Pleated filter cartridges

Removal rating: 5 µm - 7 µm
Flow rate: 25, 20, 7.5 m³/h

Paper filtering cartridges for FCL filters The cartridges described below are suited for FCL filters. They are made with a special treated paper with ...

Removal rating: 5 µm - 7 µm

Paper filtering cartridges for FC filters The cartridges described on this page are suited for FC suction filters. They are made with a special treated ...

Removal rating: 50, 25 µm

... abbreviations: - Series SP. Pleated paper filtering cartridge with compression sealing. - Series SS. Pleated polypropylene mesh filtering cartridge ...

Removal rating: 3 µm - 49 µm
Flow rate: 3 us gal/min - 20 us gal/min

HILCO Microgard™ cartridges provide reliable, long-life contamination control. These efficient filter cartridges feature three filtration layers: outer cellulose-media layer for coarse ...

Flow rate: 5 us gal/min

Selexsorb™ GT is a patented adsorbent filter cartridge specifically designed for use with phosphate ester fluids such as AKZO Chemical's Fyrquel®. It maintains the original quality of fluids for prolonged ...

HILCO PH-CGJ style filter elements incorporate conductive fibers which are co-pleated in between two layers of hi-performance microglass filter media. As a result the HILCO anti-static ...

Removal rating: 1 µm - 100 µm

... SERIES type filter housing for a porosity of 0.2 to 100 µm. Very large filtering surface FILTECH™ cartridges are Highflow pleated filter elements. ...

Removal rating: 0.2 µm - 100 µm

... 0.2 to 100 µm. The L-TECH™ cartridge can be replaced in just 2 minutes, a real time saver! Very large filtering surface FILTECH™ cartridges are Highflow pleated filter ...

Removal rating: 20 µm - 50 µm

... avoid contamination risks. Very large filter surface FILTECH™ NY cartridges are Highflow pleated filter elements. The large filter surface area combined ...

Removal rating: 0.3, 2, 1 µm

... imported filter material cartridge: The filter efficiency > 99% at 2 microns. Chinese Filter Cartridge: The filter efficiency > ...

Flow rate: 0.1 m³/h - 1.5 m³/h

CLARIPleat filter elements provide high efficiency particulate removal in industrial applications. A high surface area and sharp cut off points provide reliable and consistent performance. CLARIPleat filter ...

Removal rating: 3 µm - 1,000 µm

SINTRIPore filter cartridges are manufactured from 316L stainless steel in absolute micron ratings from 3 – 1000 micron. These filters can be supplied in cylindrical or pleated ...

... High Flow filter elements feature a high surface area pleated construction (160mm OD) in lengths of 20”, 40” & 60” for high flow rate or high dirt load applications. A single high surface area design ...

Complete range of filters for air treatment. Air treatment, air conditioning and heating unit Clean room Spray booth

Complete range of filters for the treatment of liquids. Industrial process, water, oils, inks, paints, chemical products, hard water… Water networks Household and industrial water softeners, water ...

Complete range of filters for the treatment of liquids. Industrial process, water, oils, inks, paints, chemical products, hard water… Water networks Household and industrial water softeners, water ...

Removal rating: 1 µm

... set of pleated cartridge filters that are specially designed with composite glass fiber and inorganic filter aid. It is also composed of polyproylene media that is effective ...

Removal rating: 1 µm - 90 µm
Flow rate: 175 us gal/min - 500 us gal/min

Available in a range of cartridge lengths & particulate grades, our High Capacity (HC) Filters are available to order as spares, or as part of a total filtration solution. Each HC Filter ...

Removal rating: 0.1 µm - 100 µm

... membrane filter cartridges. The Top-pleat series is one of the finest ranges of pleated cartridges on market. Consisting of 4 layers of the highest quality filter ...

Removal rating: 2 µm - 50 µm

... either final filters or as protection for expensive membrane filter cartridges. The Econopleat series of pleated cartridges consist of 3 layers of ...

Removal rating: 1 µm - 100 µm
Flow rate: 40 m³/h - 80 m³/h

... higher flow rates compared to traditional 2.5” diameter filters, permitting use of fewer elements and lowering capital expenditure. Contrary to standard filter cartridges, high flow ...

Removal rating: 0.2 µm - 40 µm

... Microfiltration cartridges have been designed as an effective membrane prefilters and as final polishing filters for many liquid processing applications. Two media options are offered as standard, ...

Removal rating: 0.3 µm - 10 µm

... techniques to bond all the components therefore eliminating adhesives andextractables and optimising cartridge integrity. The SupaPore FPG cartridges use pleated depth media and are ...

SupaPore Nanofibre filters contain a pleated filter media that exhibits a very high level of positive charge under a wide range of process conditions. This provides a cartridge ...

MICRONYL filter element is designed and manufactured to satisfy and assure high quality and consistent performances in critical applications. MICRONYL cartridge includes Nylon 66 membrane at controlled ...

Removal rating: 0.05 µm - 15 µm
Flow rate: 18 l/min - 190 l/min

Fincell filter cartridges are manufactured from pleated layers of glass borosilicate and resin impregnated cellulose media. The resulting high media strength virtually eliminates fibre ...

Removal rating: 0.2 µm - 30 µm
Flow rate: 500 l/h - 3,000 l/h

Polysan PKN cartridges are pleated, with all polypropylene materials. These cartridges are rated for nominal filtration.

Removal rating: 1 µm - 100 µm

... system, used to filter out solid particles in the working medium and the colloidal material,effective control of pollution caused by the working medium. 1、Specifications of replacement Internormen hydraulic oil filters ...

The pilot filter element is used to filter impurities in the pilot oil, which controls the operation of various valve cores and hydraulic systems. Blocked filter elements can affect ...

The hydraulic oil suction filter can effectively remove small particles, impurities, and pollutants from the hydraulic oil. The filter element is made of good stainless steel mesh and polyester fiber ...

Removal rating: 0.22 µm - 50 µm

PP Pleated Filter Cartridge with multi-layer gradient structure design, multi-layer echelon filtration, large capacity space, high retention efficiency, can achieve more than 99.5% ...

Flow rate: 45 m³/h

Large flow Pleated filter cartridge has a large diameter of 6inch (152mm), No center pole, single opening design, the largest filtration area per pieces is more than 9 square meters, ...

Removal rating: 120 µm

Filter candles and filter cartridges are cylindrical filter elements, which are produced flat or pleated (for the enlargement of the ...

Removal rating: 0.1 µm - 100 µm

... Provide high retention and protect downstream filters Rated at 99.9% efficiency Designed for high capacity and long life Pore sizes: 0.10 to 100 microns Quality Assurance CPF filters ...

Removal rating: 0.22 µm - 5 µm

... 5.0 microns Quality Assurance CPF filters are developed and manufactured under an ISO 9001:2015 certified Quality Management System and designed to be used in cGMP-compliant processes. PGD Cartridges ...

Removal rating: 0.22 µm - 10 µm

... - 10 microns Quality Assurance CPF filters are developed and manufactured under an ISO 9001:2015 certified Quality Management System and designed to be used in cGMP-compliant processes. FGD Cartridges ...

Removal rating: 0.1 µm - 200 µm

... of beer, fruit juice, tea beverages, etc., stainless steel pleated filter elements also give full play to their filtration efficiency and long life. In addition, stainless steel pleated ...

Flow rate: 0 m³/min - 54 m³/min

... intake air filter portion of competitive marine air filters/silencers. Also available is the replacement filter for vacuum limiter air separators. The filter media for ...

Removal rating: 0.2 µm - 20 µm

... membrane filtration thanks to the fine, newly developed filter material (by 0.2 µm –type) and thus an increased membrane filter cartridge service life The larger filter ...

Flow rate: 710 ft³/min - 2,100 ft³/min

... Benefits Longer Engine Life - Donaldson Blue® air filters provide better engine protection by allowing much less contaminant to pass through than cellulose air filters Longer Filter ...

Removal rating: 0.6 µm - 10 µm

PREPOR GF liquid filter cartridges are utilized for the clarification of aqueous solutions, media and biologics. PREPOR GF filters have a high dirt holding capacity and exhibit exceptional ...

Gold Cone filter cartridges are used in the industry proven Gold Series dust collectors and include an open bottom, pleated conical addition to the inside of the filter ...

Flow rate: 600 l/min

... of the pump. A proper filter media selection is highly recommended. Although these filters play an important role in the hydraulic circuit, the general cleanliness level required by the system must be ...

Star-pleated FG dust filter elements for the separation of airborne particles. High load capacity Good cleaning behavior and high stability Optimized filter materials and ...

– Filter surface area: 3200 cm² – Material: Polyester – Dust retention: 99.8 % Pleated filter cartridge for vacuuming household and industrial dust, sawdust, wood ...

Removal rating: 3 µm - 100 µm

FiberSEP Series Filter Cartridge is made of stainless steel fibers by sintering, pleating and welding. Its filtration ratings ranges from 3μm to 100μm. It has uniform pore size, high filtration rating, ...