Pressure: 200 bar
Temperature: -20 °C - 65 °C
... advantages - High pressure brass cylinder valve for Inert, Inert mixtures and flammable gas service - Permanent gas tight seal - π marking according TPED directive - Tested according EN ISO 10297 and CGA V9 standards - ...
DN: 6 mm - 40 mm
Pressure: 1.5 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 10 mm
Pressure: 0 bar - 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 1.78 mm
Pressure: 500 psi
... Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About 9g in stainless ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 0 psi - 500 psi
... Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The MBVMD allows bi-directional flow between a common inlet port on the bottom of the valve, ...
Beswick Engineering Co, Inc.
DN: 0 mm - 0.81 mm
Pressure: 0 bar - 34.7 bar
... available. The valve body (elbow) swivels 360 degrees to facilitate installation and orientation. Features: Stainless steel valve seat allows flows to remain steady despite changes in temperature Compact ...
Beswick Engineering Co, Inc.
DN: 125, 150 mm
Pressure: 10 bar
... selected by FIP according to their quality and reliability requirements. The efficiency of these valves, tested according to the company’s quality standards, is guaranteed by the expertise and know-how that FIP dedicates ...
FIP - Formatura Iniezione Polimeri
DN: 200 mm
Pressure: 10 bar
... selected by FIP according to their quality and reliability requirements. The efficiency of these valves, tested according to the company’s quality standards, is guaranteed by the expertise and know-how that FIP dedicates ...
FIP - Formatura Iniezione Polimeri
DN: 40, 100, 50, 65, 80 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 60 °C
... Butterfly valve with multi-volt electric actuator 90-240 V AC 50-60 Hz. The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications. In addition to the manually ...
FIP - Formatura Iniezione Polimeri
DN: 0.25 in - 2 in
Pressure: 800, 1,000 psi
Temperature: -5 °C - 175 °C
... Connection Type: Thread Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 800psi (56kg/cm2) for 1-1/4”~2”; Valves inspected and tested according to API ...
DN: 0.25 in - 4 in
Pressure: 800, 600, 1,000 psi
Temperature: -5 °C - 175 °C
... Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 1/4"~1"; 800psi (56kg/cm2) for 1-1/4"~2"; 600psi (42kg/cm2) for 2-1/2"~4" Valves inspected and tested ...
DN: 0.25 in - 3 in
Pressure: 0 bar - 69 bar
Temperature: -18 °C - 260 °C
... Technical Data • - ISO 5211 Direct Mounting Pad • - Full Port • - Investment Casting • - Design: ASME B16.34 • - Valves Inspected & Tested according to API 598 Standard Material: EN10213-1.4408 , EN10213-1.4308 ...
DN: 8 mm
Temperature: 5 °C - 50 °C
... These 8 mm proportional direct-acting valves provide precise, linear control for accurate dosing and flow regulation in critical applications. With low power consumption, they offer excellent energy efficiency while maintaining quiet ...
Pressure: 30 psi - 100 psi
Temperature: 32 °F - 180 °F
Flow rate: 420 l/s
... Pow-R-Amp vacuum console regulator obtains air flow rating of 100 psig or 15 standard cubic feet per minute, with nominal pressure rate scale between 30 and 100 psig. Ideally, this controller is used on Voltage in Alternating Current ...
DN: 35.69 mm - 38.1 mm
Pressure: 2 bar - 7 bar
Temperature: 0 °C - 60 °C
... The GEMÜ Q30 2/2-way pinch valve has a plastic piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate media. The compressor's specially ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 12 mm - 20 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 80 °C
... Diaphragm valve - 610 The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 10, 8, 4, 15, 6 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C
... Diaphragm valve - 601 The GEMÜ 601 2/2-way diaphragm valves have a temperature resistant plastic handwheel and are manually operated. The GEMÜ 602 valve has a stainless steel handwheel and is manually ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0 mm - 10,000 mm
Pressure: -10 bar - 7,000 bar
Temperature: -273 °C - 2,000 °C
... Overview
- HD SERIES high-pressure pneumatic diaphragm valve designed for ultrahigh-purity applications, suitable for semiconductor, laboratory and other high-tech industries.
Features
- High-purity
DN: 0 mm - 10,000 mm
Pressure: -10 bar - 7,000 bar
Temperature: -273 °C - 2,000 °C
... Manual Low-Pressure Diaphragm Valve LD SERIES — UHP High-Temperature, Zero-Dead-Volume
Product application and purpose
The LD SERIES manual low-pressure diaphragm
valve is designed for ultra-high-purity ...
DN: 3.175 mm - 25.4 mm
Pressure: 0 bar - 1,379 bar
Temperature: 0 °C - 538 °C
... Duplex, Monel & Hastalloys in forged & bar stock construction. Variety of end connections: Male & Female NPT, BSPP, BSPT, ISO tapered pipe ends & PANAM® tube fittings Non-Rotating vee tip / Ball tip provides repetitive & leak tight ...
DN: 3.175 mm - 12.7 mm
Pressure: 0 bar - 1,034 bar
... Materials: SS 316, Duplex, Monel & Hastalloys. Standard Orifice: 4.8mm. Relief pressure adjustable externally. Lock wire feature secures a given pressure setting. NACE certification available upon request. Heat code traceability. ...
DN: 12.7 mm - 19.05 mm
Pressure: 0 bar - 689 bar
Temperature: -273 °C - 538 °C
... Materials: SS 316, Duplex, Monel & Hastalloys. Non-Rotating vee tip / ball tip provides repetitive & leak tight shut-off. Available with soft seat option. NACE certification available upon request. Heat code traceability. ...
Temperature: -40 °F - 350 °F
DN: 200 mm - 2,000 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 750 °C
... gases, these valves are generally installed on big bag filters or in waste heat recovery circuits, directing the gases to a heat exchanger, or alternatively, to the atmosphere through a chimney. Diverter valves, also ...
DN: 50 mm - 300 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 80 °C
... butterfly valve with vulcanized hard rubber lining for saline media (seawater or well-desalination) or corrosive media, is designed to withstand the chemical attack of chloride ions. Due to the fluid’s aggressivity, standard ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
Pressure: 0 bar - 16 bar
... ! Super Trap series use motorized stainless steel ball valves. Durable materials are selected to ensure product quality and effectively maintain product service life. In addition to standard functions, Counter series ...
DN: 25 mm
Pressure: 40, 25, 16 bar
Temperature: -20 °C - 120 °C
... Ball valves, unlike the types of valves previously mentioned, use an opening and closing action. Thanks to a specific valve, moreover, it performs a rotation limited to an angle of 90°. Ball valves ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...
DN: 0.5 in - 4 in
Temperature: -30 °C - 200 °C
... Face to Face - ASME B 16.10 (Flange end) Pressure Class - 150# Design Standard - ASME B16.10, ASME B16.25, ASME B16.34 ASME B16.5, API 598, BS EN ISO 17292, ISO 5211 Body Material - CF8 / CF8M / WCB ...
UFLOW AUTOMATION
DN: 15 mm - 100 mm
Temperature: -30 °C - 200 °C
... Face to Face: - MFG. Standard Pressure Class: - 150# Design Standard: - ASME B16.ll, ASME B16.34, API 598, BS EN ISO 17292, ISO 5211 Body Material: - CF8 / CF8M / WCB / CF3M Bail ...
UFLOW AUTOMATION
DN: 0.5 in - 4 in
Temperature: -30 °C - 200 °C
... Face to Face - ASME B 16.10 (Flange end) Pressure Class - 150# Design Standard - ASME B16.10, ASME B16.25, ASME B16.34 ASME B16.5, API 598, BS EN ISO 17292, ISO 5211 Body Material - CF8 / CF8M / WCB ...
UFLOW AUTOMATION
DN: 800 mm - 1,400 mm
Pressure: 1 bar - 25 bar
Flow rate: 3,900 m³/h - 23,200 m³/h
... The valve shall be made with high hydrodynamics section globe body, without stagnation pockets (conical, low pressure loss type), the main valve body and cover shall be made in standard ductile cast iron ...
DN: 25 mm - 150 mm
Pressure: 6 bar
... (DN40-150) as standard. VMC series air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air ...
AKO ARMATUREN
DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar
... air operated pinch valves have a very wide and practically unrestricted field of application. Furthermore, a selection of four different flange types supports the diverse range of application of the VF series air operated pinch valves The ...
AKO ARMATUREN
DN: 25 mm - 450 mm
Pressure: 3, 4, 2 bar
... operated pinch valves of the RVA series can be made with a flange connection complying with ANSI B 16.5- 150lbs, if required. Structure of RVA series The RVA series air operated pinch valves consist of the essential ...
AKO ARMATUREN
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 200 °C
... Stem seal: TFM 1600 V-pack • Additional seal on stem with FKM O-ring • Anti Blow-out stem • Actuator connection as per standard ISO 5211 • Closing angle >7° • Superficial treatment: blueing FEATURES ON REQUEST • ...
OMAL Spa
DN: 0.25 in - 0.5 in
Pressure: 7,250 psi
... instrumentation valve. Actuator ready with ISO plate. Design Threaded body Automation-ready with standard ISO 5211 connecting plate Total HermetiX Integrity package with: ISO ...
HABONIM
DN: 50 mm - 1,200 mm
Pressure: 0.6 bar
Temperature: -30 °C - 500 °C
... Rectangular knife gate valve with pressure-encapsulated and self-cleaning body with raised sealing surface for secure seating and valve blade guidance and free opening cross-section. Intermediate flange design in short ...
DN: 0.5 in - 2 in
Pressure: 600 psi
Temperature: -30 °C - 200 °C
... Reduced Bore, Lever Handle, Floating Ball Design to EN488 Pressure test to EN12266.1 ...
Taloar
DN: 6 mm - 50 mm
... Providing products from standard forged valves to the most innovative block technology, each and every Pure-Flo valve is engineered to the highest standards. • Bonnet isolation: The diaphragm ...
AERRE INOX Srl
DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C
... 2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The manual actuation ...
A. u. K. Müller
the best suppliers