Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds the tube on the external diameter and releases ...
A&T Fluid solutions
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
... All-metal construction Exclusive stainless steel tongs Perfect air tightness even in the presence of extreme pipe curvatures Perfect sealing of the tube even in the presence of shocks and vibrations Quick couplings are so called because they allow ...
A&T Fluid solutions
Diameter: 4 mm - 12 mm
Operating pressure: 1 bar - 16 bar
... Construction entirely in AISI 316L stainless steel Perfect air tightness even in the presence of extreme pipe curvatures Perfect sealing of the tube even in the presence of shocks and vibrations Various types of gaskets available depending on the field ...
A&T Fluid solutions
Operating pressure: 10 bar
... Compression fitting for copper, precision steel and stainless steel tubes Material - Nickel-plated brass,Coated brass Material moulded seal - EPDM Material clamping ring - Brass blank Max. operating pressure - 10 bar Max. operating temperature ...
Operating pressure: 10 bar
... Compression fitting for copper, precision steel and stainless steel tubes Compliance - UBA Material - Nickel-plated brass Max. operating temperature drinking water - 95 °C Max. operating temperature heating - 120 °C Registration number ÜA - R-15.2.3-21-17214 ...
Operating pressure: 10 bar
... Compression fitting for plastic and metal composite tubes Material - Nickel-plated brass Material moulded seal - EPDM Material clamping ring - PA Material support sleeve - Brass blank Tightening torque - 40 Nm Max. operating pressure - 10 bar Max. ...
Diameter: 0.25 in - 2 in
Operating pressure: 345 bar
... Their “airless valve shut-off design” greatly reduces air admixture! Ideal for hydraulic lines with larger pressure fluctuations. • Locking mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact. • ...
Diameter: 0.38, 0.5, 0.75, 1 in
Operating pressure: 350 bar
... Their “airless valve shut-off design” greatly reduces air admixture! Ideal for hydraulic lines with larger pressure fluctuations. • Locking mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact. • ...
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...
UFLOW AUTOMATION
Operating pressure: 0 bar - 80 bar
... Clamp to compression fitting The Clamp connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does not require ...
C.Matic S.p.A.
Diameter: 4, 6, 8, 10, 12 mm
Operating pressure: 0 bar - 10 bar
... Flow Control with acetal push-in fitting and handwheel regulation Push to Lock flow controllers represent the state of the art in terms of user friendliness and reliability. Push-to-Lock technology makes flow adjustment by hand much faster with no need ...
C.Matic S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting tightness are made possible by ...
C.Matic S.p.A.
... Overview
- 7102L Stainless Steel 316L union cross family including long‑arm union, elbow, tee, cross and butt‑weld fittings for ultra high purity gas and fluid distribution systems.
- Material: Stainless Steel 316L (SS 316L) for
Diameter: 4 mm - 12 mm
... Overview
SPAC AP-Series (grey) and EP-Series (black) push-in fittings for pneumatic tubing. Compatible with polyurethane (PU) and nylon tubing. Product range includes connectors, elbows, tees and multi-connectors with BSP threaded ports (G1/8–G1/2), ...
... 316 Stainless Steel Solid plugs are commonly used throughout various industries for processes that need to be sealed to prevent any contamination & provide excellent corrosion resistance. Whether you are closing a process, using as a plug for a thermowell, ...
PUSHNA INTERNATIONAL
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to waste and water applications across ...
PUSHNA INTERNATIONAL
... Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to waste and water applications ...
PUSHNA INTERNATIONAL
Diameter: 3 mm
... British Parallel (BSPP) Equivalent to European G Thread 1/16” BSPP Fittings ...
Temperature Technology Ltd
Diameter: 1 mm - 8 mm
... British Parallel (BSPP) Equivalent to European G Thread 1/8” BSPP Fittings ...
Temperature Technology Ltd
Diameter: 1.5 mm - 8 mm
... British Parallel (BSPP) Equivalent to European G Thread 1/4” BSPP Fittings ...
Temperature Technology Ltd
Operating pressure: 40 bar - 250 bar
SERTO has developed the new SERTO Selection product range to meet the highest requirements for tightness and cleanliness in stainless steel connecting components. SERTO Selection stands for ultrasonically cleaned, lubricant-free stainless steel connections ...
Diameter: 16 mm - 110 mm
Operating pressure: 12.5 bar - 16 bar
NORMA® Compression fittings are made of polypropylene for high-and-low density polyethylene tubing, diameters 16 to 110. Maximum service pressure: PN 16* bar from diameter 16 to diameter 63 – PN 12.5 bar from diameter 75 to diameter 110. DOES NOT INCLUDE ...
NORMA GROUP
Diameter: 4 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar
... STRAIGHT MALE ADAPTOR “UNIVERSAL SHORT” For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. It is the icon of quality, reliability ...
AIGNEP
The grommet hose connectors of the E10 series are mainly used for thick-walled hoses or where there are no push-in fittings for the hoses. The hoses are fastened here by means of hose clamps. Our E10 series is available in four different versions: brass, ...
Timmer GmbH
Diameter: 4.6 mm - 22 mm
... ELSA push-in fittings offer a safe solution for every connection. Their versatility, flexibility and durability ensure maximum effectiveness. The push-in technology enables maximum time savings through fast maintenance work. The numerous material options ...
Diameter: 10, 28, 15, 22 mm
Operating pressure: 10, 5, 2 bar
... Quickly and securely connects equally sized pipe to form a 90° pipe bend JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist ...
JOHN GUEST
Diameter: 40 mm - 250 mm
Operating pressure: 40 bar - 250 bar
When connecting RTP / TCP reinforced pipes, steel compression end fittings are usually considered because non-metallic fittings cannot withstand such high working pressure. When connecting RTP / TCP reinforced pipes, the steel compression type end fittings ...
Diameter: 0.125 in - 0.5 in
Operating pressure: 150 psi
Bimba’s composite fittings are ready to use, allowing easy, tool-free assembly and providing optimum flow. Straight fittings feature internal and external hexagons to reduce fatigue. Releasable stainless-steel grab rings provide excellent grip on nylon ...
Bimba
DAYU Irrigation Group Co., Ltd. was established in 1999. It is a national high-tech enterprise based on the Chinese Academy of Water Sciences, the Science and Technology Promotion Center of the Ministry of Water Resources, the Chinese Academy of Sciences, ...
DaYu Water-saving Group Co.,Ltd.
Diameter: 40 mm - 120 mm
VLS Components offers an extensive range of garolla stainless steel fittings, comprising a versatile selection that includes clamps, plugs, caps, conical and cost-effective reducers, gaskets, hose nipples, tees, and bends, all meticulously crafted to ...
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
... HA Technopolymer Push-In Fittings CHARACTERISTICS Temperature-20 80 °C (based on the type of tube) Fluidcompressed air, vacuum Max pressure15 bar Working pressure-0,99 -5-10 bar Bodytechnopolymer Fixing elementsnickel-plated brass with O-ring ...
UNIVER Group
Diameter: 38 mm - 65 mm
Operating pressure: 10, 16 bar
... Normative Regulation : According BS 336 requirements Gaskets Material : NBR Connection Mechanism : Male goes into Female , activating the safety handles ...
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Please note the permissible working pressure of the hose used . For Compatible hoses see chapter : Hose - HOS . Other O-Ring materials upon request : B = NBR , FDA - Compliant ; E = EPDM , FDA - Compliant ; Z = FFKM ( Kalrez )
Diameter: 10 mm - 50 mm
Operating pressure: 10 bar
... • PP Compression Fittings for PE pressure piping applications. • Injection moulding. • Perfect sealing in all conditions. • Fast & reliable connections. • Tested and approved by the main testing institutes worldwide. • Applications: irrigation, industry, ...
Diameter: 6 mm - 19 mm
... Multi-way connectors can be manufactured in the shape of Y-, T- and crosspieces in combination with all fittings of our standard programme. Materials: steel, zinc plated, brass passivated, brass, chrome-plated, stainless steel and plastics ...
Diameter: 14, 36 mm
... Hose coupling Ø36mm, 3 Outlet Ø14mm Order-No.: 5107281 ...
the best suppliers