the motor running smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC ...
... A group of professional and senior R&D engineers, process technology and quality control talents are equipped with high-precision precision machining equipment such as OKUMA, MAZAK, BROTHER, HASS, etc., and the German ZEISS three-coordinate, JENOPTIK ...
Hangzhou Hengye Motor Manufacturing Co.
... The PMX-4EX-SA model is manufactured by Arcus Technology, and is a 4-axis controller which has a USB 2.0 and RS-485 communication. It has a 6M maximum pulse rate with available acceleration in either trapezoidal or s-curve. There is ...
Arcus Technology
... EM-314 is a bipolar-chopper type microstepping steppermotor controller. The bipolar operation principle suits most stepper motors and provides the best torque. The microstepping function also enables great performance ...
Input voltage: 24 V - 72 V
Current: 30, 80, 140 A
... KLS-S controller. For use with Brushless motors 24v to 48v. Use for applications up to 30A continuous Up to 120A maximum. (Can also be used with 12v DC motors - a DC/DC converter ...
Electric Motor Power Pty Ltd
Input voltage: 595 V
... digital 2Q AC Slip-Ring motor controller. 12V – 500VAC supply voltage. Output power up to 595kW. PROTECTION – Interline device networks – High energy MOVÕs – Instantaneous over-current – Field failure and over-current – ...
Input voltage: 115 V
Output voltage: 0 V - 90 V
Current: 5 A
... The model SC is a 115 VAC input 0-90 VDC output economical motor controller where good performance at very low cost is desired. The SC is rated for 5 Amps continuos output current and operates in a single direction. On-board ...
Input voltage: 18 V - 36 V
Current: 2 A
... Weight 0.10 Kg IP IP20 Temperature range 0 - 50 °C ...
Input voltage: 20 V - 48 V
Current: 1 A - 3.5 A
... Application: Step motor driver for 2-phase step motors Supply voltage: 20...48VDC, momentary 52VDC Motor current/phase: 1.0/1.5/2.0/2.5Aeff; 1.4/2.1/2.8/3.5Apeak Step resolution: 200/400/800/1600 steps/revolution Signal ...
Middex-Electronic GmbH
Input voltage: 12 V - 36 V
Current: 2, 4.2, 4 A
... SmartStep belongs to the latest generation of stepper motors' controls. Both, control and power parts are integrated in only one platine. As a one channel control it can be plugged directly to a stepper motor. SmartStep ...
MICROSTEP GmbH
... axis driver for use with Piezo LEGS motors from PiezoMotor. It is one of the more advanced drivers in the product range giving the Piezo LEGS motors resolution down in the nanometer/microradian range. Driving the motors ...
Input voltage: 380, 200 V
Current: 2 A - 20 A
... •simple motor control with only a few elements • motor contactor and DC-brake in a single device •suitable for all asynchrohnous motors •controlled by microcontroller •easy mounting, ...
... The NSC-A1 Series motion controller is a powerful single axis stepper motor control system which combines a microstepping driver with a programmable controller into a compact envelope. ...
Newmark Systems Inc
Input voltage: 24 V
Current: 8 A
... KR-2416 controller. This allows the drive controller to be easily configured, and the parameterisation process does not require programming skills. Kern Drive The Kern Drive ...
the best suppliers