Standard valves

DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C

... compared to standard actuated valves. Operating life has been tested to well over 1,000,000 cycles, the balanced design reduces friction and wear. The stroke is linear and parallel to the flow reducing the force to close ...

DN: 0.75, 0.5 in
Pressure: 6 bar
Temperature: 0 °C - 80 °C

... Connectivity standard External thread GAS cylindrical ISO 228/1 Connectivity standard Bucchi srl for pipe fittings adopts as standard connection ISO 228/1; in order ...

... Interlock function: Only active valve and passive valve are mated completely, then can open the transfer channel. When the transfer channel is opened, the passive valve cannot be disconnected. Technical ...

DN: 24 in - 36 in

... ” Cast Iron PEC Eccentric Plug Valves with Mechanical Joint (MJ) end connections and NBR plugs. Manual actuators are configurable with handwheel or 2” nut. The interiors and exteriors can accept any of DeZURIK’s standard ...

DN: 40 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: 60 °C

... V2000. Flanged type: DN40 up to 200 in standard, DN250 on request Working pressure: 10 bar, 16 bar, 25 bar, 40 bar Flanges drilling according to standard EN 1092-2 and ISO 7005-2: ISO ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

DN: 0.75, 1 in
Pressure: 35, 42 bar
Temperature: -20 °C - 120 °C

DN: 13 mm - 45 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

... BRASS BALL VALVES [Technical Specification] Standard Bore Thread Connections Comply With ISO228 Material Standard brass ; CW617N; DZR Working Pressure PN25 or 2.5Mpa Seal ...

DN: 0.5 in - 4 in
Pressure: 0 bar - 6 bar
Temperature: -20 °C - 150 °C

... Standard temperature range (comprising actuator) -20° / +80° Female-female GAS ends Male-male DIN ends Clamp-clamp BS type ends Welding-welding ends Complete of ISO211 actuator bracket ...

DN: 200 mm - 1,800 mm
Pressure: 16 bar - 31 bar
Temperature: -10 °C - 50 °C

... double eccentric butterfly valve represents the essence of an efficient butterfly valve designed for when economy is a high priority. BTF-E is functional and reliable, providing reduced complexity. It covers the ...

DN: 25 mm - 450 mm
Pressure: 63, 25, 40, 10, 16 bar
Temperature: -40 °C - 450 °C

... Control valves type Z33 (previous name: BR33) represent one of the valve designs, where change in flow ratio is achieved through an eccentrically set rotary plug. Such structures are particularly useful for control ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... pressure test is achieved before dispatch or warehousing. Our tests are conducted according ISO 5208 international standard. Fugitives Emissions Our valves are tested according TA LUFT 02/27/1986 ...

DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 120 °C

... Brass ball valve threaded standard port Elephant RP.BRASS.120.MM 232 PSI with electric actuated 110VAC without limit switches controls water, air, oil and other media compatible with the materials of construction. Ideal ...

DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C

... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with standard accessories: ...

Pressure: 64, 130 bar

... Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ASME ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

... diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The chemical resistance of the valve is subject to the type of fluid, the temperature, the pressure, as well as the ...

DN: 100 mm - 1,200 mm
Temperature: -100 °C - 550 °C

... bubble tight shutoff. For flanged end valve, the shaft is positioned at the flange side which reduced the possibility of external leakage caused by the ambient temperature changed. Specifications: VALVE DESIGN ...

DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa

... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...

DN: 0.25 in - 3 in
Pressure: 1,500, 2,000 psi

... 304 ( ASTM-A351-CF8/ EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end Locking device, DIN standard M3 length, Spring handle ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

... the KÜHME High-Performance Class. KVF- Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This electro pneumatic globe valve is setting a new industrial standard ...

DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C

... – shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer bellows with long ...

DN: 50 mm - 1,500 mm
Temperature: -196 °C - 593 °C

... 3-pcs Ball Valve Product type - On/Off Valve - Valve Type - 3-pcs Ball Valve - Model - Q*47F/H - Size - NPS 2～NPS 60 Standard - API 6D/API 608/BS5351/ISO ...

DN: 15 mm - 600 mm
Temperature: -50 °C - 600 °C

... Russian Standard GOST Gate Valve Z44 (30с41нж, 30с64нж, 30с15нж,30с76нж,30с45нж) Technical Specifications： (1) Design Standard: GOST 5762-2002 (2) Face to Face Dimension: GOST 3706-93 (3) End Flange ...

DN: 15 mm - 100 mm
Pressure: 63 bar
Temperature: -20 °C - 180 °C

... shaft seals: PTFE PN-63 (1000 wog). For food grade sanitary use. Interior polished. Flange for mounting ISO5211 actuators, ISO 2852 clamp ports. Working temperature: -20ºC to + 180ºC. Explosion proof stem. ...

DN: 200 mm

... Fully welded ball valve, standard model, available in the sizes up to DN 200 (8”) full bore or to DN 300 (12”x8”) reduced bore, PN 10÷50 or ANSI 150-300, in carbon steel with floating ball in stainless steel or nickel ...