DN: 25 mm - 80 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C
... •Sample always representative: sampling from the main flow •No falsification of the sample through residual media: design cavity-free •High safety through PFA lining and bellows seal •Representative sampling ...
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: -60 °C - 225 °C
CAPRO range sampling systems meet the high quality demands and technical safety requirements of the chemicals industry Sampling of liquid substances and their mixtures in the chemical and pharmaceutical ...
DN: 34, 25, 50.5 mm
Pressure: 12 bar
Temperature: 150 °C
Characteristics: Side pipe sanitary sampling valves are designed for sampling of liquids on pharmaceutical, chemical, F&B and cosmetics products. O-Ring closing system. Documentation: ...
DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C
The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions ...
FAMAT
DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
... Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical ...
ERREESSE srl
Pressure: 0 bar - 6 bar
Sampling valve/Sampling system Safe and sterile withdrawal of product samples - Optional design as fixed valve or as flexible sampling system - Valve ...
DN: 0.5 mm - 12 mm
Temperature: 260, 550 °C
The SchuF is designed with a wide range of sampling valves that cater to the refinery, pharmaceutical, good chemicals, biochemical, plastics and polymer industries applications. These tools are normally ...
... Ball Valve Quick Details: Model NO.: Q41F Type: Floating Ball Valve Function: Blow-Down Valve Temperature: Normal Temperature Application: Industrial Usage, Water Industrial ...
DN: 15 mm - 400 mm
Pressure: 10, 16 bar
... industry,civil building,etc. Description： - Name of product - PVC Sampling Valve Main material - PVC-U/UPVC/PVC Valve color - Dark grey body and red handle; ...
DN: 10 mm - 15 mm
Pressure: max 6.0 bar
The VESTA® sampling valve is used for aseptic product sampling from pipes or tanks. The VESTA® sampling valve prevents product contamination, thus keeping ...
GEA Tuchenhagen
DN: 25 mm - 40 mm
Pressure: 10 bar
The TP sampling valve is used to get representative samples from pipe lines or tanks where occasional sampling of 0-8% consistency fluids is required or for calibration of continuous ...
... compared to our competition. BIOFLO® II diaphragm valves are compact, forged, and lightweight valves designed to meet the stringent requirements within high purity systems. Applications include sampling, ...
Top Line Process Equipment Company
Pressure: 300 psi
Temperature: 149 °C
Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is ...
Pressure: 2.5 bar
... Control with or without a PC Features Fluid switching & sampling The 2-SWITCH™ can be used for fluid switching or sampling depending on the direction of flow. When 2 liquids are coming into the valve, ...
FLUIGENT
DN: 25 mm - 80 mm
... Low cost of ownership Jamesbury™ Series 33R ball valves are perfect for applications where positive, long-lasting shutoff is required. Ideal for vent, sampling, and gauge locations, these valves ...
Pressure: 0 bar - 150 bar
QYF-2R sampling valve is used for calibration gas cylinder sampling. This valve could directly connected with cylinder and easy to opearate It is for corrosive gases: ...
DN: 20 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C
... Aseptic Sampling Valve is designed to be installed in tanks and reactors. It can also be used for food preparation and pharmaceutical operations. This device ensures absolute drainability without dead ...
AERRE INOX Srl
... requirement then any of the Budenberg ranges of Double Block and Bleed Valves including type 98 one piece, MV Modular type or Monoflanges can be fitted with either an Injection Quill or Sampling Probe ...
Pressure: 10 bar
Temperature: 135 °C
Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve ...
GEA Procomac S.p.A.
DN: 0.25, 0.125 in
The iPolymer PTFE Sampling Metered Valve (SMV) is designed for use in high purity water and aggressive chemical applications. This unique manual actuated metering valve is design for ...
... design allows using an arrangement of ball valves and/or needle valves. Injection valves have also an integrated non-return valve to prevent bi-directional flow. The ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
... expertise in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in ...
... Sample Valve (5157A Model): Ideal for general sampling, the standard sample valve can be quickly installed on the pipe line or container. The valve clamps into position. ...
Hygienic and convenient solution for sample taking The sampling valve GSV allows the operator to extract a sample of the product from the production line or reactor and safely store it for transportation ...
... solution Supply solution for closed transfer of pharmaceutical materials Split butterfly valve (Alpha Beta valve), is made up of an active and a passive split valve. It is produced ...
HANGZHOU GEEVO TECHNOLOGY CO., LTD.
Please specify:
Help us improve:
remaining