Single-stage pumps

Flow: 4,200 l/min
Pressure: 17 bar

... mounting. It is a single stage centrifugal design, featuring a low pressure impeller on a stainless steel shaft. The pump is supplied with a ready-to-use mounting platform for ease of ...

Flow: 0 m³/h - 13,000 m³/h
Head: 0 m - 82 m

Horizontal and vertical single stage solids handling pump DISCHARGE & PERFORMANCE • Delivery up to 900 mm FEATURES • Solids handling up to 300 mm • Mechanical seal or gland ...

Flow: 0 l/min - 230 l/min
Pressure: 6.8, 6, 5 bar
Power: 8 kW

... Floating Fire Pump Product overview The portable high pressure floating fire pump is a new generation of high-head ultralight pump which developed by our company. The pump ...

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m

... all-round talent for rough service conditions in all industries NP standardized chemical pump As a universal all-round talent, the MUNSCH NP standardized pump has been rendering decades of excellent ...

Flow: 26 l/min - 1,893 l/min
Pressure: 6.9, 8.6, 12.1 bar
Fluid temperature: -32 °C - 115 °C

... of the Iron Line of sliding vane pumps, these Blackmer® pumps are the market’s only alignment-free, reduced-speed positive displacement pumps. They are suited for both ...

Flow: 27 m³/h - 829 m³/h
Head: 13.7 m - 86 m
Power: 2.2 kW - 100 kW

The structure is single stage centrifugal pump, the impeller divides to single-suction impeller and double-suction impeller or single-stage ...

Pressure: 30, 60 bar
Length: 240 mm
Width: 145 mm

TestPower HP140 Flow rate: 62 cm³/Hub Dimensions: 240x145x610 mm

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

... Characteristic The CP range is a double-flow, split-case, diffuserless, single-stage or two-stage, replaceable slip rings. The in-line suction and impulse flanges are an integral part ...

Application Type FZ impeller single-stage pumps are used to pump clean and dirty water, municipal and industrial waste, as well as other liquids, depending on corrosion ...

Flow: 0 m³/h - 250 m³/h
Head: 0 m - 24 m
Power: 5.5 kW - 11 kW

... Field of application Swimming pool pump for water circulation and filtration as well as the operation of swimming pool attractions in public swimming pools. Design Non-self-priming, single-stage ...

Flow: 1,200 m³/h
Pressure: 16, 24 bar
Head: 160 m

Horizontal End Suction Pumps, design in accordance with ISO 2858. ​Materials : Cast Iron, Ductile Iron, Bronze, SS 304, SS 316 Flange : PN16/ PN 25 Applications : Petrochemical & Chemical Industry Pulp ...

Monostage centrifugal pumps with closed impeller according to ISO 2858 and 5199 Max flow m³/h 500 Max pressure bar 15

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 220 m

... abandon of mechanical seal pumps). Design features Pumps of the series CN MAG-M are horizontal single-stage volute casing pumps It is a modular ...

Flow: 400 us gal/min
Head: 200'00"

... Noise Level with Aurora Close Coupled Motors Vertical Center-Line Discharge Makes Pump Self-Venting, Avoids Vapor Locks and Minimizes Pipe Strain Case Wearing Ring Prevents Wear on Casing and ...

Flow: 2.5 m³/h - 600 m³/h

AY single two-stage centrifugal oil pump Model specification: 50 ay Ⅱ 60 x 2 b, 250 ays Ⅲ 150 c 50,250 -- suction inlet diameter (mm) A-- subrenovation Y-- centrifugal oil ...

Flow: 500 m³/h - 25,000 m³/h
Head: 15 m - 180 m
Power: 200 kW - 12,000 kW

Horizontal single-stage pump with a double-entry wheel with the ability to be installed in a vertical position for water, aqueous solutions, produced water, thermal power stations, nuclear ...

Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m

... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges ...

Flow: 130 m³/h
Pressure: 36 bar

Horizontal direct coupled Cryogenic Pumps CS and CBSD pumps are typically used in intermittent duty for road tanker loading.

Flow: 10.5 l/s - 400 l/s
Head: 25.4 m - 94.2 m

ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) ...

Flow: 5 m³/h - 3,500 m³/h
Head: 4 m - 105 m

• Single-stage, end-suction centrifugal volute pumps. • Main dimensions, compatible with EN 733 (DIN 24255) norm. A total of 45 designed pumps avaible in the series. • ...

Flow: 0 m³/h - 800 m³/h
Head: 0 m - 90 m

Kirloskar SHL solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog ...

Flow: 1,380 m³/h
Pressure: 16 bar

The single-stage centrifugal pump is designed to reach the ultimate interchangeability between the components. It is consist of an impeller that is dynamically and interchangeability ...

Flow: 39 m³/h - 390 m³/h
Head: 42 m - 105 m
Power: 5.5 kW - 95 kW

Close coupled pumps in compliance with EN733 - DIN24255 standards coupled to IEC standard electric motors through rigid coupling.

Flow: 400 m³/h
Pressure: 48 bar

... Nova Rotors, is a range of progressing cavity pumps. This pump is completely reversible and has a wide pumps range. It features a one stage stator with long pitch geometry ...