Screw actuators

Force: 50 kN - 160 kN
Speed: 0.04 m/s - 0.24 m/s

... version with ball screw spindle drive, increased load rating: rotating spindle, lifting cylinder Circumferential backlash basic gearbox <12 arcmin Input speed up to 5000 min-1 Linear speed: - trapezoidal spindle ...

Stroke : 50 mm - 400 mm
Rod diameter: 35, 45 mm
Torque: 0.48 Nm - 7.2 Nm

... control Solidity improvement through using angular bearing to one's load + roll structure Selectable drive shafts: Ball Screw or TM Screw Enables position control at various points, unlike pnuematic ...

Stroke : 50 mm - 500 mm
Force: 50 N - 1,700 N
Speed: 100 mm/s - 500 mm/s

... Small electric cylinders for high performance in speed and strength, based on best on the market small ball screw system embedded on proprietary profiles having anti-rotations feature. Available in ...

Stroke : 25 mm - 50 mm
Force: 25 N
Speed: 0 m/s - 0.03 m/s

... are miniature, motorized linear actuators with 25 N thrust and 30 mm/s speed capabilities in a compact size. Available in either 25 or 50 mm travel, these actuators are designed to replace the standard micrometer head ...

Rod length: 33 mm - 2,000 mm

... Linear actuators with ball screw drive Options • various carriage lengths • multiple carriages possible Features • high quality ball screw • loadable up to 50 ...

... Electromotive actuators correct the position of the material web precisely and almost without delay. - Connection ...

Stroke : 100, 125 mm
Torque: 28, 68 Nm
Speed: 5, 2 m/s

... Overview Series ESW heavy-duty electric linear actuators feature a dual-rail, low-profile design available in ball screw or belt-driven configurations and in two sizes. The ESW ...

Force: 302, 400, 703, 1,040 N
Torque: 0.013 Nm - 0.031 Nm
Operating Temperature: 0 °C - 82 °C

... non-captive lead screw linear actuators integrate the motor with the nut so the lead screw passes completely through the motor and rotates while translating axially. This architecture supports virtually ...

Stroke : 40 mm - 5,000 mm
Force: 0.3 kN - 1,000 kN
Speed: 100 mm/s - 1,000 mm/s

... Lim-Tec scissor lift electric actuator:Overall accuracy of 0.05 mm; Maximum rated load of 5 tons; Speed of 1 m/s, 100% can work continuously; Precision thrust control accuracy is 5%, the closed-loop control accuracy is ...

Stroke : 1,000 mm
Force: 1.2 kN - 123 kN
Speed: 2.3 mm/s - 93 mm/s

... Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable). BSA Series ball screw drive linear actuators: 11 standard sizes available Ball ...

... Can-Stack Linear Actuators Can-stack linear actuators contain a threaded rotor with a lead- screw shaft able to drive linear motion in both directions. The pressed steel body encloses ...

Stroke : 141 mm - 350 mm
Force: 3,000 N
Speed: 0 mm/s - 30 mm/s

... The little powerhouse. For universal use, thanks to the turned guidance profile and the extremely small motor housing. • Load capacity: max. 3000 N push / max. 3000 N pull • Adjustment speed: max. 30 mm/sec. * • Stroke length: max. 350 mm * depending ...

... LoPro linear actuators are an actuated linear motion system based upon proven DualVee guide wheel technology for smooth and quiet motion over long lengths. Actuation options include AT series belt, ANSI roller chain, ...

Stroke : 13 mm
Force: 10 N - 30 N
Speed: 0 mm/s - 1.5 mm/s

... Linear Actuator for Applications in Ultra-High-Vacuum and Cryogenic Environment Technical Details • 2-phase stepper motor, size 25 mm • Motor voltage 24 VDC • Linear speed 1.5 s/mm • Linear stroke 13 mm • Positioning accuracy ...

Stroke : 40 mm - 1,560 mm

... pressure servo actuator is widely used in material and components testing rigs. The common actuator is traditional technology with mechanical seal and guide, which is easy to be broken, heated. Our ML series Static pressure ...

Stroke : 12 mm - 40 mm

... Centering boss and locating hole for accurate positioning. Operating range of table is 0°~190° by angle adjusting screw. Compact design using double rack and single pinion. Hollow shaft standard for wiring and piping. ...

Stroke : 980 mm
Force: 100 N
Speed: 370 mm/s

... controlled by PIO signal. ST-59B is to adopt the design of driving controrl intégration, no need exterior driving. The electric actuator can be driven by power cable and communication cable, it has built-in absolute ...

... required, the Uhing®-linear drive nuts are a state-of-the-art alternative to hydraulic and pneumatic actuators, chain feeding systems and lead screws. ...

Stroke : 0 in - 0.945 in

... supplied with either a ball screw or acme screw, and either a servo or stepper drive system. Nook Industries can provide a complete system from one source including motor, drive, controller, and power ...

Torque: 0.33 Nm

... The AxialPower™ APPS17 series, manufactured by Electrocraft® is a linear stepper actuator utilized with a size of 17 nema that has a reliability along with a 47 oz-in or 33 Ncm torque. Furthermore, it has a rapid and powerful stepper ...

Stroke : 8 mm - 250 mm
Force: 55 N

... capability. • LPL series are compact and high force for the size. • Cost competitive alternative to pnuematic and ball screw actuators. • Programmable positioning, speed and force. • Ability to ...

Force: 1,000 N - 3,700 N
Speed: 0.01 m/s - 0.04 m/s

... rotation Different type of internal thread for through going spindles Good self-locking properties Fast and powerful Order spindle separately Variant key The variants are formed by different internal thread ...

Stroke : 0 mm - 4,450 mm

Suited for the conveyance in various situations due to the free union of the modules. [Horizontal load capacity (single axis: 5 to 100kg. Combination: single axis to 4 axes.

Force: 12.5 kN - 100 kN

... SDA is a rigid but modular direct drive linear actuator. The actuators can operate with faster linear speeds and higher duty in high load conditions. The SDA can be used as a single drive linear actuator. ...

Stroke : 305 mm
Force: 67 N
Torque: 1.7 Nm

... NEW! Performance in an Ultra-Compact 2-axis Design. Designed for easy integration in OEM assemblies, the Haydon Kerk Z-Theta offers linear + rotary point to point motion in an compact footprint. Unlike in-house component-up designs requiring engineering, ...

... synchronous motor/ actuator offers an economical choice of controlled linear motion for pulling, pushing, or lifting. The rotor assembly contains a nut which accepts a standard 1/4" diameter, 16 TPI, RH Acme screw giving ...

Stroke : 50 mm - 1,000 mm
Force: 1 N - 16,000 N
Speed: 5 mm/s - 138 mm/s

... HTW760 industrial linear actuator is a very powerful actuator designed for various app such as agricultural machinery, construction machinery, and industrial machinery. Difficult applications Require equally demanding ...

Stroke : 800 mm
Force: 500 N - 25,000 N
Speed: 0 m/s - 0.12 m/s

Stroke : 500 mm - 1,000 mm
Force: 2,100 N - 10,000 N
Speed: 120 m/s - 6,000 m/s

... ■wormgear ■acme screw or ballscrew ■chrome plated Steel push rod ■life time grease lubrication ■duty cycle S3 30 % (5 min) at 30°C ■encoder on demand ■limit switches see HG/AL4-F ■for any spécial duty please contact our office ...

Stroke : 168 mm - 366 mm
Force: 600 N - 1,600 N
Speed: 5 mm/s - 25 mm/s

... Actuator Type 110 D DC Actuator with worm gear drive. Rotating lead screw with spindle nut. Suitable for controlled inhibited operation with max. current 6 Amps. Additional external end switches preferred. ...

... screw) or MSK (ball screw) versions. These actuators cover a range of displacement forces ranging from 4000 to 50,000 N for speeds ranging from 5 to 120 mm / sec. ...

Force: 500, 1,000 N

... ball screw, actuator tail integrated encoder, real-time feedback screw position, without any return switch, limit switch. The driving CX type is fixed by four screws before and after ...

Stroke : 57 mm - 108 mm
Force: 2,300 N
Speed: 12 mm/s

... Linear Actuators ANT-63 A powerful electric actuator designed for yacht trim tabs. Precision-engineered for quiet operation, the Antuator trim tab actuator combines a non-hydraulic, ...

Stroke : 50 mm
Force: 300 N
Torque: 9.11, 13.67 Nm

... High Rigidity High Load Capacity Fast Response Speed Adaptive Pushing Description 1. The data is sourced from the actual test results in the 25°C laboratory. 2. If you require a product with a brake, please contact your sales representative ...

Stroke : 55 mm
Force: 500 N
Speed: 100, 292 mm/s

... short-stroke actuator is designed for precise positioning with a max. force of up to 1,500 N. The integrated ball screw extends the motor’s service life – even when run at high speeds and loads. With ...

... positioning of pressing tools. The drive is made by service free, brushless torque motor. The force translation is made by ball screw spindle. The position control of the stamp is solved by an incremental, magnetic measuring ...

Stroke : 14 in
Force: 4, 45 N
Torque: 9.15, 7.75 Nm

... Description NEMA 11 Precision Linear Actuator, Double Stack Motor, Travel Per Step, 0.000125" ...

Force: 31,137, 17,792 N

... The actuators are designed with features that provide a variety of benefits: Ball screw actuator design. They provide efficiency in terms of position accuracy. Versatile as they ...

Stroke : 67 mm - 1,380 mm
Speed: 0.27 m/s - 1.12 m/s

... Reduced price, only valid for stock items. The linear actuator GKA4270-600-12N-P5 is a compact positioning module with a rail guide and a precision ball screw. The U-profile made of Aluminium (steel in the GKS series) ...

... simple installation. The materials used to manufactured the variouscomponents pretect them against water, dust and rust. The electric motors are protected by heat probes. The mechanical gears, with components lubricated using a special ...