... The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
DN: 96, 144 in
Pressure: 50 psi - 400 psi
Temperature: -40 °C - 1,093 °C
... existing valves. Bonnets can be pressurized or un-pressurized, and can be specified with optional flushing or drain ports. A back seat seal ring on all bonneted valves allows valves to be repacked without ...
DeZURIK
... UNF Purging Valve The BLD9243 Purging Valve provides a tire valve core in a lightweight minimum length housing. This valve may be used to purge or pressurize containers. ...
DN: 1 in - 2.5 in
... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...
Flow rate: 500 us gal/min
... piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal ...
Pressure: 0 bar - 315 bar
... The type UZSZ-8 is a bleeder valve that is used to remove pressure by force in port P. It is generated by a mechanical hydraulic system. This valve is specifically manufactured for base plate installation equipped with ...
Temperature: -29 °C - 545 °C
... AFC Double block and bleed ball valves (DBB valve) are widely used in power, petrochemical, metallurgical, marine, petroleum, natural gas, gas, pharmaceutical and other industries in the hydraulic system ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C
... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form of a Trap Module, ...
Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C
... extedned forward pushing excess product back into the dryer. • A nitrogen purge can be used to assist the sample from the sample chamber to the sample bottle. Intrusive Plug Valve Sampler • Intrusive sampler, the ...
Temperature: 330, 180, 265 °C
... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and valve ...
ASDevices
DN: 20, 25 mm
Pressure: 16 bar
DN: 25 mm - 150 mm
Pressure: 16, 10 bar
Temperature: 300 °C
... •The rising opening system breaks the sediment or crystallized layer on the bottom of the tank. •Mechanized in high alloy stainless steel. Specifications •Quality: ASTM A.351 Gr. CF8M (316). •Closing: Metal - Metal. •Control: Hand by wheel. •Stem ...
DN: 0.375 in
Pressure: 46 bar
Temperature: -40 °C - 120 °C
... • Differential valves are mounted on refrigerating and air conditioning installation oil receivers. • They maintain permanent oil receiver overpressure versus the compressor sumps in order to ensure constant oil distribution to the ...
CARLY
... two-way ball valves. They are commonly used in food processing and wine industry. The products can also be modified to introduce a variety of features that are not included in the catalog, such as the standard threads and ports to drain ...
DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C
... The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures from -40 ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C
... of GAUGES VALVES: Option with purge Option with check flange with sealing plug to fit a standard pressure gauge. Option with M20x150 test bore Pneumatic piston valve. Benefits Pressure ...
DN: 0.5 in - 20 in
Pressure: 1,500 psi - 15,000 psi
... The DB&B PLUG VALVES provide the same PLUG VALVES features, with the addition of the “Double Isolation” feature, with a body bleed in between the two plugs. Valves “Face to Face” follows ...
DN: 15 mm - 150 mm
Temperature: -20 °C - 200 °C
... 10000PCS/Mouth 2 PCS Side Entry Industrial Turnnion Mounted Ball Valves JIEYU Valve manufactures some of the most dependable cast and forged steel Ball Valves in the industry. Our products ...
Pressure: 0 psi - 40,000 psi
Temperature: 0 °C - 49 °C
... regulate the closing of the Automatic Air Bleed Valve. By turning the screw clockwise, the valve will require more flow to close. Turning the screw counter-clockwise, will reduce the amount of flow needed ...
DN: 0.5, 0.375, 1 in
Pressure: 1,500,000 Pa
Temperature: -15 °C - 50 °C
... working pressure: 1.3 MPa Circulation medium: Fluid, air Valve open /closed time ≤ 7 seconds Rated voltage: AC/DC9-24V AC110-230V (Optional ) Keeping valve open time: 0 H: 0M: 0S --99 H 59 Keeping valve ...
DN: 8 mm - 300 mm
Pressure: 400, 1,000 psi
Temperature: -46 °C - 287 °C
... Series 7000 & 8000 ball valves offer the highest flexibility in selection of end connections, seat materials and three piece design. To meet customer demands for a valve with the widest possible range of applications, ...
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 130 °C
... venting valves remove air or gases from systems or pipelines without requiring an external energy input. When a system is drained they act as venting valves. The EB 1.12 bleeding/venting valves are compact ...
MANKENBERG GmbH
Pressure: 1 bar - 40 bar
Temperature: -10 °C - 150 °C
Flow rate: 800 l/min - 3,500 l/min
... Stainless steel quick exaust valve series Material and components: - body in stainless steel AISI 316 L - o-ring in Viton (FPM) ou PU - other parts in stainless steel AISI 316 Applications : chemical and food industries - working ...
DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C
Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)
DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C
... PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three valves ...
Pressure: 60 psi - 100 psi
... Positive Displacement Dispense Valve with Microdispense Nozzle Outlet The MV250 Positive Displacement Valve is a true positive displacement metering valve capable of dispensing small volumes of material ...
DN: 0.75, 0.5 in
Pressure: 10,000 psi
Temperature: 200 °F
... number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation ...
NOSHOK
DN: 0.25 in - 4 in
... model 93 is a range of high specification yet low cost Double Block and Bleed Valves for instrumentation applications that are available in any combination of Ball or Needle Valve assemblies. The units ...
Budenberg
DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -15 °C - 110 °C
... comply with future European regulations about drinkable water. The nickel free inside surface and all its components make the valve suitable for drinking water. Application fields: The ASTER ACS series is used in drinking water distribution, ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 690, 420, 206 bar
Temperature: -70 °C - 500 °C
... Customer-specific combination of valves and instruments (instrument hook-up) on request Description of the block-and-bleed valve With 2- valve manifolds, the block-and-bleed version is standard. ...
... integrated quick-release
valve to enable rapid actuation or bail-off of train brakes.
Key features
- Pneumatic control valve designed for locomotive braking systems
- Integrated
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure range up to 4200 ...
Pressure: 1,400 bar
... MULTI-COUPLING SYSTEM S.r.l. designs and manufactures oil-hydraulic and hydrodinamic groups and plants for the most varied industrial sectors and for specific applications. The company was established in Legnano (MI), but soon the development of the ...
Pressure: 500 bar
... of the purge valve GAV Trouble-free The melt channel rheology of the purge valve GAV is optimized and thus ensures an even melt flow. Straightforward The melt flow can be diverted ...
DN: 140, 129 mm
Pressure: 4, 6 bar
Temperature: 0 °C - 40 °C
... MULTIFUNCTION VALVES ACCESSORY Multifunction valve for pressure, safety, anti-syphon, bleed. Fittings for different hose diameters. ...
the best suppliers