Steel washers

Internal diameter: 15 mm - 58 mm
External diameter: 28.4 mm - 108.71 mm
Thickness: 3.1 mm - 7.6 mm

... HYTORC J-Washer takes the HYTORC Reaction Washer to an entirely new level by adding a locking feature that minimizes loosening to keep bolts tight under dynamic loads. With the strategic placement of ...

... F3394M Standard Specification for Hardened Washers The HYTORC Washer is manufactured in accordance with the requirements in the ASTM F3394/F3394M Standard Specification for Hardened Steel ...

Internal diameter: 8 mm - 12 mm
External diameter: 32 mm
Thickness: 14 mm

Used in connection with clamping screws, e.g. star knob screws, washer rings with axial ball bearing GN 6344 have the following advantages: - as much as twice the clamping force through lower surface friction - fixed ...

Internal diameter: min 1.2 mm
External diameter: max 1220.0 mm
Thickness: min 1.5 mm

SPIROL manufactures specialty Precision Shim Washers and Spacers in any flat configuration with thicknesses ranging from 0.02mm to 6mm (.001” to .250”) to meet the requirements of unique applications. Most secondary processes ...

Internal diameter: 4.3 mm - 31.02 mm
External diameter: 8.6 mm - 56 mm
Thickness: 2 mm - 6.3 mm

... LOCK® product line involves lock washers, screws and nuts RIPP LOCK® lock washer RIPP LOCK® screw lock is provided with radial ribs and replaces such locking elements as spring washers ...

Internal diameter: 13 mm - 25 mm
External diameter: 14.2 mm - 28 mm
Thickness: 4.6 mm - 10 mm

DIN 6319 spherical washers for inclined position adjustment of anchor bolts. By using bolt-on and bolt-through Jacmount® Adjustable Levelers and AirLoc Wedgmount® Precision Levelers including spherical seat.

Internal diameter: 13 mm - 38 mm
External diameter: 40 mm - 110 mm
Thickness: 8 mm - 23 mm

Isolating washers for vibration decoupling of anchor bolts. By using bolt-through Jacmount® Adjustable Levelers and Wedgmount® Precision Levelers with AirLoc isolation. Isolating washer for vibration ...

Internal diameter: 13 mm - 38 mm
External diameter: 40 mm - 110 mm
Thickness: 8 mm - 23 mm

Isolating washers for vibration decoupling of anchor bolts. By using bolt-through Jacmount® Adjustable Levelers and Wedgmount® Precision Levelers with AirLoc isolation. Isolating washer for vibration ...

TOOTHED PLATE CONNECTOR EN 912 (DIN1052) | TYPE C 11 SINGLE-SIDED AND C 10 DOUBLE-SIDED Complete formation of the pin as per DIN 1052, only possible due to natural sand production Final inspection for cracking and missing ...

Internal diameter: 8.4 mm - 13 mm
External diameter: 40 mm
Thickness: 3 mm

Special items Washers Ideal dimensions for use in connection with strut channel system PACKAGING:100 pcs/box MATERIAL:Steel, minimum hardness 130 HB galvanised as per DIN EN ISO 4042, stainless ...

Thickness: 7 mm

Semicircular washer Malleable cast iron EN-6JMB-350-10 23 x 26 x 7 mm With hole 12 mm

Internal diameter: 2.2 mm - 31.4 mm
External diameter: 4 mm - 52 mm
Thickness: 0.5 mm - 4 mm

PLAIN WASHER TYPE Z - STAINLESS STEEL A2 - NFE 25-514 INOX A2 - NFE 25-514

Internal diameter: 5.3 mm - 13 mm
External diameter: 10 mm - 20.5 mm
Thickness: 1.2 mm - 2 mm

INTERNAL TOOTHED LOCK WASHER - STAINLESS STEEL A2 - DIN 6797 J INOX A2 - DIN 6797 J

Internal diameter: 2.1 mm - 36.5 mm
External diameter: 4.4 mm - 58.2 mm
Thickness: 0.5 mm - 6 mm

SPRING LOCK WASHER WIDE SECTION - STAINLESS STEEL A1 - DIN 127 B INOX A1 - DIN 127 B

The protective shield is used when through-holes must be set in the area of the module cover. As a result, the module cover is protected from damage.

Internal diameter: 7.1 mm - 56 mm
External diameter: 12 mm - 92 mm

Case hardened. Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas (not allowed for elongated holes, we recommend DIN 6319G for these).

Internal diameter: 4 mm - 10 mm

Bended washer *** Also available in stainless steel material

Internal diameter: 7.5 mm - 32 mm
External diameter: 38 mm - 97 mm
Thickness: 9.8 mm - 15.8 mm

Material Countersunk screw Steel, blackened, quality 5.8 Captive C-Washer Heat-treated steel, tempered, blackened

Internal diameter: 8.4 mm - 17 mm

Spherical washers / Conical seats are used as washers in a screw connection to compensate non-parallel surfaces. Material Spherical washer Case-hardened steel, ...

Internal diameter: 8.4 mm - 17 mm
External diameter: 23 mm - 45 mm
Thickness: 4 mm - 6 mm

The heat-treated shaft / plain washers (washers) are manufactured according to DIN 6340. Material Heat-treated steel, tempered, punched, mechanically trued, phosphatized

Internal diameter: 4.3 mm - 12 mm
External diameter: 16 mm - 52 mm
Thickness: 3 mm - 6 mm

Internal diameter: 4 mm - 12 mm
External diameter: 10 mm - 40 mm
Thickness: 2.5 mm - 7.5 mm

Internal diameter: 6.4 mm - 21 mm
External diameter: 13 mm - 40 mm
Thickness: 7 mm - 20.3 mm

Internal diameter: 2.7 mm - 8.4 mm
External diameter: 6.8 mm - 20 mm
Thickness: 1 mm - 3.5 mm

Finishing washer provide excellent protection againts damage. Suitable for use with flat head and oval head screws. They give a more finished look compared to a standard flat washer

Batch size: 100 unit

Domed washer, DIN 15237, in steel or stainless steel

Internal diameter: 3.5 mm - 24 mm
External diameter: 7.3 mm - 48 mm
Thickness: 1.3 mm - 9 mm

SQWS Spherical Washers are useful to allow some misalignment of bolt angles. They can absorb up to 3 degrees of misalignment. Standard sizes are from M3-M24. Available in Steel and Stainless ...

Internal diameter: 3.4 mm - 79.1 mm
External diameter: 7 mm - 110 mm
Batch size: 1 unit - 200 unit

... easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) ◾Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts ◾Available in steel or stainless ...

External diameter: 14 mm - 30.7 mm
Batch size: 200, 100 unit

... Permanent securing and correct positioning of HEICO-LOCK® Wedge Lock Washers ◾Can be re-used several times ◾Cost savings through increased productivity ◾Available in steel or stainless steel ...

Internal diameter: 4.4 mm - 27.9 mm
External diameter: 9 mm - 39 mm
Batch size: 100, 200 unit

... RING LOCK WASHERS HEICO-LOCK® Ring Lock Washers provide high-quality, user-friendly bolt securing for the most demanding of applications and are ideal for repeated use. The ring locking system guarantees ...

... request and according to a drawing. Washers and contacts are realized with many materials such as monel, tinned copper clad steel, stainless steel, beryllium copper, ...

Internal diameter: 6.4 mm - 25 mm
External diameter: 13 mm - 44 mm
Thickness: 2.5 mm - 8.2 mm

... self-aligning washers, these two-piece washer sets work together to compensate for misaligned parts. These washers are commonly used in fixturing and clamping applications. The parts ...

Batch size: 100 unit

Approved countersunk washer for construction screw VELOX®. It is yellow galvanised and suitable for screws Ø 8 mm. The countersunk washer with an outer diameter of 25 mm ensures an increased contact ...