Single-stage pumps

Flow: 0 m³/h - 13,000 m³/h
Head: 0 m - 82 m

... Horizontal and vertical single stage solids handling pump DISCHARGE & PERFORMANCE • Delivery up to 900 mm FEATURES • Solids handling up to 300 mm • Mechanical seal or gland packed • Impeller ...

Flow: 0 m³/h - 168 m³/h
Head: 0 m - 80 m
Input diameter: 100 mm

... Hygienic centrifugal pump H1CP – single stage, non self-priming Reliable product feed in hygienic processes Easy and fast cleaning High surface quality due to parts made of solid ...

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m

... all-round talent for rough service conditions in all industries NP standardized chemical pump As a universal all-round talent, the MUNSCH NP standardized pump has been rendering decades of excellent service in corrosive ...

Flow: 68, 364, 526 m³/h
Head: 81 m - 128 m
Power: 185 kW

... is a vertical, single- stage, bottom suction and horizontal discharge centrifugal pump. The pump body is designed with an annular delivery chamber, the impeller is designed based on ...

Flow: 8 m³/h - 37 m³/h
Head: 7 m - 40 m
Power: 0.75 kW - 7.5 kW

... operation, the pump is refluxed and stirred, and mechanically crushed to prevent blockage. The YW pump is a single- stage single-suction, submersible centrifugal pump. ...

Pressure: 12, 6 bar
Fluid temperature: 160 °C
Weight: 12 kg

... and available in NBR, NBR light, FKM, EPDM, EPDM light, PTFE. Discharge pressure 6 bar at the single- stage and 12 bar with the two- stage pump tubes. The maximum viscosity of the ...

Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW

... equipment and work conditions. The pump consists of the following subassemblies: Central lubrication a tank with a grease feeding device, a drive train consisting of an electric motor, a single- stage ...

Flow: 18 m³/h - 504 m³/h
Power: 0.75 kW - 160 kW
Fluid temperature: -15 °C - 120 °C

... XBD-L Vertical Single- stage Fire Pump Series is used to deliver non-solid clean water and fluids similar with water in physical and chemical properties. It is mainly used for pressuring water supply in ...

Flow: 1.5 m³/h - 35 m³/h
Pressure: 0 MPa - 0.5 MPa
Power: 1.5 kW - 30 kW

... High speed emulsified pump type: single- stage multi-level Material: SS304 or SS316L Speed: 2900rpm Flow:0-1.5 to 0-35 T/h Motor Power: 1.5-30kw ◆ High-speed emulsifying pump ...

Flow: 5 l/s - 2,500 l/s
Input diameter: 100 mm - 700 mm

... pumping stations. The blockage-free PLEIGER centrifugal pumps of the PKR series are dry-installed single- stage wastewater pumps in the nominal width range from DN100 to DN700, which can ...

Flow: 0.25 m³/h - 1,300 m³/h
Head: 3 m - 230 m
Fluid temperature: -100 °C - 350 °C

... flow rates up to approx. 200 m³/h Single- stage centrifugal pump Heatability Single-part heating chamber system Very efficient heatability Only 1 entrance and 1 discharge connection Simple ...

Flow: 125, 100 l/min
Head: 29, 20, 27 m
Power: 0.75, 0.55, 0.37 kW

... Single impeller centrifugal pumps suitable to cover any small, medium or large capacity request; for domestic, agricultural and industrial purposes; with automatic water distribution through small and ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

... Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single- stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

... Characteristic The CP range is a double-flow, split-case, diffuserless, single- stage or two- stage, replaceable slip rings. The in-line suction and impulse flanges are an integral part of the lower ...

... Application Type FZ impeller single- stage pumps are used to pump clean and dirty water, municipal and industrial waste, as well as other liquids, depending on corrosion resistance of ...

Flow: 1,200 m³/h
Pressure: 16, 24 bar
Head: 160 m

... Horizontal End Suction Pumps, design in accordance with ISO 2858. ​Materials : Cast Iron, Ductile Iron, Bronze, SS 304, SS 316 Flange : PN16/ PN 25 Applications : Petrochemical & Chemical Industry Pulp & Paper Industry Fertilizer ...

... Monostage centrifugal pumps with closed impeller according to ISO 2858 and 5199 Max flow m³/h 500 Max pressure bar 15 ...

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 220 m

... abandon of mechanical seal pumps). Design features Pumps of the series CN MAG-M are horizontal single- stage volute casing pumps It is a modular configuration of ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... mechanical seals are available External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump ...

Flow: 2.5 m³/h - 600 m³/h

... AY single two- stage centrifugal oil pump Model specification: 50 ay Ⅱ 60 x 2 b, 250 ays Ⅲ 150 c 50,250 -- suction inlet diameter (mm) A-- subrenovation Y-- centrifugal oil pump S-- ...

Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m

... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges are suitable standard ...

Flow: 10.5 l/s - 400 l/s
Head: 25.4 m - 94.2 m

... ZGB(P) slurry pumps is horizontal cantilever single- stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date ...

Flow: 5 m³/h - 3,500 m³/h
Head: 4 m - 105 m

... • Single- stage, end-suction centrifugal volute pumps. • Main dimensions, compatible with EN 733 (DIN 24255) norm. A total of 45 designed pumps avaible in the series. • Single ...

Flow: 0 m³/h - 800 m³/h
Head: 0 m - 90 m

... Kirloskar SHL solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps. ...

Flow: 1,380 m³/h
Pressure: 16 bar

... The single- stage centrifugal pump is designed to reach the ultimate interchangeability between the components. It is consist of an impeller that is dynamically and interchangeability balanced. This machine ...

Flow: 400 m³/h
Pressure: 48 bar

... Nova Rotors, is a range of progressing cavity pumps. This pump is completely reversible and has a wide pumps range. It features a one stage stator with long pitch geometry to improve ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... Single- stage radial impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...

Flow: 15 m³/h - 35 m³/h
Power: 2.2 kW - 5.5 kW

... other industries. The SCP pump is a horizontal single- stage single suction centrifugal pump. The pump has the self-priming capability, not the bottom ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... The DV Series pumps are single stage, single suction vertical in-line centrifugal pump. The pump is radially split casing design and it is non self-priming. ...

Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m

... The Magnum XP pump is single- stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The ...

Flow: 2,600 m³/h - 3,000 m³/h
Head: 40 m - 65 m
Output diameter: 350, 450 mm

... RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge pump ...

Flow: 3 m³/h - 1,680 m³/h
Head: 4 m - 152 m
Power: 0.37 kW - 350 kW

... sprinkler & drip irrigation systems. About :The LBS series are non-self priming, horizontal, single- stage, centrifugal, end-suction back pull out long coupled pumps. ...

Flow: 0 m³/h - 110 m³/h
Pressure: 4 bar
Head: 0 m - 60 m

... Mixed rolled/cast AISI 316L (1.4404) stainless steel construction. Made up of three models with independent pump shaft and standard IEC electric motor. Design optimized to guarantee high levels of hygiene in the food, dairy, beverage, ...

Flow: 10 m³/h - 600 m³/h

... series single stage single suction cantilever type centrifugal pump is used to deliver clean water and liquids with similar chemical and physical properties as water but containing no ...

Width: 67 mm
Height: 345 mm
Weight: 9 kg

... applicationsIdeal for small volume pressure testingProven reliability, easy to maintain and robust Hand Pump Series The Hydratron Hand Pump Series Liquid Pump is a hand-powered spring-return ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... the basis of my country's digestion and absorption of foreign oil pumps , The basic structure is a single- stage single-suction cantilever foot support structure, the inlet of the pump ...

... DFEG-High Efficient inline circulating pump(Basic type) ...

Flow: 2.4 m³/h - 480 m³/h
Head: 1.5 m - 95 m
Power: 0.25 kW - 75 kW

... Construction Single- stage end-suction centrifugal pumps, with bearing bracket. The electropumps N, B-N, N4, B-N4 series comply with the European Regulation no. 547/2012 in force starting from 01.01.2013. Nominal ...

Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"

... TYPE MC Horizontal single- stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction ...

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

... priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating plants, etc, in thermal range of up to +90°C (+140°F). This horizontal ...