Diameter: 15, 20, 25, 30 mm
... Tube connectors 20x20 wall thickness 1,5 PA, black (with steel core) ...
emico
... Product name： Intermediate connector Product number： 46-60-6630 Weight： 1.9kg Time on shelves： 2016-10-29 Browsing times： 219 ...
wenzhou keala hardware co.,ltd
Diameter: 3 mm - 18 mm
... Maintenance of equipment in the factory and the installation process,often need different types and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and SAE AS 71051:1999 (NPT) ...
Diameter: 1 in - 10 in
... The famous 2-step premium gastight integral upset connection. TPS Multiseal connections are suitable for service in the most severe well conditions such as HP/HT, deviated, horizontal, deep wells and corrosive environments. It is the preferred connection ...
TPS TECHNITUBE RÖHRENWERKE GMBH
Diameter: 30 mm
... Brinck Tubular Connectors product range, sorted by diameter Proven quality – prEN ISO 14122-3 All Brinck tubular connectors are made of high-quality aluminium alloys according to ...
Ernst Brinck & Co. GmbH
... thread and the connection for flexible tube. The connector features a rotating nut with GL thread on the one hand and a G male thread or connecting elements on the other hand. Various connection elements, ...
EM-Technik GmbH
Diameter: 6 in - 12 in
... on-site use. Not only does this speed up the assembly, it opens up the possibility of reusing the connector multiple times. The Primus Line M- Connector is available in nominal diameters from 6 inches up to 12 inches ...
Diameter: 72 mm - 515 mm
... rigid steel pipes with a minimum wall thickness are used under static load. Use the Technical Manual for other pipe materials. Band inserts are necessary for special applications. Support sleeves must be used for thermoplastic ...
PEWOBAR GmbH
... Aluminium GD End cap MW 90 R 90°, grey, Part. N° 22.0980/1 Angle 45°, Part. N° 21.1708/2 Angle 19 GD-Z, Part. N° 21.2078/2 Fastening kit Weight 0,267 kg Applications Corner connections of profiles 90 R 90° Constructions ...
... 9 Fold Section Model : AN-103 Main Material and Finish: Steel Item: T-Joint, Stiffener Joint ...
... Nominal dimension: 20 mm Panel thickness: 10 mm Weight: 80 g ...
AROSIO F.LLI SRL
... Corrugated metal hose with and without external braiding and metal pump connectors to absorb vibration, misalignment, and piping thermal expansion or contraction. Options include rubber covering, unique ...
Diameter: 6.35 mm - 28.58 mm
... Short description
ZoomLock PUSH - Optimized are tool-free, push-to-connect refrigerant fittings designed to enable faster, cleaner and flame-free connections for HVAC/R piping. They provide a braze-free assembly solution for systems using common ...
Diameter: 0.1 mm
... Fitting: Screw: No. 10-32 UNF; Material: SUS316L (removable from
tube)
Wetted materials:
Tube inner surface: SUS316L; Tip: PEEK
Ordering Information
Description — P/N —
Tube Length ...
Diameter: 8 mm - 20 mm
... T-piece, stainless steel Material: Stainless steel Min. contact surface of gasket: 2 mm ...
Diameter: 22.1 mm - 34.8 mm
... Product Overview
Versilon® Bevel Seat Fitting, Style 20 from Saint-Gobain is a sanitary connection designed for easy threaded assembly and disassembly using an Acme nut. It is intended for hygienic and bioprocess applications where cleanability ...
Diameter: 5 mm
... entry and exit is via UNF 28 female threads and PTFE pipe connectors, 1 with a Luer Swagelok® fitting for sample application using a syringe. Sample may be syringed into or pumped through the tube as ...
Diameter: 2.8 mm
... Available for standard
tube sizes 1/4”, 3/8” and 9/16”; fittings are offered with both metric and imperial threads.
For pressure ratings 2,500 bar (35,000 psi) and 4,200 bar (60,000 psi) the connection uses a 58° external cone at the ...
... Connecting and disconnecting multiple fluid lines is quick and simple with the Beswick eight line quick disconnect. The design features a releasing sleeve that permits one-hand disconnections and incorporates a keyed location pin ensuring correct orientation ...
Diameter: 6 mm - 6 mm
... Short description
Weld-on
tube union for hydrogen applications, three-part design (weld-on stub, clamping nut, weld-on screw stub). Series H2-M7A3. Nominal diameter DN3; pressure rating up to PN700 (700 bar). Material: DIN EN ...
... Product description
Flex Connect is an FDA-approved silicone connection
pipe that enables quick, tool-free connection to process equipment without a tri-clamp. It provides dust-tight and watertight transfer for tablets, capsules ...
Diameter: 100 mm
... The Green Blow Air Line is enriched with a new component: T Joint 100 M/M/M. This component provides greater flexibility to the system, allowing two air knives– or diffusers – to be connected to the same Green Blow. This solution is ideal for small ...
Diameter: 0 mm - 3,000 mm
... br>
CAPPING END OF TUBE (METRIC)
- Configuration available for metric tube sizes.
- Intended application: ultra high purity gas piping and distribution systems.
CAPPING ...
Jewellok
Diameter: 0 mm - 3,000 mm
... gas distribution systems, providing compression
tube-to-
tube connections in both metric and inch sizes.
Configurations
- TUBE (METRIC) TO TUBE (METRIC)
- TUBE
Jewellok
Diameter: 6 mm - 10 mm
... industrial, semiconductor, laboratory and medical environments.
Tube Configurations
- Tube (metric) to Tube (metric)
- Tube (metric) to Tube
Jewellok
Diameter: 4 mm - 8 mm
... male thread G1/8; tube OD 4 mm; nominal bore ~3 mm; -0.95 to 14 bar
Diameter: 6 mm - 12 mm
... Multi Tee
Diameter: 150 mm
... Description
Inline ducting
connector GHTG269 designed to join ducts with a 150 mm internal diameter (ID). Constructed in 304 stainless steel with a 148 mm outer diameter (OD), 1.5 mm wall thickness and 400 mm length. Intended ...
Diameter: 1.6 mm
... Connector - 6-40 UNF Rigid tube connector Ferrule - PEEK Plug - PEEK Main Features - 1. The size of the connector is small, saving fluid space 2. End face seal, reliable and no ...
Keyto Fluid Technology
Diameter: 12 mm
... M12 / 4 pin female connector 90° angled 5m or 10m PVC or PUR cable IP67 protection M12/4 Pin Female Connector, 90° Angle, 5m or 10m PVC or PUR Cable GENERAL SPECIFICATION - –> Rated Operational Voltage - ...
Diameter: 25 mm - 100 mm
... Tee terminal for load taps. Used in low-pressure gas installations for VI and VII type conduits (up to 0.5 bar). Materials: - Carbon steel trunk according to ISO 3183/API 5L raw. - Threaded sleeve in ASTM A105 steel. Certifications: - Inlet and outlet ...
MACPLAST SRL
Diameter: 2,200 mm
... installed after vertically divided flaskless mouldlines. Due to linear vibrations, whose vector is in a right angle to the tube axis, the drum content (castings and sand) gets into a circular movement. Because of this movement the castings ...
... pressure, high temperature, abrision, flame and fire. Application: Broadly used in the connection between inner blast pipe and outer blast pipe, the connection of choke and kill line, conveying oil, gas, mud and other high pressure ...
Diameter: 10 mm
... TUBE, CONNECTING, T-SHAPE Tubing O.D. (mm)10 Tubing O.D. (mm)：10 ...
Synthware glass
Diameter: 6, 8 in
... Male elbow Male connector Male branch tee Male run tee Union tee Union elbow Accessories Nipple Male plug 2 way valve Elbow filter Tee selector Swivel connectors ...
... Degassing Connector Prevents discharge problems caused by the gas lock phenomenon. With sodium hypochlorite and similar materials that easily generate decomposed gas, the gas lock phenomenon occurs and makes the pump unable to discharge. Installing ...
When installed properly, BEULCO wall ducts guarantee reliable sealing between the supply and disposal lines and the wall duct. The wall ducts are sealed against water, oppressive groundwater and stray gas.
the best suppliers