... -15°C to +50°C (+5°F to +122°F) Storage: -20°C to +70°C (-4°F to +158°F) Relative humidity < 90% non condensing Use - Portable instrument which can be used on the ground or across one’s shoulder or chest. ...
... Phase tester for LV network Standards 1000V CAT IV - IP65 Use UNITAG is a unipolar detector designed to test the presence of phase on insulated or bare LV conductors. The level of detection is indicated by a LED bargraph and ...
... The TT7415 detector checks the insulating quality of yours poles, rods and ropes. The tester does not only identify surface defects. Its capacitive principle of measurement allows to detect internal and external insulation faults. It ...
... / Standards • IEC 61557-7 • CE compliante / Use • Testing the phase sequence of a three phase system in order to protect rotating machine functioning. • DR706 is specially recommended for testing supply with unstable frequency : - Generator set. - ...
... PORTACOUNT® RESPIRATOR FIT TESTER In many of today’s workplace environments, a respirator and a proper respirator fit test are critical components of employee respiratory protection. Fire service and law enforcement employees, as ...
... A powerful combination The HGT1 is a handheld meter to measure ground impedance as well as step and touch voltages. Using the CPC 100 and CP CU1, test currents at variable frequencies can be fed into power cables or overhead lines ...
... Handheld polarity checker The CPOL2 can be used as an accessory for several OMICRON test sets: • CMC, COMPANO 100, CPC 100 and CT Analyzer It offers the following functionalities and features: • Polarity check of current transformers ...
The MR06-200 wire crimp pull sensor is a hand-operated solution for measuring wire crimp pull-off forces. The ergonomic handles and convenient tensioning mechanism make field measurements a breeze for applications up to 200 lbF (1,000 N). Squeeze the ...
... Measure wire crimp pull forces accurately and efficiently with the portable and customizable WT-205 tester. Easily apply up to 200 lbF (1,000 N) of force via an ergonomic lever. The tester's standard ...
... wire crimp pull forces up to 200 lbF [1 kN] accurately and efficiently with the WT-205M motorized pull tester. Portable and customizable, the tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other ...
... The Alluris FMT-W40 motorised wire-terminal pull- tester is designed for crimped wire terminal testing according to IPC/WHMA-A-620, UL 486, ASTM B913, USCAR 21, EN 2591-417, MIL-STD 202-H, NASA 8739-4 and many more relevant standards. Two ...
... operation of the FMT-W30 pull tester makes it very easy to use, and ideal as a portable device in situations where a constant pull speed is deemed not essential, or where mains power is not available to run a motorised ...
Passi Test Plus is a tool designed to assess the real quality of stainless steel. It consists of a “probe pen”, which contains the electrochemical solution, and an external storage unit. By pressing the probe pen on the surface, Passi Test Plus measures ...
Passi Test is a tool designed for those who need to know exactly the real quality of the stainless steel. It consists of a “probe pen” – which will be put on the superface to be tested – containing the electrochemical system and a reading external unity. ...
PW-VP50 CT Polarity checker is the favorable meter which can be used for field CT and transformer polarity test in power plants, substations and any other application which may need to check the polarity. There are 2 units included in PW-VP50. One master ...
... supplier and the purchaser Increase the stability of merchantable coal quality, as well as revenues for suppliers using Portable Coal Tester Prevent unqualified coal into the factory and avoid loss for coal customers ...
RAEM1 system is a complete full function single channel AE system not only for remote wireless long term non-destructive monitoring applications but also for standalone local detection purposes. RAEM1 is a single channel AE system integrated with AE sensor, ...
... tool which can be operated in the field by any personnel, expert or not.
Digital Optical Oil
Tester:
The GESERCO Rapid Optical Oil
Tester has a last generation infra-red sensor which combines measurement ...
... Overview
This
portable instrument measures DC winding resistance of transformers and inductive loads using current-source compensation and four-wire (Kelvin) measurement to eliminate lead/contact resistance errors. ...
Wuhan UHV Power Technology Co.,Ltd.
... Product overview
The UHV-10A is a DC winding resistance
tester designed for measuring DC resistance of transformer windings and high-power inductive devices. It reduces test time and operator workload by using advanced ...
Wuhan UHV Power Technology Co.,Ltd.
... , compact and
portable. Fast measurement speed and high accuracy. Equipped with resistance–temperature conversion function for direct RT analysis.
Product parameters
This transformer DC winding resistance
tester ...
Wuhan UHV Power Technology Co.,Ltd.
... density meter module, fully ASTM D4052 and ISO 12185 compliant • True Portability: Portable, rugged and lightweight: the perfect solution for terminals and mobile laboratories ...
ERAVAP FOR CRUDE OIL is the leading solution for high precision vapor pressure and density (ASTM D4052) testing of live and dead crude oils according to ASTM D6377, IP481 and GOST 52340. Its unique cell design allows high shaking speeds ensuring unrivaled ...
... Advanced portable device for analysing INGESCO® PDC.E series lightning rods. The INGESCO® Advanced ESE Tester constitutes an advanced tool for analysing electronic early streamer emission (ESE) lightning rods. This ...
... TL-205 is a UV/IR Flame Detector tester to verify response of UV/IR type of Flame Detector within a short distance. • Portable device • Specialized for Rezontech UV/IR type of flame detector • Suitable for hazardous ...
... TL-3000 is a IR3 Flame Detector tester for RFD-3000, RFD-3000X Model to verify its response within a short distance. • Portable device • Specialized for RFD-3000, RFD-3000X Models • Suitable for hazardous areas ...
... TL-305 is a IR3 Flame Detector tester for RFD-3FT, RFD-3T Model to verify its response within a short distance. • Portable device • Specialized for RFD-3FT, RFD-3T Models • Suitable for hazardous areas such as ...
... A compact handheld ultrasonic pulse velocity and pulse echo tester is designed for ultrasonic thickness measurements and flaw detection of concrete and reinforced concrete constructions and rocks. The flaw detector ...
... A compact, ergonomic and handheld ultrasonic pulse velocity tester for concrete inspection. The device is made of light-weight shockproof plastic and has two built-in transducers with dry-point-contact with fixed base ...
... Wireless Pile Integrity Test (P.I.T.) By using the reflected wave method, the instrument is used to assess the integrity of concrete pile and identify the extent and location of the pile defect. It can be used for testing drilled piles and hammer piles. ...
... THE NEW MEMBER OF OUR SMARTVLF® SERIES The HVA68TD is a truly compact and portable VLF test set that determines the condition of medium voltage cables with a voltage rating up to 46 kV (acc. to IEEE 400.2-2013). It performs VLF and ...
b2 electronics GmbH
... The HVA34-1 and HVA34TD-1 are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA34TD-1 device includes integrated Tan Delta diagnostics capabilities and features TD leakage current correction ...
b2 electronics GmbH
... b2 electronics high voltage generators very desirable in all classes at all voltage levels. The HVA30-7 is a compact and portable VLF test set which determines the condition of medium voltage cables. It performs VLF and DC testing, as ...
b2 electronics GmbH
... Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive ...
... The EMF-701A is a magnetic field tester manufactured by TECPEL®. This device is used for fast, dependable, and simple measurement of electromagnetic field radiation levels around home appliances, industrial equipment as well as power ...
... The PST-100 230V high frequency hand-held AC spark tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested. The PST-100 is widely used for ...
Buckleys (UVRAL) Limited
... The PST-100 110V high frequency hand-held AC spark tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested. The PST-100 is widely used for ...
Buckleys (UVRAL) Limited
... The ST-AC Pro’ AC high frequency portable AC spark tester provides a quick and effective means of inspecting thicker coatings and linings. It is particularly useful for checking butt-welded and overlap joints on plastic ...
Buckleys (UVRAL) Limited
... test / measuring range: 0 - 600 mA • Wide-range power supply unit: 90 to 253 V, 50 Hz / 60 Hz The P 1800D ground bond tester combines ground bond and continuity testing in a single device. The P 1800D is ideal for fast, cost-effective ...
... provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the following tests ...
... testing, the Transmille 6080A battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. An ideal solution for reducing ...
... testing, the Transmille 5080 battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. An ideal solution for reducing ...
... • Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. • Auto-hold and Auto-data storage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • Memory and Read ...
TES Electrical Electronic Corp.
... • No Auxiliary Electrode Needed • Leakage Current: 0.3mA - 30A, True RMS • Jaw Diameter : 23 mm • Programmable Hi and Lo Alarm • Data logging capacity 116 records • Programmable Data Logging: data logging interval 1 to 255 sec. • Auto-power-off ...
TES Electrical Electronic Corp.
... • No auxiliary electrode needed • Leakage current measurement: 0.3mA ~ 35A, True RMS • Jaw diameter: 35mm • Programmable High and Low alarm • Programmable data logging • Data logging capacity: 116 records • Data logging interval: 1 to 255 sec. • ...
TES Electrical Electronic Corp.
... Pull-off Adhesion Testers Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. • Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583 • Environmentally sealed enclosure—weatherproof, ...
... Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. • Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583 • Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds ...
the best suppliers