Self-priming pumps

Flow: 75 l/min
Pressure: 0 bar - 8.4 bar
Head: 84 m

Flow: 0 m³/h - 500 m³/h
Pressure: 0 bar - 150 bar
Head: 0 m - 120 m

... maintenance for use continuous (abandon of mechanical seal pumps) Design features Pumps of the series CNV MAG-M are vertical single-stage volute casing pumps with closed impeller. Close coupled pumps ...

Pressure: 200 psi - 4,500 psi

... This versatile pump series is aimed at operating in both industrial and mobile applications. With its continuous operating pressures ranging from 200 to 4500 psi, and shaft speeds up to 3200 rpm at atmospheric inlet conditions, this pump ...

... controls Less downtime Simple maintenance The new “vMAX™” line of vertical cantilever hard metal pumps has been developed for conventional clean up sump duties and process duties that require reduced degradation ...

Flow: 0 us gal/min - 1.5 us gal/min
Pressure: 0 bar - 12 bar

... The Gearchem pumps are designed for continuous on duty use. They are constructed out of the strongest material available to provide superior chemical resistance and assure long life. Designed to handle a variety of process liquids including ...

... Description USB connectable plug&play syringe pump for jfermi bioreactor ...

Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C

... ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering on air consumption), ...

Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C

... plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump sizes, hydrolub® can be configured to suit customers’ specific requirements and therefore, are far superior ...

Flow: 2 m³/min - 45 m³/min
Head: 60 m - 120 m
Power: 1.5 kW - 15 kW

Flow: 21 m³/h
Pressure: 25 bar

... 1500mm2/s, and the speed can be reduced to 50000mm2/s. 2CY gear pump structure features: This series of gear pumps are mainly composed of gear, shaft, pump body, pump cover, ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

... The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors due to their ...

Flow: 5 l/h - 1,250 l/h
Pressure: 72 bar

... dosing pumps offering an efficient, reliable and low maintenance solution for applications where low flow, accurate dosing is required. The new Mono dosing pump provides a smooth pumping action with no pulsation and ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 5 bar

... Steimel seawater pumps are used for cooling via heat exchanger of high and medium-speed diesel and gas engines. The gear driven pump is flange-mounted to the engine’s gear box. Belt driven pump is available ...

Flow: 10 m³/h - 750 m³/h
Head: 3 m - 48 m
Power: 1.1 kW - 90 kW

... Design Features • Stable performance, reliable operation. • Rapid self- priming, high suction head • Back-pull-out construction: Convenient for maintenance and troubleshooting. Daily maintenance can be performed ...

Flow: 12.6 m³/h - 5,400 m³/h
Pressure: 0.6 bar - 7 bar
Head: 6 m - 68 m

... SH pump series are horizontal, cantilevered, single-stage centrifugal pump. It is designed for pumping tough slurries which is high-abrasive or corrosivre and high-density. The horizontal pumps maintain ...

Flow: 8 l/min

... 22095 RINOX 95 Single-action hand-operated stainless steel pump. Output 8L/min. Standard equipment for oil and antifrezee: rigid filling pipe, plastic ring nut for drums, PTFE Teflon gasket. ...

Flow: 10 m³/h - 800 m³/h
Pressure: 6 bar
Head: 4 m - 40 m

... UKM - S series pumps are self- priming centrifugal pumps with upper suction flap. • Since they are self- priming pumps it is only necessary ...

Flow: 1 l/h - 15 l/h
Pressure: 15 psi - 145 psi
Power: 28 kW

... Manual Solenoid Diaphragm Metering Pump JLM series solenoid diaphragm metering dosing pump is effective and reliable digital pump. The solenoid shaft is sucked by the magnetic wire ...

Flow: 5 l/min - 900 l/min
Power: 120 W

... PP-PVDF-INOX-ALUMINUM Self-heating Maximum range from 5 to 900 l/m Attacks: Rigid duct flexible piping Flanged Operating Principle The magnetic pumps are characterized by the absence connection between ...

Flow: 325 l/h - 1,930 l/h
Head: 6 m - 28 m
Power: 0.37 kW

... These pumps can withstand wide voltage fluctuations from 180-240 volts. The motor body is of aluminium extruded. The impeller is of forged brass and delivery casing is made of cast iron. These pumps are very useful in ...

Flow: 40 l/min
Pressure: 1.6 bar

... Diaphragm pump especially designed for transferring AdBlue Motor: Ventilated in 220v Max. working pressure: 1,6 bar Flow: 40 l/min (220v.) Self priming: 4 meters IN / OUT: 1” Female Handle including ...

Flow: 600 m³/h
Pressure: 16 bar

... single impeller centrifugal pump joined by a spindle to a completely enclosed asyinchronous motor. External ventilation is available to obtain the motor cooling and the casing of pump is equipped with fastening feet for ...

Flow: 36 m³/h - 120 m³/h
Head: 6.5 m - 44 m
Power: 3 kW - 22 kW

... Self- priming close coupled centrifugal pumps suitable for pumping sandy and muddy waters. Iec standard electric motors, IP 55 protection degree and insulation class F. ...

Flow: 0 l/min - 6,055 l/min
Pressure: 0 psi - 64.9 psi
Head: 0 m - 46 m

... Industrial 6" wet priming de-watering trash pump provides the proven performance you have come to expect from Multiquip. The pump is now outfitted with a compact, powerful, and efficient HATZ Tier IV ...

Flow: 0 l/s - 34 l/s
Head: 0 m - 24 m

... for positive self - priming, the GP 80 incorporates the unique Sykes Univac vacuum system. This enables the pump to prime and re-prime fully automatically from dry. The GP 80 is powered ...