DN: 2 in - 24 in
... Disc Check Valves are non-slam wafer check connection type, making the valve as efficient, lightweight, compact, low cost operation fluid control device. With independent springs design, ...
DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C
... Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main features • ...
Swissfluid AG
DN: 2 in - 12 in
Pressure: 20, 24 bar
... Grooved swing type check valve that allows waterflow in one direction only.A hinged clapper remains open with water flowing in one direction, and automatically closes,with the help of an incorporated spring, when flow ...
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C
... Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and ...
JAECO Fluid Systems
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: 400 °C
... •Process line, product pipes, way out of pumps, fluid machinery. •The check disc valve close for the spring action when reduce the line pressure, getting a mild closing and avoiding the fluid recession and the surge ...
DN: 50 mm - 300 mm
Pressure: 16 bar
... OF MANUFACTURE EN 1074-3 CHECK VALVES MATERIALS BODY FIG.530 – S235JR CARBON STEEL EN 10025 FIG.545 – AISI316 STAINLESS STEEL EN 10088-1 DISC FIG.530 – S235JR ...
ACMO S.p.A.
DN: 50 mm - 300 mm
Pressure: 44.1 bar - 102 bar
Temperature: -20 °C - 100 °C
... Class 600 Carbon Steel or Stainless Steel Sure Check™ Valves Size: 2 to 12 in. (50 to 300mm) Description: Designed for liquids and gases where flow reversal can cause ...
DN: 50 mm - 1,200 mm
Pressure: 16 bar - 260 bar
... Valve Type: Wafer Check Valve Check Valve Body materials: carbon steel, alloy steel and stainless steel Manufacturing ...
DN: 1 in - 28 in
... any exterior. Materials: Hot-rolled or cold-rolled steel, stainless steel, aluminized stainless or custom request. Sizes: Diameters range from 1" up to 28" per Mercury Product Series ...
DN: 0.5 in - 4 in
Pressure: 40 bar
Temperature: -10 °C - 220 °C
... Spring loaded stainless steel check valve Diameters from DN015 - ½" to DN100 - 4" Wafer type, suitable for EN1092 PN6, PN10, PN16 or PN40 flanges Lengths according to EN558-1 series 49 (ex DIN3202 K4) To ...
DN: 0.5 in - 12 in
... API 6D Lift Check Valve Manufacturer: Lift Type Check Valves, BS 1868, API 6D, BS 5352, ISO 15761, 1/2-12 Inch, Class 150-2500 LB, BW, SW, Threaded End. Lift check ...
China MED Valve Co., Ltd.
DN: 40 mm - 900 mm
Pressure: 10 bar - 160 bar
... Bolted Bonnet or Pressure Seal Bonnet Coating: Standard Paint Coating Design Prohibits Galling or Scoring of Seating Surfaces Large-sizes Are Provided With Lifting Rings for Easy Hoisting One-Piece Disc Construction Designed to ...
wenzhou domos fluid equipment co.,ltd
DN: 15 mm - 300 mm
Pressure: 40, 16 bar
... It can be used horizontally or vertically. • With the help of a spring, loaded a more watertight and quicker sealing can be obtained. • Distance between sides according to DIN 3202 F-1. ...
Valvulas VS, S.L.
DN: 40 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
... environment-friendly no maintenance Aplications hot and cold water plants oil plants ...
DN: 0.125 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -29 °C - 400 °C
... Check valves, also known as one-way valves, non-return valves, or single-flow valves allow fluid to flow in the direction of the arrow but do not allow fluid to flow ...
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 220 °C
... The innovative springless check valve for clean applications. Maximum hygiene with no maintenance required. Tightness guaranteed in all installation positions, even vertical with downward flow. The patented YGROS ...
Ygros SRL
DN: 80 mm - 1,800 mm
Pressure: 0 bar - 50 bar
Temperature: -30 °C - 130 °C
... CLASAR®: the valve with high dynamic response, allowing the most effective protection against water hammer from pumps. Available in stainless steel and duplex construction on request. Check ...
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
... A check valve, or non return valve, is a valve that prevents the fluid from flowing backwards and ensures that it flows in only one direction. It can be used to prevent the loss of prime ...
DN: 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -25 °C - 180 °C
... swing check valve 3/8" inch female thread, body made of stainless steel 1.4408, disc made of stainless steel 1.4408 seal metall installation position: ...
NieRuf Gmbh
DN: 2 in - 24 in
DRAC ENGINYERS, S.L.
... Vatac Stainless Steel Check Valves are designed and manufactured strictly to International Standards API 6D, BS1868, ASME B16.34 or Equivalent, o reduce the flow resistance and pressure drop to the minimum ...
Vatac Valves (Wenzhou) Corporation
DN: 2 in - 36 in
... Globe Valves – Y-Pattern, Standard & Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check & Wafer Check ...
DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C
... Design ANSI B16.34,API6D,BS5351,DIN3337 Body Material Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.etc. NACE MR-01-75/NACE MR-01-03 Special Requirements Face ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
DN: 1.25 in - 3.5 in
Pressure: 10,000, 5,000, 3,000, 2,000, 15,000 psi
... Type H Back Pressure Valve (BPV) is a one way check valve, also known as a non return valve or NRV, which is used to safely seal tubing during installation of Christmas ...
DN: 0.25 in - 2 in
Pressure: 16, 40 bar
Temperature: -20 °C - 180 °C
... Description Check Valve Body Brass, Stainless Steel ...
DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 180 °C
... handling fresh,sea, waste water,steam,acids and alkaline liquid. • A minimum back pressure of 0,3 bar is required to keep the valve tight. ...
Doruk Endustri Ltd.
DN: 0.25 in - 2.5 in
Pressure: 0 psi - 6,000 psi
... Basic- Check® Valve is a versatile all-purpose, non-slam valve that provides reliable, low-maintenance service for a wide range of liquids, steam and gases at various pressure/temperature combinations. ...
DFT Inc.
DN: 0.25 in - 1 in
Pressure: 0 psi - 30,000 psi
Temperature: 0 °C - 49 °C
... The NuQuip® Model CV Series Check Valve is an in-line, piston style valve offering a zero leak design for applications requiring working pressures up to 30,000 psi (2,068 bar). The check ...
DN: 0.5 in - 40 in
Pressure: 0.4 bar - 20.7 bar
... 106 / 206-PR-C is used for pressure reducing and check valve which has 10 models. It has an excellent constant flow with drip-tight closing on the return flow and an isolation valve which is standard ...
Pressure: 160 bar - 400 bar
Temperature: 200 °C
... high pressure non return valve, both sides female thread, opening pressure 0,5 bar - 1,0 bar, material: 1.4571 ...
DN: 50 mm - 600 mm
Pressure: 16 bar
... length - Wafer long, acc. EN 558 / ISO 5752, Serie 16 Body material - Grey cast iron Nodulair cast iron Steel cast Stainless steel cast Aluminiumbronze / bronze Sealing - Rubber seat ...
DN: 15 mm - 150 mm
Pressure: 20 bar - 40 bar
Temperature: -196 °C - 120 °C
... The 05418 series from Herose is a cyrogenic- check valve that is equipped with a bronze cap and body made from stainless steel material. Designed with a spring in the structure, it has ...
HEROSE
Pressure: 207 Pa
Temperature: -184 °C - 232 °C
... Ball check valves allow free flow in only one direction, prevent backflow, and are for applications where poppet style valves may not be suitable (such as media with contamination, viscous fluids, etc.). ...
DN: 20 mm - 150 mm
... quick-installment check valve Operating Principle Technical Parameter Installing Dimension Documents Downloads 1.Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...
DN: 15 mm - 150 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -15 °C - 100 °C
... The valves in series W6 are disc wafer spring check valves, which are manufactured in accordance with the relevant product standards, and in conformity with the quality requirements of EN ISO 9001. They ...
Brandoni
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 150 °C
Flow rate: 170 l/min - 1,050 l/min
... is a lack of air problem. ➜ Materials and components - AISI 316 L (1.4404) stainless steel body - piston in stainless steel AISI 304 - spring made of AISI 302 stainless ...
SENGA
DN: 0.125 in
Pressure: 207 bar
Temperature: -23 °C - 190 °C
... 316 SS, CV Series Check Valve, 1/8" Tube Fitting, Fluorocarbon FKM O-Ring, 3000psig(207bar), -10°F to 375°F(-23°C to 190°C), Fixed Cracking Pressure 1/3psig(0.02bar) Body Material316 Stainless Steel Port ...
DN: 50 mm - 900 mm
Pressure: 150 bar - 2,500 bar
... Dual Disc Lug Type Check Valve Body Material: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Aluminium Bronze Disc: Ductile Iron, Stainless ...
DN: 5, 5.5, 4.6, 5.8 mm
Pressure: 0.1 bar - 10 bar
Flow rate: 8.6 l/min - 34 l/min
... Directional flow control Cleaning, washing and degreasing systems Foot valves Mixing of detergent solutions Stainless steel and PVC non-return valves POM (Delrin) Venturi tube ...
the best suppliers